Materials engineering topic list of research papers
-
Study on Partial Replacement of Silica Fume Based Geopolymer Concrete Beam Behavior under Torsion
Abstract The utilization of Ordinary Portland Cement (OPC) cause hazard due to emission of CO2. To avoid this, Pozzolanic material is used as a substituted for OPC. These are activated by alkaline to form a gel known as aluminosilicate which acts as ...
2017 / A. Joshua Daniel, S. Sivakamasundari, A. Nishanth -
Low-pressure silica injection for porosity reduction in cementitious materials
Abstract The durability of building materials is related to the presence of cracks as they provide a fast pathway for the transport of liquid and gases through the structure. Restoration and preservation of historic buildings are the potential...
2017 / Riccardo Maddalena, Andrea Hamilton -
TiNi-based films for elastocaloric microcooling— Fatigue life and device performance2016 / H. Ossmer, C. Chluba, S. Kauffmann-Weiss, E. Quandt, M. Kohl
-
Optimum Design for Graded Honeycomb as Energy Absorber Device in Elevator Cabin
Abstract In this study graded honeycomb structure has been introduced as energy dissipation device. This type of energy absorbers can reduce casualty in case of an accident for moving vehicles. In this study energy absorbers design for elevator...
2017 / Mojtaba Ahsanfar, Seyed Ali Galehdari -
Modelling and optimization of Nd:YAG laser micro-turning process during machining of aluminum oxide (Al2O3) ceramics using response surface methodology and artificial neural network2014 / Golam Kibria, Biswanath Doloi, Bijoy Bhattacharyya
-
Research on Development Strategy of Automobile Reverse Logistics Based on SWOT Analysis
Abstract This paper first analyzes the research significance and purpose of the paper, then uses the SWOT analysis method to list the SO strategy, the ST strategy, the WO strategy, the WT strategy, and the SO strategy of the corresponding SWOT in...
2017 / Lian Zhikang -
Comparative Study of Smart Base-Isolation Using Fuzzy Control and Neural Network
Abstract The paper presents seismic response of a five story building equipped with smart base-isolation system using Lead rubber bearing (N-Z) and MR-damper placed in between foundation and base of the building. Five types of building viz. fixed...
2017 / Megha T. Lakhani, Devesh P. Soni -
Composites of aluminum alloy and magnesium alloy with graphite showing low thermal expansion and high specific thermal conductivity2017 / Valerio Oddone, Benji Boerner, Stephanie Reich
-
Experimental Analysis of Anchor Bolt in Concrete under the Pull-Out Loading
Abstract The design of pull-out strength of anchor bolt in concrete is generally based on standards which are assumed to have a single crack failure and the uniform stress. However, in real phenomenon these assumptions are not reliable and a...
2017 / Hariyadi, Satoru Munemoto, Yoshimi Sonoda -
Influence of Geometry and Hardness of the Backing Plate on Ballistic Performance of Bi-Layer Ceramic Armor
Abstract The high hardness and strength of technical ceramics is exploited to design ballistic armors and their low toughness, brittleness is overcome by joining them with a metallic or long fiber reinforced composite backing plate. The thickness of ...
2017 / Govind Gour, Ahmad Serjouei, Idapalapati Sridhar -
Three-dimensional mapping of the residual stress field in a locally-rolled aluminium alloy specimen
Abstract Detrimental residual stresses that occur in welded joints can be removed by rolling the weld seam. In this study we show that rolling could be applied to much thicker-section welds than has previously been attempted. A residual stress field ...
2017 / H.E. Coules, G.C.M. Horne, S. Kabra, P. Colegrove, D.J. Smith -
8-band k·p modelling of mid-infrared intersubband absorption in Ge quantum wells2016 / D. J. Paul
-
Acousto-plasmofluidics: Acoustic modulation of surface plasmon resonance in microfluidic systems2015 / Daniel Ahmed, Xiaolei Peng, Adem Ozcelik, Yuebing Zheng, Tony Jun Huang
-
Intelligent Prediction System for Gas Metering System using Particle Swarm Optimization in Training Neural Network
Abstract In this paper, a study on development of prediction model based on an intelligent systems is discussed for gas metering system in order to validate the instrument reliability. In providing reliable measurement of gas metering system, an...
2017 / N.S. Rosli, R. Ibrahim, I. Ismail -
Considerations on material thickness influence on the AWJ processing quality of an aluminium alloy2017 / Eugen Herghelegiu, Maria Crina Radu, Carol Schnakovszky, Catalin Nicolae Tampu
-
Flow and failure of an aluminium alloy from low to high temperature and strain rate2015 / Rafael Sancho, David Cendón, Francisco Gálvez
-
Numerical Evaluation of Dynamic Response of a Steel Structure Model Under Various Seismic Excitations
Abstract The present paper reports the results of the study, which was designed to perform a numerical evaluation of dynamic response of a single-storey steel structure model. The experimental model was previously subjected to a number of different...
2017 / Tomasz Falborski, Robert Jankowski -
Energy Saving Using D-STATCOM Placement in Radial Distribution System under Reconfigured Network
Abstract High R/X ratio and significant voltage drop causes substantial power losses along the distribution network. In this paper optimal location and size for D-STATCOM is determined for radial distribution networks under reconfigured network to...
2016 / Atma Ram Gupta, Ashwani Kumar -
Sintered Structural Steels Containing Mn, Cr And Mo – The Summary of the Investigations2017 / Maciej Sulowski
-
Combined electrical and resonant optical excitation characterization of multi-quantum well InGaN-based light-emitting diodes2016 / S. Presa, P. P. Maaskant, M. J. Kappers, C. J. Humphreys, B. Corbett