Mechanical engineering topic list of research papers
-
Influence of Material Microstructures in Micromilling of Ti6Al4V Alloy2013 / Aldo Attanasio, Marcello Gelfi, Annalisa Pola, Elisabetta Ceretti, Claudio Giardini
-
Active Thermometry Based DS18B20 Temperature Sensor Network for Offshore Pipeline Scour Monitoring Using K -Means Clustering Algorithm2013 / Xuefeng Zhao, Weijie Li, Lei Zhou, Gang-Bing Song, Qin Ba, et al.
-
Effective reduction of in-cylinder peak pressures in Homogeneous Charge Compression Ignition Engine – A computational study
Abstract HCCI mode of combustion is known for simultaneous reduction of NOx and PM emissions besides yielding low specific fuel consumption. The nature of volumetric combustion of HCCI engine leads to the development of high peak pressures inside...
2015 / T. Karthikeya Sharma, G. Amba Prasad Rao, K. Madhu Murthy -
Hardware-in-the-Loop Machine Simulation for Modular Machine Tools
Abstract One of the most recognized trends in production today is the increasing demand of complex and personalized products. This leads to an increasing demand for machine tools. As a consequence machine tools are required to be adaptable and...
2015 / Marco Witt, Philipp Klimant -
Heat conduction and Thermal Stress Analysis of laminated composites by a variable kinematic MITC9 shell element2015 / M. Cinefra, S. Valvano, E. Carrera
-
Application of Nontraditional Optimization Techniques for Airfoil Shape Optimization2012 / R. Mukesh, K. Lingadurai, U. Selvakumar
-
Analysis of vehicle headway distribution on multi-lane freeway considering car-truck interaction2016 / D. Kong, X. Guo
-
Calculation of Wall Temperature for Aircraft Exhaust System with Considering Gas Radiation Heat Transfer
Abstract The coupled numerical simulation of flow field, solid temperature field, species concentration field and gas radiation transfer/ energy field based on statistical narrow-band correlated-k (SNBCK) model, is employed to accurately predict...
2009 / Hu Haiyang, Wang Qiang -
Service Innovation and Smart Analytics for Industry 4.0 and Big Data Environment
Abstract Today, in an Industry 4.0 factory, machines are connected as a collaborative community. Such evolution requires the utilization of advance- prediction tools, so that data can be systematically processed into information to explain...
2014 / Jay Lee, Hung-An Kao, Shanhu Yang -
Experimental Analysis of the Auxiliaries Consumption in the Energy Balance of a Pre-series Plug-in Hybrid-electric Vehicle
Abstract The purpose of this study is to evaluate on a real urban driving cycle the performance of a plug-in hybrid-electric vehicle, which is part of a series of pre-marketing vehicles, taking into account the real driving conditions. For this...
2014 / Santiangeli Adriano, Fiori Chiara, Zuccari Fabrizio, Dell’Era Alessandro, Orecchini Fabio, et al. -
Time Domain Prediction of Side and Plunge Milling Stability Considering Edge Radius Effect
Abstract This article introduces a time domain model of side and plunge milling stability by considering cutting edge radius as well as dynamic motion of cutter center. Dynamic uncut chip thickness generated by side, plunge and ultrasonic milling...
2014 / Jeong Hoon Ko -
Comparison of the Embodied Energy of a Grinding Wheel and an End Mill
Abstract In this paper, measurement results of the embodied energy of a corundum grinding wheel and a coated cemented carbide end mill are presented. Both tools are industrial standard regarding geometry and composition. The single process steps and ...
2014 / B. Kirsch, C. Effgen, M. Büchel, J.C. Aurich -
Comparison of Injection Molding Technologies for the Production of Micro-optical Devices
Abstract Injection molding is a complex process regulated by many factors (injection speed, injection pressure, melt temperature, mold temperature, and others). Despite, process control and parameter optimization, it is often difficult to replicate...
2014 / Marco Sortino, Giovanni Totis, Elso Kuljanic -
An Analysis of Driver's Choice based on Information of Traffic Accidents
Abstract To enhance the effectiveness of dynamic information systems and ensure its applicability as a new means to control the influence of non-recurrent events including traffic accident, it is necessary to investigate the software aspects of the...
2013 / Guang Chen, Hongmei Jia, Zheng Li, ManZhen Duan, Xueyu Mi -
Numerical Analysis and Experimental Validation of a Submerged Inlet on the Plane Surface
Abstract In order to get a deep insight of a submerged inlet on the plane surface, the integrated flow-field of the inlet and fuselage has been numerically studied. The investigation is mainly focused on the formation of the total pressure...
2011 / Shu SUN, Rong-wei GUO -
Modeling of Carrier-based Aircraft Ski Jump Take-off Based on Tensor
Abstract A general mathematical model of carrier based aircraft ski jump take-off is derived based on tensor. The carrier, the aircraft body and the movable parts of the landing gears are treated as independent entities. These entities are assembled ...
2011 / Wei-wei LIU, Xiang-ju QU -
Improvement of Aircraft Rolling Power by Use of Piezoelectric Actuators
Abstract Piezoelectric actuators are distributed on both side of a rectangular wing model, and the possibility of improvement of aircraft rolling power is investigated. The difference between the model with aileron deflection and the model without...
2011 / Min LI, Wei-min CHEN, De GUAN -
Establishment of a Model for a Combined Heat and Power Plant with ThermosysPro Library
Abstract The Simulation and Information Technologies for Power Generation System Department (STEP) has developed a methodology, as part of the framework of an EDF R&D project, to model and optimize energy systems for the associated companies...
2013 / O. Deneux, B. El Hafni, B. Péchiné, E. Di Penta, G. Antonucci, et al. -
Sensor selection of helicopter transmission systems based on physical model and sensitivity analysis
Abstract In the helicopter transmission systems, it is important to monitor and track the tooth damage evolution using lots of sensors and detection methods. This paper develops a novel approach for sensor selection based on physical model and...
2014 / Kehong Lyu, Xiaodong Tan, Guanjun Liu, Chenxu Zhao -
Reentry trajectory optimization for hypersonic vehicle satisfying complex constraints
Abstract The reentry trajectory optimization for hypersonic vehicle (HV) is a current problem of great interest. Some complex constraints, such as waypoints for reconnaissance and no-fly zones for threat avoidance, are inevitably involved in a...
2013 / Jiang Zhao, Rui Zhou