Materials engineering topic list of research papers
-
Minimizing Drilling Thrust Force for HFRP Composite by Optimizing Process Parameters using Combination of ANOVA Approach and S/N Ratios Analysis2014 / Mohd Azuwan Maoinser, Faiz Ahmad, Safian Sharif, Woo Tze Keong
-
The microscopic origin of the extreme glass-forming ability of Albite and B2O32017 / Edgar D. Zanotto, Daniel R. Cassar
-
Effect of MnO2 doped on physical, structure and optical properties of zinc silicate glasses from waste rice husk ash
Abstract In this study, an investigation was conducted to explore and synthesize silicate (SiO2) glass from waste rice husk ash (RHA). MnO2 doped zinc silicate glasses with chemical formula [(ZnO)55 +(WRHA)45]100-X[MnO2]X,...
2017 / Ali Jabbar Abed Al-Nidawi, Khamirul Amin Matori, Azmi Zakaria, Mohd Hafiz Mohd Zaid -
Comparative Study of Impact Strength Characteristics of Treated and Untreated Sisal Polyester Composites
Abstract In the present study both treated and untreated sisal polyester composites are tested to study its impact strength characteristics. ASTM D256 norms are followed to conduct the impact test on the specimens of 2 mm, 3 mm, 4 mm, 5 mm and 6 mm...
2017 / G.L. Easwara Prasad, B.S. Keerthi Gowda, R. Velmurugan -
Micro-Bulges Investigation on Laser Modified Tool Steel Surface2017 / Fazliana Fauzun, Syarifah Nur Aqida, Izwan Ismail, Norhafzan Bariman
-
Strength Prediction of Adhesively Bonded Joints using Plastic Zone Size Criterion
Abstract The prediction of the strength of adhesively bonded joints has been an issue of considerable interest in literature. This exercise requires numerical techniques combined with experimental programs and matching the two to arrive at a viable...
2017 / P.K. Sahoo, B. Dattaguru, C.M. Manjunatha -
Nano- and Microparticles in Welding Aerosol: Electronic and Microscopic Analysis
Abstract The paper presents the first results of the research of the morphological and material composition of the particles in welding aerosol. It is shown that in terms of morphology the particles are hollow and solid balls, sometimes covered with ...
2017 / K.Yu. Kirichenko, V.A. Drozd, V.V. Chaika, A.V. Gridasov, A.S. Kholodov, et al. -
A molecular dynamics study of melting and dissociation of tungsten nanoparticles2015 / Min Li, Jun Wang, Baoqin Fu, Qing Hou
-
Characterization of the interfacial heat transfer coefficient for hot stamping processes2016 / Xi Luan, Xiaochuan Liu, Haomiao Fang, Kang Ji, Omer El Fakir, et al.
-
The Study Of The Impact Of Surface Preparation Methods Of Inconel 625 And 718 Nickel-Base Alloys On Wettability By BNi-2 And BNi-3 Brazing Filler Metals2015 / K. Lankiewicz, M. Baranowski, T. Babul, S. Kowalski
-
Functional materials for energy-efficient buildings2015 / H.-P Ebert
-
Review on Characterization and Mechanical Performance of Self-cleaning Concrete2017 / Siti Norsaffirah Zailan, Norsuria Mahmed, Mohd Mustafa Al Bakri Abdullah, Andrei Victor Sandu, Noor Fifinatasha Shahedan
-
On Rayleigh Waves in Self-reinforced Layer Embedded over an Incompressible Half-space with Varying Rigidity and Density
Abstract In this paper a mathematical model to study the Rayleigh wave propagation in a self-reinforced layer over an incompressible inhomogeneous elastic half-space with quadratically varying rigidity and linearly varying density has been...
2017 / Shishir Gupta, Mostaid Ahmed -
Staged Analysis of RC Frame Retrofitted with Steel Braces in Low and Medium-rise Buildings
Abstract The emerging concept of sustainable construction has lead researchers and practicing engineers to preserve and strengthen existing structures to minimized use of materials and energy associated with it. As a result, many retrofitting...
2017 / Made Sukrawa -
Assessment of Explosion Risks in the Presence of Hydrocarbon Mixtures
Abstract The most of gas associated industries face with the risks of explosion and fire which may lead to dire consequences. We present an approach for assessing the explosion risks in the presence of hydrocarbon mixtures when the chemical...
2017 / Alexander M. Baranov, Andrey Somov, Alexey Karelin, Evgeny E. Karpov, Sergey Mironov, et al. -
Study of Loading in Point-involute Gears
Abstract The main limiting factor in high-speed aviation gear systems is contact strength. There are two main ways for reducing contact stresses in gears with involute tooth profile: 1) by using a standard basic rack profile with increased pressure...
2017 / Aleksey Suslin, Clovis Pilla -
Numerical study of heat transfer from a wall incorporating a phase change material2013 / L. Derradji, A. Hamid, B. Zeghmati, M. Amara, A. Bouttout, et al.
-
Formation of very large ‘blocky alpha’ grains in Zircaloy-4
Abstract Understanding microstructure and its evolution is very important in safety critical components such as cladding in nuclear reactors. Zirconium alloys are used as cladding materials due to their low neutron capture cross section, good...
2017 / Vivian Tong, Ben Britton -
Modelling of the dynamic behaviour of hard-to-machine alloys2012 / M. Hokka, T. Leemet, A. Shrot, M. Bäker, V.-T. Kuokkala
-
Modulation of hole-injection in GaInN-light emitting triodes and its effect on carrier recombination behavior2015 / Sunyong Hwang, Dong Yeong Kim, Jun Hyuk Park, Han-Youl Ryu, Jong Kyu Kim