Materials engineering topic list of research papers
-
Fracture behaviors under pure shear loading in bulk metallic glasses2016 / Cen Chen, Meng Gao, Chao Wang, Wei-Hua Wang, Tzu-Chiang Wang
-
Exergy and the Economic Process
Abstract Physical work generation requires the existence of a heat gradient, according to the universal notion of the Carnot Heat Engine; also the corner stone of the exergy concept. Heat gradient availabilities fundamentally...
2016 / Georgios Karakatsanis -
Stress Tests on Dye-sensitized Solar Cells with the Cs2SnI6 Defect Perovskite as Hole-transporting Material
Abstract Inorganic tin perovskites appear as highly efficient materials for dye-sensitized solar cells. Despite their promising characteristics such as low cost and lack of toxicity, the stability of the corresponding devices still remains an issue...
2016 / Andreas Kaltzoglou, Dorothea Perganti, Maria Antoniadou, Athanassios G. Kontos, Polycarpos Falaras -
Hyperchaotic dynamical system based image encryption scheme with time-varying delays
Abstract In this paper, we propose a 4D chaotic image encryption technique based on a dynamic state variables selection mechanism to improve the effectiveness and security of chaos-based image cryptosystems. Experimental outcomes of our scheme...
2016 / Zia Bashir, Tabasam Rashid, Sohail Zafar -
Application of Incremental Sheet Forming2016 / Krzysztof Karbowski
-
Algorithm development of structural variables for slope reinforcement of hydrotechnic structures with synthetic materials2016 / Andrey Mikhasek, Maxim Rodionov, Vladimir Seliverstov, Yury Senitsky
-
The immiscibility of InAlN ternary alloy2016 / Guijuan Zhao, Xiaoqing Xu, Huijie Li, Hongyuan Wei, Dongyue Han, et al.
-
Investigation of significantly high barrier height in Cu/GaN Schottky diode2016 / Manjari Garg, Ashutosh Kumar, S. Nagarajan, M. Sopanen, R. Singh
-
Drug delivery systems for prolonged duration local anesthesia
Numerous drug delivery systems have been applied to the problem of providing prolonged duration local anesthesia (PDLA). Here we review the rationale for PDLA, the desirable features for and important attributes of such systems, and specific examples that have...
2016 / Claudia M. Santamaria, Alan Woodruff, Rong Yang, Daniel S. Kohane -
Material properties of the cell walls in nanofibrillar cellulose foams from finite element modelling of tomography scans2016 / Prashanth Srinivasa, Artem Kulachenko, Filip Karlberg
-
Numerical study of mixed convection heat transfer of various fin arrangements in a horizontal channel
Abstract The mixed convection of a three-dimensional square duct with various arrangements of fins in both laminar and turbulent flow is numerically characterized and studied. This study focuses on the ability of fin arrangements to enhance a heat...
2016 / Mojtaba Mokhtari, M. Barzegar Gerdroodbary, Rezvan Yeganeh, K. Fallah -
DESIGN CONCEPT OF TEST STAND FOR DETERMINING PROPERTIES OF MAGNETORHEOLOGICAL ELASTOMERS2014 / Mirosław Bocian, Jerzy Kaleta, Daniel Lewandowski, Michał Przybylski
-
Finite element analysis of the dynamic behavior of pear under impact loading
Abstract Pear fruit is susceptible to bruising from mechanical impact during field harvesting operations and at all stages of postharvest handling. The postharvest shelf life of bruised fruits were shorter, and they softened rapidly under cold...
2017 / Alireza Salarikia, Seyed-Hassan Miraei Ashtiani, Mahmood Reza Golzarian, Hamid Mohammadinezhad -
Band alignment of TiO2/FTO interface determined by X-ray photoelectron spectroscopy: Effect of annealing2016 / Haibo Fan, Zhou Yang, Xianpei Ren, Mingli Yin, Fei Gao, et al.
-
Nonlinear resonance converse magnetoelectric effect modulated by voltage for the symmetrical magnetoelectric laminates under magnetic and thermal loadings2016 / Hao-Miao Zhou, Hui Liu, Yun Zhou, Wen-Wen Hu
-
Simulation study of MEMS piezoelectric vibration energy harvester based on c-axis tilted AlN thin film for performance improvement2016 / Lingfeng Kong, Jinhui Zhang, Huiyuan Wang, Shenglin Ma, Fang Li, et al.
-
Critical Analysis of Dynamic Stall Models in Low-Order Simulation Models For Vertical-Axis Wind Turbines
Abstract The efficiency of vertical-axis wind turbines (VAWTs) still lacks from those of horizontal-axis rotors (HAWTs). To improve on efficiency, more accurate and robust aerodynamic simulation tools are needed for VAWTs, for which low-order...
2016 / Alessandro Bianchini, Francesco Balduzzi, Giovanni Ferrara, Lorenzo Ferrari -
A PCM Thermal Storage for Ground-source Heat Pumps: Simulating the System Performance via CFD Approach
Abstract The conventional design of ground source heat pumps (GSHPs) is based on the peak heating and cooling loads. A possible optimization in GSHP design, including a thermal storage device between the ground exchangers and the heat pump, was...
2016 / Emanuele Bonamente, Andrea Aquino, Franco Cotana -
Effect of hydrogen on the mechanical properties of alloy 945X (UNS N09945) and influence of microstructural features
Abstract This study investigated the hydrogen embrittlement sensitivity of the precipitation hardened (PH) alloy 945X in three different metallurgical states. The three variants examined (obtained by different heat treatments) were the standard oil...
2016 / V. Demetriou, J.D. Robson, M. Preuss, R. Morana -
Numerical simulation of large deformations of amorphous polymer with finite element method: Application to normal impact test2015 / C.A. Bernard, J.P.M. Correia, N. Bahlouli, S. Ahzi