Mechanical engineering topic list of research papers
-
Exhaust Gas Energy Recovery Via Electric Turbocompounding
Abstract This paper presents the development of a high performance Low Pressure Turbine for turbocompounding applicationsindownsized gasoline engines. The LPT was designed to fill the existing technology gap where no commercially available turbines...
2015 / A.M.I Bin Mamat, R.F. Martinez-Botas, M.C. Chiong, S. Rajoo, Simon Petrovic, et al. -
Effect of intelligent speed adaptation technology on older drivers’ driving performance2013 / Weihong Guo, Katerina Pavkova, Dan Brennan, Simon Edwards, Philip T. Blythe
-
Traceable Measurements on Machine Tools - Thermal Influences on Machine Tool Structure and Measurement Uncertainty
Abstract Flexible manufacturing processes for high quality products at low costs are one of the main research objectives in the field of production technology. The quality inspection of large or complex workpieces manufactured on machine tools often ...
2015 / Robert Schmitt, Martin Peterek -
Assessment of activity-based pyroprocess costs for an engineering-scale facility in Korea
Abstract This study set the pyroprocess facility at an engineering scale as a cost object, and presented the cost consumed during the unit processes of the pyroprocess. For the cost calculation, the activity based costing (ABC) method was used...
2015 / Sungki Kim, Wonil Ko, Sungsig Bang -
Multi-robot Spot-welding Cell Design: Problem Formalization and Proposed Architecture
Abstract The multi-robot cell design for car-body spot welding is faced by industry as a sequence of tasks, where researches are focused on issues of the problem as a whole. In authors’ knowledge, none work in literature have suggested any...
2014 / Stefania Pellegrinelli, Nicola Pedrocchi, Lorenzo Molinari-Tosatti, Anath Fischer, Tullio Tolio -
Scalability of the parallel CFD simulations of flow past a fluttering airfoil in OpenFOAM2015 / Petr Šidlof, Václav Řidký
-
Linear Unsteady CFD of Vibrating Blades of Turbomachinery
Abstract This paper presents the numerical calculation of unsteady aerodynamic forces on the vibrating cascade blade row using the implicit time integration method. It is confirmed that first and second-order Euler methods, which are the implicit...
2014 / H. Ishida, N. Yamasaki, M. Aotsuka -
Entropy generation due to MHD flow in a porous channel with Navier slip
Abstract Effects of magnetic field and Navier slip on the entropy generation in a flow of viscous incompressible electrically conducting fluid between two infinite horizontal parallel porous plates under a constant pressure gradient have been...
2014 / Sanatan Das, Rabindra Nath Jana -
Polycarbonate as an Elasto-Plastic Material Model for Simulation of the Microstructure Hot Imprint Process2013 / Birutė Narijauskaitė, Arvydas Palevičius, Rimvydas Gaidys, Giedrius Janušas, Rokas Šakalys
-
Adaptive Robust Sliding Mode Vibration Control of a Flexible Beam Using Piezoceramic Sensor and Actuator: An Experimental Study2014 / Ruo Lin Wang, H. Gu, G. Song
-
Research on Embedded Numerical Control System Hardware Platform Based on ARM9
Abstract This essay puts forward a multifunctional numerical control system, which is on the basis of ARM9 core microprocessor. It takes Samsung S3C2440A microprocessor as its operation core, in the pattern of dual-CPU, in order to automatically...
2011 / Yue Wang, Jiaying Zhang -
Model tracking controller design of robot manipulator system with disturbances2015 / D. Wang, S. Wu, G. Wang, S. Okubo
-
Observer-Based Output Feedback Control with Linear Quadratic Performance
Abstract This paper discusses about the use of LQ performance optimality in the design of observer-based output feedback control for uncertain system with exogenous disturbance. The variable structure control law is adopted to compensate the...
2013 / M.Nizam Kamarudin, S.Md. Rozali, A.Rashid Husain -
Nonlinear Dynamic Response of Functionally Graded Rectangular Plates under Different Internal Resonances2010 / Y. X. Hao, W. Zhang, X. L. Ji
-
Abrasive Particles Trajectory Analysis and Simulation of Cluster Magnetorheological Effect Plane Polishing
Abstract Kinematics model of abrasive particles for certain eccentric and linear interpolation swing uncertain eccentric, uncertain eccentricity of X direction and Y direction in plane polishing based on cluster magnetorheological(MR) effect are...
2012 / Jisheng Pan, Qiusheng Yan, Xipeng Xu, Jiangting Zhu, Zhancheng Wu, et al. -
Advanced Method of NC Programming for 5-Axis Machining
Abstract This paper presents a method to simultaneously increase the accuracy and decrease the calculation time for complex tool path programming in multi-axis machining centers. Examples of complex parts requiring such complex tool paths include...
2012 / Sergej N. Grigoriev, A.A. Kutin, V.V. Pirogov -
Issues Related to Parameter Estimation in Model Accuracy Assessment
Abstract Model Accuracy Assessment (MAA) is an important part of the modern verification and validation process. This involves not only evaluation of a validation metric comparing experimental versus simulation system response quantities, but also...
2013 / Thomas C. Henderson, Narong Boonsirisumpun -
Sensitivity Analysis of Saturated Steam Production in Parabolic Trough Collectors
Abstract Thermal and synthetic oil is the most common fluid used as heat transfer fluid in parabolic trough collectors for steam generation or producing high volumes of hot water. The solar field configuration using oil is the unfired-boiler...
2012 / Loreto Valenzuela, David Hernández-Lobón, Eduardo Zarza -
A Novel Wireless and Temperature-Compensated SAW Vibration Sensor2014 / Wen Wang, Xufeng Xue, Yangqing Huang, Xinlu Liu
-
Modeling and Simulation of Astronaut Motions during Extravehicular Activity: A Complex System Based Method
Abstract Special analysis of astronauts’ motions must be carried out before extravehicular activities in order to design the missions and build the guideline for astronauts training. A method of modeling and simulation of astronauts’ motions during...
2013 / Hao Li, Ying Jin, Chunhui Wang