Materials engineering topic list of research papers
-
A Flexible Multifunctional Tactile Sensor Using Interlocked ZnO Nanorod Arrays for Artificial Electronic Skin
Abstract This study presents a novel multifunctional tactile sensor to mimetic the human skin with high sensitive, flexible, and temperature measurable performances. The substrate is flexible due to the material property of the Polydimethylsiloxane...
2017 / Min-Sheng Suen, Yi-Cheng Lin, Rongshun Chen -
Bearing Signal Separation of Commercial Helicopter Main Gearbox
Abstract Gears are significant component in a multiplicity of industrial applications such as machine tool and gearboxes. An unforeseen failure of gear may result in significant economic losses. Therefore this research propose fault detection...
2017 / Faris Elasha, Matthew Greaves, David Mba -
Study on Preparation and Physical Mechanical Properties of Si3N4Composite Ceramics2015 / Wei Chen, Zhenglin Lv, Dongqiang Gao, Xu Ai
-
The Influence of Natural and Nano-additives on Early Strength of Cement Mortars
Abstract The study attempts to evaluate the impact of six different additives, including natural additives and nano-additives, on the early - one day strength of cement mortars. Furthermore the use of heating process to increase the strength...
2017 / Piotr Brzozowski, Elzbieta Horszczaruk, Khrystyna Hrabiuk -
Tensile Fracture and Compression failure Behavior of Cenosphere Reinforced AA6061 Metal Matrix Composite
Abstract A small percentage of particles, present in the pulverized lignite coal fly-ash, contain thin-walled hollow spheres or cenosphere. Their amount depends on the carbon and iron contents existing in the fly-ash. The apparent density of these...
2017 / R. Ilandjezian, S. Gopalakannan -
Unified model for the electromechanical coupling factor of orthorhombic piezoelectric rectangular bar with arbitrary aspect ratio2017 / R. Rouffaud, F. Levassort, A.-C. Hladky-Hennion
-
An Experimental Investigation on Physical and Mechanical Properties of Concrete with the Replacement of Fine Aggregate by Poly Vinyl Chloride and Glass Waste
Abstract The present work aims to study the possibility of replacing fine aggregate with a mixture of Poly Vinyl Carbonate (PVC) Powder and Glass Powder in manufacturing cement concrete. For this, experiments were carried out to measure and study...
2017 / Harshad G. Patel, Sejal P. Dalal -
High Resolution Nano-gap Pirani Sensor for Pressure Measurement in Wide Dynamic Range Operation Around Atmospheric Pressure
Abstract We present an innovative and practical pressure sensor based on Pirani effect enabling high sensitivity, high resolution, and high dynamic range around atmospheric pressure. The structure is composed of 3μm width and 1mm long metallic...
2017 / Julien Claudel, Cecile Ghouila-Houri, Jean-Claude Gerbedoen, Quentin Gallas, Eric Garnier, et al. -
Nucleation of recrystallisation in castings of single crystal Ni-based superalloys
Abstract Recrystallisation in single crystal Ni-based superalloys during solution heat treatment results in a significant cost to the investment casting industry. In this paper two sources of surface nucleation have been identified in the alloy...
2017 / Harshal N. Mathur, Chinnapat Panwisawas, C. Neil Jones, Roger C. Reed, Catherine M.F. Rae -
A nanowire based triboelectric nanogenerator for harvesting water wave energy and its applications2017 / Xiaoyi Li, Juan Tao, Jing Zhu, Caofeng Pan
-
Behaviour and modelling of aluminium alloy AA6060 subjected to a wide range of strain rates and temperatures2015 / Vincent Vilamosa, Tore Børvik, Odd Sture Hopperstad, Arild Holm Clausen
-
A novel approach of high speed scratching on silicon wafers at nanoscale depths of cut2015 / Zhenyu Zhang, Dongming Guo, Bo Wang, Renke Kang, Bi Zhang
-
Application of sustained release microsphere in hypoparathyroidism after thyroid surgery2017 / Ming Pan, Hong Zhang, Yueshu Wang
-
Fabrication and Hardness Analysis of F-MWCNTs Reinforced Aluminium Nanocomposite
Abstract Powder metallurgy processing is an adaptable method commonly used to fabricate Multi Walled Carbon Nanotubes Aluminum (MWCNTs/Al) nanocomposites because it is a simple method of composite preparation. In this research paper Functionalized...
2017 / Md Zakir Hussain, Urfi Khan, A.K. Chanda, Rituraj Jangid -
Effect of Specimen Thickness on High Strain Rate Properties of Kevlar/Polypropylene Composite
Abstract Characterization of Kevlar-Polypropylene based composite material system under high strain rate loading has been investigated using Split Hopkinson Pressure Bar (SHPB) test for varying specimen aspect ratios. Flat laminates of 16, 24 and 30 ...
2017 / Hemant Chouhan, Neelanchali Asija, Shishay Amare Gebremeskel, Naresh Bhatnagar -
A Combination of Terrain Prediction and Correction for Search and Rescue Robot Autonomous Navigation2012 / Yan Guo, Aiguo Song, Jiatong Bao, Tang Hongru, Jianwei Cui
-
Splash, pop, sizzle: Information processing with phononic computing2015 / Sophia R. Sklan
-
Geochemical Characteristics of Gases from Typical High-temperature Geothermal Systems in China
Abstract Gaseous components are very effective indicators of deep processes in high-temperature geothermal systems. We have chosen the Kangding, Rehai, Tatun, and Yangbajing geothermal systems, from the Chinese segments of the...
2017 / Jiao Tian, Zhonghe Pang -
Mesoscopic analysis of Crack Propagation in Concrete by Nonlinear Finite Element Method with Crack Queuing Algorithm
Abstract By means of nonlinear finite element method, the initiation and propagation of cracks in concrete are analysed numerically at the mesoscopic level. The concrete is treated and modelled as a three-phase system consisting of coarse aggregate, ...
2017 / A.K.H. Kwan, P.L. Ng, Z.M. Wang -
Iron and Bronze Powdered Based Materials for Bearings with Surface Modified with Solid Lubricant Nanoparticles2014 / M. Lijewski, V. Leshynsky, H. Wisniewska-Weinert, J. Sulej-Chojnacka, T. Rybak