Materials engineering topic list of research papers
-
Small Punch and Indentation Tests for Structural Health Monitoring
Abstract The microstructural and metallurgical changes due to high temperature and high pressure applications, irradiations etc. cause a significant degradation of the mechanical properties of materials in refinery industries, nuclear industries,...
2017 / Asif Husain, Ravi Sharma, D.K. Sehgal -
Strengthening of RC Beams Using Lightweight Self-compacting Cementitious Composite
Abstract Repair and strengthening of reinforced concrete (RC) members in existing structures are very important to extend their service life. In this study, steel fiber reinforced high strength lightweight self-compacting concrete (SHLSCC) developed ...
2017 / Klaus Holschemacher, Shahid Iqbal, Ahsan Ali, Thomas A. Bier -
Highly sensitive H2S sensors based on Cu2O/Co3O4 nano/microstructure heteroarrays at and below room temperature2017 / Guangliang Cui, Pinhua Zhang, Li Chen, Xiaoli Wang, Jianfu Li, et al.
-
Elastic-plastic Behavior of an Ellipsoidal Inclusion Embedded in an Elastic Matrix
Abstract In this paper, the stress-strain behavior of an elastic-plastic ellipsoidal inclusion embedded in an infinite elastic matrix is studied. The parent elastic material is considered to be subjected to monotonically increasing far-field...
2017 / Prasun Jana -
Multiobjective Optimization of Functionally Corrugated Tubes for Improved Crashworthiness under Axial Impact
Abstract This study aims to analyze the effectiveness of introducing sinusoidal corrugations with varying wavelength and amplitude along the length of cylindrical tubes in order to improve their energy absorption characteristics. Different...
2017 / Sharad Rawat, Anirudh Narayanan, A.K. Upadhyay, K.K. Shukla -
Energy Absorption Characteristics of Carbon /Epoxy Nano Filler Dispersed Composites Subjected to Localized Impact Loading
Abstract Energy absorbing capacity of carbon/epoxy nanocomposite laminates subjected to impact loading is studied in this paper. Nano fillers of 1% to 5% are dispersed in the epoxy matrix. The laminates with and without nano filler are prepared by...
2017 / M. Pushparaja, G. Balaganesan, R. Velmurugan, N.K. Gupta -
Study on Quality Improvement of Machine Tools
Abstract Quality management of machine tools is the key to reducing downtime of customers’ machines and the manufacturers’ service cost. This paper introduces DMG MORI's systematic workflow from designing, procurement, manufacturing, and acceptance...
2017 / Makoto Fujishima, Masahiko Mori, Kimiyuki Nishimura, Katsuhiko Ohno -
Computation of Stresses in Concrete Gravity Dam Under Seismic Loading Through ANN and FEM
Abstract In this study, an Artificial Neural Networks (ANN) model is designed and verified for quick estimation of the structural parameter (maximum principle stresses at toe and heel) developed on a concrete gravity dam under earthquake loading....
2017 / Mohd. Saqib, Md. Imteyaz Ansari -
Tool Wear Assessment During Machining of Inconel 718
Abstract Machining of superalloy Inconel 718 would have established some issues like, inability of the tool materials to sustain for a longer duration due to the work hardening effect and very high cutting forces causes metallurgical damage on the...
2017 / M. Anthony Xavior, M. Manohar, P. Jeyapandiarajan, Patil Mahesh Madhukar -
Magnetic-control-electric and reversal behavior of ZnO/NiFe/ZnO multilayer films2017 / Po-Wei Chi, Da-Hua Wei, Chin-Chung Yu, Yeong-Der Yao
-
Relaxation damping in oscillating contacts2015 / M. Popov, V.L. Popov, R. Pohrt
-
Nuclear analysis of the HCLL blanket for the European DEMO
Abstract This paper presents the nuclear analysis of the European DEMO baseline 2015 with HCLL blanket carried out with the TRIPOLI-4® Monte Carlo code and the JEFF-3.2 nuclear data library. The TRIPOLI-4® model was imported from CAD using the McCad ...
2017 / Jean-Charles Jaboulay, Giacomo Aiello, Julien Aubert, Alexandro Morin, Marc Troisne -
Blast Performance of Composite Sandwich Structures
Abstract A range of composite sandwich panels with different polymeric foam cores and face-sheets were subjected to full-scale air and underwater blast testing. The air blast panels had glass fiber reinforced polymer (GFRP) face-sheets with three...
2017 / John P. Dear, Emily Rolfe, Mark Kelly, Hari Arora, Paul A. Hooper -
Magnetocaloric effect of Gd-based microwires from binary to quaternary system2017 / Y. F. Wang, F. X. Qin, Y. H. Wang, H. Wang, R. Das, et al.
-
Scanning Camera and Augmented Reality Based Localization of Omnidirectional Robot for Indoor Application
Abstract The aim of this paper is to develop an absolute visual localization system of an Omni wheeled robot for indoor navigation. Omni wheeled based robots have omni directional drive capacity. Conventional localization technique like odometry is...
2017 / Ananda Sankar Kundu, Oishee Mazumder, Ankit Dhar, Prasanna K. Lenka, Subhasis Bhaumik -
Risk Analysis and Priority Determination of Risk Prevention using Failure Mode and Effect Analysis Method in the Manufacturing Process of Hollow Core Slab
Abstract Risk management assists the practitioners in manufacturing industries to determine types of risk and the best way to treat the risk. Source of risk and the uncertain condition following the risk can be predicted, as well as the impacts of...
2017 / Theresita Herni Setiawan, Bryan Adryfan, Christopher Adhika Putra -
Bacillus Subtilis HU58 Immobilized in Micropores of Diatomite for Using in Self-healing Concrete
Abstract Recent studies reveal that using bacteria to mix into concrete material promote generating specific precipitated product. Such product allows improving physio-mechanical properties of concrete materials at both early and later age. This...
2017 / Nguyen Ngoc Tri Huynh, Nghi Mai Phuong, Nguyen Phung Anh Toan, Nguyen Khanh Son -
Seeing the unseen: uncover the bulk heterogeneous deformation processes in metallic glasses through surface temperature decoding
Deformation processes in various materials are inhomogeneous in space and jerky in time, with the shear banding in bulk metallic glasses (BMGs) as a quintessential example, but there is a lack of in situ, nondestructive observations of such processes on the...
2017 / Yang Song, Xie Xie, Jiajia Luo, Peter K. Liaw, Hairong Qi, et al. -
Stabilization of orthorhombic phase in single-crystal ZnSnN2 films2016 / Nancy Senabulya, Nathaniel Feldberg, Robert. A. Makin, Yongsoo Yang, Guangsha Shi, et al.
-
3D-Printing of Meso-structurally Ordered Carbon Fiber/Polymer Composites with Unprecedented Orthotropic Physical Properties2017 / James P. Lewicki, Jennifer N. Rodriguez, Cheng Zhu, Marcus A. Worsley, Amanda S. Wu, et al.