Materials engineering topic list of research papers
-
Behavior of Hollow Composite Steel-concrete Members under Long-term Axial Compression
Abstract Research results related to the behavior of hollow composite steel-concrete members under short-term loading are well known. Such members consist of two materials — steel and concrete with very different properties. They have different...
2017 / Antanas Šapalas, Gintas Šaučiuvėnas, Konstantin Rasiulis -
Quality Evaluation of Parmigiano Reggiano Cheese by a Novel Nanowire Device S3 and Evaluation of the VOCs Profile
Abstract A novel nanowire-based sensor device is presented for the quality evaluation of the Italian Parmigiano Reggiano (PR) cheese. As a Protected Designation of Origin (PDO) trademark product, the cheese should follow stringent manufacturing...
2017 / M.P. Bhandari, E. Núñez Carmona, V. Galstyan, V. Sberveglieri -
Electrical properties and interfacial issues of high-k/Si MIS capacitors characterized by the thickness of Al2O3 interlayer2016 / Xing Wang, Hongxia Liu, Chenxi Fei, Lu Zhao, Shupeng Chen, et al.
-
Effect of Long-Term Service on Microstructure and Mechanical Properties of Martensitic 9% Cr Steel2017 / Grzegorz Golański, Anna Zielińska-Lipiec, Adam Zieliński, Marek Sroka
-
Hydrogenation of iron in the early stage of Earth’s evolution2017 / Riko Iizuka-Oku, Takehiko Yagi, Hirotada Gotou, Takuo Okuchi, Takanori Hattori, et al.
-
Dynamic Behaviour of Foams and Sandwich Panels under Shock Wave Loading
Abstract Sandwich panels with cellular cores are being widely used as blast mitigation materials, due to their light weight and good energy absorption properties. In the present study, the behaviour of sandwich panels against different shock...
2017 / C. Jayarami Reddy, V. Madhu -
Green micro-resistojet research at Delft University of Technology: new options for Cubesat propulsion2016 / A. Cervone, B. Zandbergen, D. C. Guerrieri, M. De Athayde Costa e Silva, I. Krusharev, et al.
-
A Review of Analytical Micromechanics Models on Composite Elastoplastic Behaviour
Abstract Elasto-plastic behavior of composite structures is a key problem in light-weight application, which has been investigated vastly for decades. Most approaches for composites elasto-plastic simulation can be split into three categories: 1)...
2017 / Yanchao Wang, Zhengming Huang -
Research on the Optimization Design of Motorcycle Engine Based on DOE Methodology
Abstract The optimization design of engine is always one of the top concerns in motorcycle industry. In this paper, effective torque and fuel consumption ratio are defined as the performance evaluation indexes of engine, while air-fuel ratio, intake ...
2017 / Li Yongfan, Zhang Shuai, Wang Jing -
Epitaxial NbN/AlN/NbN tunnel junctions on Si substrates with TiN buffer layers2016 / Rui Sun, Kazumasa Makise, Lu Zhang, Hirotaka Terai, Zhen Wang
-
Thermal and mechanical stability of retained austenite surrounded by martensite with different degrees of tempering
Abstract The mechanical and thermal stability of austenite in multiphase advanced high strength steels are influenced by the surrounding microstructure. The mechanisms underlying and the relations between thermal and mechanical stability are still...
2017 / J. Hidalgo, K.O. Findley, M.J. Santofimia -
Influence of the temperature on the tension behaviour of EUROFER97 alloy at high strain rate2015 / Ezio Cadoni, Matteo Dotta, Daniele Forni, Philippe Spätig
-
Agent Based Simulation Optimization of Waste Electrical and Electronics Equipment Recovery2016 / Ardeshir Raihanian Mashhadi, Sara Behdad, Jun Zhuang
-
The Service-oriented Manufacturing Mode based on 3D printing: A Case of Personalized Toy
Abstract 3D printing is a technology of rapid prototyping. It can effectively respond to the needs of customers and help to achieve the Service-oriented manufacturing. Here the reconstruction of personalized toy manufacturing through 3D printing was ...
2017 / Zhen Chen -
Remote handling of DEMO breeder blanket segments: Blanket transporter conceptual studies
Abstract As part of the EUROfusion DEMO programme, RACE has been developing a set of concept designs for remote maintenance systems. The tritium breeding blankets will require periodic replacement via the upper vertical ports at the top of the...
2017 / Jonathan Keep, Steve Wood, Neelam Gupta, Matti Coleman, Antony Loving -
U-Model Based Adaptive Control of Gas Process Plant
Abstract Industrial process control holds great importance while dealing with nonlinear control. System modeling and controller design is considered to be a critical challenge for researchers as well as plant operators. Resultantly, significant...
2017 / E. Hasan, Rosdiazli Bin Ibrahim, Syed Saad Azhar Ali, Kishore Bingi, Syed Faizan Gilani -
Lightweight Heat Resistant Geopolymer-based Materials Synthesized from Red Mud and Rice Husk Ash Using Sodium Silicate Solution as Alkaline Activator2017 / Nguyen Hoc Thang, Pham Trung Kien, Mohd Mustafa Al Bakri Abdullah
-
Formation and evolution of a pair of collisionless shocks in counter-streaming flows2017 / Dawei Yuan, Yutong Li, Meng Liu, Jiayong Zhong, Baojun Zhu, et al.
-
Applying Triz for Production Quality Improvement2017 / Nikalus Shu Luing Swee, Guat Guan Toh, Mum Wai Yip, Chee Sheng Keong, See Chew Tai
-
Lip Formation and Ejecta from LPSO-type Magnesium Alloy Plates in Hypervelocity Impact
Abstract Long period stacking ordered (LPSO) type magnesium alloys have the low density, excellent mechanical strength and ignition resistance. LPSO-type magnesium alloys have a great potential as structural materials of satellites. Lip formation...
2017 / Masahiro Nishida, Kaito Ishida, Fumiya Kodama, Koichi Hayashi, Yasuhiro Akahoshi, et al.