Materials engineering topic list of research papers
-
Static and Dynamic Characteristics Modeling for CK61125 CNC Lathe Bed Basing on FEM
Abstract The lathe bed characteristics are directly effect on the machining accuracy. Firstly, based on finite element analysis method, the static and dynamic structural are modeled for CK61125 CNC lathe. The results show that the maximum stress is...
2017 / Hongping Yang, Rongzhen Zhao, Weiqian Li, Cheng Yang, Li Zhen -
A thermally robust and thickness independent ferroelectric phase in laminated hafnium zirconium oxide2016 / S. Riedel, P. Polakowski, J. Müller
-
Monodomain Blue Phase Liquid Crystal Layers for Phase Modulation2017 / E. Oton, E. Netter, T. Nakano, Y. D.-Katayama, F. Inoue
-
Cartilage-like electrostatic stiffening of responsive cryogel scaffolds2017 / G. S. Offeddu, I. Mela, P. Jeggle, R. M. Henderson, S. K. Smoukov, et al.
-
Reliable and cost effective design of intermetallic Ni2Si nanowires and direct characterization of its mechanical properties2015 / Seung Zeon Han, Joonhee Kang, Sung-Dae Kim, Si-Young Choi, Hyung Giun Kim, et al.
-
Corrosion and mechanical properties of AM50 magnesium alloy after modified by different amounts of rare earth element Gadolinium2016 / Miao Yang, Zhiyi Zhang, Yaohui Liu, Xianlong Han
-
Grain boundary and its hydrogenated effect in stanene2016 / Zhili Zhu, Qiang Sun, Yu Jia
-
On the Effect of Defect Thickness of ERW Pipe on the Acceptability for Piling Structure
Abstract A pile is a fundamental part of fixed type platform which commonly used to support superstructure rig in the offshore area. A seamless pipe is usually used as the pile structure. However, this seamless pipe is a high-priced pipe and scarce...
2017 / Muhammad A. Kariem, Hafizhul Aziz, I.W. Puja -
A finite strain elastoplastic constitutive model for unsaturated soils incorporating mechanisms of compaction and hydraulic collapse2016 / Keita Nakamura, Mamoru Kikumoto
-
Surging footprints of mathematical modeling for prediction of transdermal permeability
Abstract In vivo skin permeation studies are considered gold standard but are difficult to perform and evaluate due to ethical issues and complexity of process involved. In recent past, a useful tool has been developed by...
2017 / Neha Goyal, Purva Thatai, Bharti Sapra -
Nanostructure lipid carriers: A modish contrivance to overcome the ultraviolet effects
Abstract Protection of the skin from the ultraviolet radiation is the prime concern of society. An increase in the adverse effects by ultraviolet (UV) radiation on the skin promoted cosmetic formulators to work in the area of UV blockers and their...
2017 / Priyanka Jain, Prerna Rahi, Vikas Pandey, Saket Asati, Vandana Soni -
Effect of Span Length on Behavior of MRF Accompanied with CBF and MBF Systems
Abstract The main objective of this study is to quantify effects of variations of aspect ratio (ratio of span length to story height) and lateral resisting system on response of high-rise steel structures. In the present research two goals of...
2017 / Benyamin Kioumarsi, Ali Kheyroddin, Majid Gholhaki, Mahdi Kioumarsi, Sheida Hooshmandi -
Risk Assessment Strategy for Decommissioning of Fukushima Daiichi Nuclear Power Station
Abstract Risk management of the Fukushima Daiichi Nuclear Power Station decommissioning is a great challenge. In the present study, a risk management framework has been developed for the decommissioning work. It is applied to fuel assembly retrieval ...
2017 / Akira Yamaguchi, Sunghyon Jang, Kazuki Hida, Yasunori Yamanaka, Yoshiyuki Narumiya -
Design and Performance Evaluation of 4 Wheeled Omni Wheelchair with Reduced Slip and Vibration
Abstract Holonomic wheelchairs are being popular for their ability to move in constrained spaces due to their omnidirectional mobility. In this paper we have presented design and development of a 4 wheel driven omni wheelchair suited for indoor...
2017 / Ananda Sankar Kundu, Oishee Mazumder, Prasanna K. Lenka, Subhasis Bhaumik -
Enhancing the blocking temperature of perpendicular-exchange biased Cr2O3 thin films using buffer layers2017 / Naoki Shimomura, Satya Prakash Pati, Tomohiro Nozaki, Tatsuo Shibata, Masashi Sahashi
-
Programmable and coherent crystallization of semiconductors2017 / Liyang Yu, Muhammad R. Niazi, Guy O. Ngongang Ndjawa, Ruipeng Li, Ahmad R. Kirmani, et al.
-
Threshold switching behavior of Ag-Si based selector device and hydrogen doping effect on its characteristics2015 / Jongmyung Yoo, Jiyong Woo, Jeonghwan Song, Hyunsang Hwang
-
An Expert System of Die Design for Multi Stage Deep Drawing Process
Abstract Deep drawing process is mainly used to produce automotive & aerospace components, house hold utensils, casings of electronic devices and many more. It is a plastic deformation process consists of tools viz. punch, die and blank holder....
2017 / Mallika R. Bhatt, Sanjay H. Buch -
Semi-polar (11-22) AlGaN on overgrown GaN on micro-rod templates: Simultaneous management of crystal quality improvement and cracking issue2017 / Z. Li, L. Jiu, Y. Gong, L. Wang, Y. Zhang, et al.
-
On the Confined High-strength Concrete and Need of Future Research
Abstract Investigation about requirements of confining reinforcement on the structure of high-strength concrete has been progressed significantly since the last three decades. Research carried out intensively on high-strength concrete, produces a...
2017 / Antonius, Iswandi Imran, Prabowo Setiyawan