Mechanical engineering topic list of research papers
-
A Case Study on Engineering Failure Analysis of Link Chain
Objectives: The objective of this study was to investigate the effect of chain installation condition on stress distribution that could eventually cause disastrous failure from sudden deformation and geometric rupture. ...
2011 / Tae-Gu Kim, Seong-Beom Lee, Hong-Chul Lee -
Finite Element Model to Calculate the Thermal Expansions of the Tool and the Workpiece in Dry Turning
Abstract Dry cutting is an important issue with regard to the economy and ecology of machining. The absence of the cutting fluid reduces both the costs for machining and the risk of ecological hazards. However, the missing convection through the...
2014 / S. Schindler, M. Zimmermann, J.C. Aurich, P. Steinmann -
Mining Informative Hydrologic Data by Using Support Vector Machines and Elucidating Mined Data according to Information Entropy2015 / Shien-Tsung Chen
-
The horizontal stability of an FLNG with different turret locations2015 / Zhi-Tian Xie, Jian-Min Yang, Zhi-Qiang Hu, Wen-Hua Zhao, Jing-Rui Zhao
-
Study on the Optimal Charging Strategy for Lithium-Ion Batteries Used in Electric Vehicles2014 / Shuo Zhang, Chengning Zhang, Rui Xiong, Wei Zhou
-
Maximum Stress Estimation Model for Multi-Span Waler Beams with Deflections at the Supports Using Average Strains2015 / Sung Park, Byung Oh, Hyo Park
-
Experimental and Numerical Study of the Aerodynamic Characteristics of an Archimedes Spiral Wind Turbine Blade2014 / Kyung Kim, Ho Ji, Yoon Kim, Qian Lu, Joon Baek, et al.
-
Integrated Cantilever-Based Flow Sensors with Tunable Sensitivity for In-Line Monitoring of Flow Fluctuations in Microfluidic Systems2013 / Nadine Noeth, Stephan Keller, Anja Boisen
-
On condition based maintenance policy
Abstract In the case of a high-valuable asset, the Operation and Maintenance (O&M) phase requires heavy charges and more efforts than the installation (construction) phase, because it has long usage life and any accident of an asset during this...
2015 / Jong-Ho Shin, Hong-Bae Jun -
Engine Performance, Emission and Combustion Characteristics of a Common-rail Diesel Engine Fuelled with Bioethanol as a Fuel Additive in Coconut Oil Biodiesel Blends
Abstract In the present work, an experimental investigation was conducted to investigate the effect of using bioethanol as additive to biodiesel-diesel blends on the engine performance, emissions and combustion characteristics of a four-cylinder,...
2015 / H.G. How, H.H. Masjuki, M.A. Kalam, Y.H. Teoh -
Aerodynamic Design and Numerical Simulation of Over-under Turbine-based Combined-cycle (TBCC) Inlet Mode Transition
Abstract A parameterized design method is established for mode transition of over-under TBCC inlet and the design variables are optimized by Multi-Island Gene Algorithm using auto-CFD solution. Dynamic overset grid technology is utilized tocontrol...
2015 / Xiang Xianhong, Liu Yuan, Qian Zhansen -
Design for aircraft engine multi-objective controllers with switching characteristics
Abstract The aircraft engine multi-loop control system is described and the switching control theory is introduced to solve the regulating and protecting control problems in this paper. The aircraft engine multi-loop control system is firstly...
2014 / Xiaofeng Liu, Jing Shi, Yiwen Qi, Ye Yuan -
Modelling and analysis of heat transfer through 1D complex granular system2014 / E. Szymanek, T. Blaszczyk, M. R. Hall, P. Keikhaei Dehdezi, J. S. Leszczynski
-
Road Assessment Model and Pilot Application in China2014 / Tiejun Zhang, Chengcheng Tang, Greg Smith, Lingtao Wu
-
Evaluation of Contact Heat Transfer Coefficient and Phase Transformation during Hot Stamping of a Hat-Type Part2015 / Heung-Kyu Kim, Seong Lee, Hyunjoo Choi
-
Design and Mechanical Evaluation of a Capacitive Sensor-Based Indexed Platform for Verification of Portable Coordinate Measuring Instruments2014 / Agustín Avila, Jorge Mazo, Juan Martín
-
Optimization of Tribological Properties of Nonasbestos Brake Pad Material by Using Steel Wool2013 / R. Vijay, M. Jees Janesh, M. A. Saibalaji, V. Thiyagarajan
-
Optimizing Route for Hazardous Materials Logistics Based on Hybrid Ant Colony Algorithm2013 / Haixing Wang, Guiping Xiao, Zhen Wei
-
Performance Tuning of Coordinated Active Traffic Control Algorithm: Simultaneously Improving Corridor Safety and Mobility Performances2014 / Jie Fang
-
Fuzzy PID Feedback Control of Piezoelectric Actuator with Feedforward Compensation2014 / Ziqiang Chi, Minping Jia, Qingsong Xu