Mechanical engineering topic list of research papers
-
Design Optimization of a Speed Reducer Using Deterministic Techniques2013 / Ming-Hua Lin, Jung-Fa Tsai, Nian-Ze Hu, Shu-Chuan Chang
-
Micro Surface Defect Detection Method for Silicon Steel Strip Based on Saliency Convex Active Contour Model2013 / Kechen Song, Yunhui Yan
-
Empirical Study of Travel Time Estimation and Reliability2013 / Ruimin Li, Huajun Chai, Jin Tang
-
Numerical Investigation of a Liquid-Gas Ejector Used for Shipping Ballast Water Treatment2014 / Xueguan Song, Maosen Cao, Wonhyup Shin, Wenping Cao, Sanghoon Kang, et al.
-
Dynamic Reliability Analysis of Gear Transmission System of Wind Turbine in Consideration of Randomness of Loadings and Parameters2014 / Lei Wang, Tao Shen, Chen Chen, Huitao Chen
-
Erratum to “Verification, Validation, and Testing of Kinetic Mechanisms of Hydrogen Combustion in Fluid-Dynamic Computations”2014 / Victor P. Zhukov
-
The analysis and measurement of motion errors of the linear slide in fast tool servo diamond turning machine2015 / X. Zhang, X. Zhou, Q. Liu, P. Xu
-
Analysis on the influence of Turbulence model changes to aerodynamic performance of vertical axis wind turbine
Abstract A two dimensional model of vertical axis wind turbine was established in this paper, then software FLUENT and algorithm SIMPLEC were used, combined with the sliding grid technology, the two dimensional unsteady flow field of the vertical...
2012 / Ji Yao, Jianliang Wang, Weibin Yuan, Huimin Wang, Liang Cao -
Head Pose Estimation Based on Head Tracking and the Kalman Filter
Abstract In this paper, we propose a head pose estimation method which combines a texture-based head tracking method and the Kalman filter. The texture-based tracking method first estimates the head pose in the current frame by recovering the...
2011 / Wang Yu, Liu Gang -
Utilization of Forming Tool with Variable Blankholder Force for Drawing of Al Alloys
Abstract Drawing of stampings technology is nowadays the most using technology for sheets processing. Because of stamping's weight reduction is these days actual sheet processing from aluminium alloys which by their properties differ a lot from...
2011 / P. Solfronk, J. Sobotka -
Visual communication: design studio education through working the process
Abstract Visual communication designers must possess the intellectual tools to perform creatively and effectively in addressing the complex visual construct and new media. This paper discusses the process of a study with university freshman...
2011 / Fatos Adiloglu -
Traffic Flow Density Distribution Based on FEM
Abstract In analysis of normal traffic flow, it usually uses the static or dynamic model to numerical analyze based on fluid mechanics. However, in such handling process, the problem of massive modeling and data handling exist, and the accuracy is...
2012 / Jing Ma, Jianming Cui -
Optimization of the Number of Multiple Pumps Running Simultaneously in Open Cycle Cooling Water System in Power Plant
Abstract At present, in a considerable number of enterprises and the second and third class cities which adopt small and medium-sized heat-supply unit of extraction and condensing consisting of a power station for heat needs are still quite a few....
2012 / Hu Sike, Jia Xuejing, Gao Huifen -
Optical Diagnostics of Deposition of Metal Matrix Composites by Laser Cladding
Abstract A multi-wavelengths pyrometer and an infrared camera are applied with Trumpf DMD 505 industrial-scale laser cladding machine for optical diagnostics. Brightness temperature of the molten pool is measured with the variation of the main laser ...
2011 / M. Pavlov, D. Novichenko, M. Doubenskaia -
Kinematics analysis and simulation of profiling memory cutting for tunnel robot in complex environment
Abstract Considering the actual conditions of the roadway drivage for the tunnel robotic, the law of cutting enveloping surface motion in space does not change along with selection of coordinates, roadheader link coordinates and its work coordinates ...
2009 / Mao Jun, Li Jian-gang⁎, Li Wei-kang, Hao Zhi-yong -
A Numerical Analysis of the Grooved Surface Effects on the Thermal Behavior of a Non-Contacting Face Seal
Abstract The paper analyzes heat transfer in a non-contacting face seal with micro-grooves on the end face of the sealing ring. The thermohydrodynamic model of the face seal comprises the equation of the pressure distribution and the energy equation ...
2012 / Sławomir Błasiak, Czesław Kundera -
Ideal Material Models for Engineering Calculations
Abstract The two main objectives of this study were: 1) to analyze the effect of the coefficient of damping of the seal material on its operation parameters (simulation) and 2) to describe the selected engineering material (polyurethane) by means of ...
2012 / Jerzy Bochnia -
Modeling and Experimental Investigation of Edge Hone and Flank Contact Effects in Metal Cutting
Abstract In this study, a process model for orthogonal cutting is developed in order to determine the effect of the hone radius and flank contact on cutting forces. A thermo-mechanical model at primary shear zone with sticking and sliding contact...
2013 / Ceren Çelebi, E. Özlü, Erhan Budak -
Optimal Parking Pricing in General Networks with Provision of Occupancy Information
Abstract This paper investigates the relations between dynamic parking prices and provision of parking information in a general parking network. Travelers are provided with the real-time occupancy and pricing information to make their parking...
2013 / Zhen (Sean) Qian, Ram Rajagopal -
IP Start-up Control for 300MW Turbine Unit with Bypass System
Abstract Based on the analysis of characters of 300MW unit IP start-up, an approach with bypass system about turbine control has been explored in this paper. Control model for IP start-up is given. The pre-warm control of IP start-up and the...
2011 / Weibing Wang, Xudong Wang, Dongju Liu