Materials engineering topic list of research papers
-
Pressure dependence of the band gap energy for the dilute nitride GaNxAs1−x2016 / Chuan-Zhen Zhao, Tong Wei, Xiao-Dong Sun, Sha-Sha Wang, Ke-Qing Lu
-
Current characteristics of various ejection modes in electrohydrodynamic printing2015 / Xiang Wang, Gaofeng Zheng, Zhiwei Luo, Wenwang Li
-
Hygrothermal Performance of Highly Insulated Timber-frame External Wall
Abstract The nearly zero energy buildings (nZEB) ideology foresees first and foremost that heat losses should be reduced remarkably compared to the present levels. The European Union has adopted an ambitious vision for the energy efficiency of its...
2016 / Peep Pihelo, Henri Kikkas, Targo Kalamees -
Mechanical properties and microstructural change of W–Y2O3 alloy under helium irradiation2015 / Xiaoyue Tan, Laima Luo, Hongyu Chen, Xiaoyong Zhu, Xiang Zan, et al.
-
The improvement of all-solid-state electrochromic devices fabricated with the reactive sputter and cathodic arc technology2016 / Min-Chuan Wang, Yung-Chih Chen, Ming-Hao Hsieh, Yu-Chen Li, Jen-Yuan Wang, et al.
-
Perspective: Probing 2-D magnetic structures in a 3-D world2016 / A. J. Grutter
-
Graphene damage effects on radiation-resistance and configuration of copper–graphene nanocomposite under irradiation: A molecular dynamics study2016 / Hai Huang, Xiaobin Tang, Feida Chen, Jian Liu, Huan Li, et al.
-
Weight reduction and strengthening of marine hatch covers by using composite materials2016 / Basem E. Tawfik, Heba Leheta, Ahmed Elhewy, Tarek Elsayed
-
Structural defects and recombination behavior of excited carriers in Cu(In,Ga)Se2 solar cells2016 / J. Yang, H. W. Du, Y. Li, M. Gao, Y. Z. Wan, et al.
-
On the estimation of the magnetocaloric effect by means of microwave technique2012 / Pavlo Aleshkevych
-
Electro-optical switch based on continuous metasurface embedded in Si substrate2015 / Yali Sun, Yonghong Ling, Tongjun Liu, Lirong Huang
-
Modelling and Performance Analysis of U Type Evacuated Tube Solar Collector Using Different Working Fluids
Abstract This paper presents the mathematical modelling of a U type evacuated tube solar collector required for heating a working fluid. The developed mathematical model is used for predicting the outlet temperature and net heat gain by the working...
2016 / B. Kiran Naik, A. Varshney, P. Muthukumar, C. Somayaji -
A novel broadband waterborne acoustic absorber2016 / Changxian Wang, Weibin Wen, Yixing Huang, Mingji Chen, Hongshuai Lei, et al.
-
Effect of tool plunge depth on reinforcement particles distribution in surface composite fabrication via friction stir processing
Abstract Aluminium matrix surface composites are gaining alluring role especially in aerospace, defence, and marine industries. Friction stir processing (FSP) is a promising novel solid state technique for surface composites fabrication. In this...
2016 / Sandeep Rathee, Sachin Maheshwari, Arshad N. Siddiquee, Manu Srivastava -
Notch strengthening or weakening governed by transition of shear failure to normal mode fracture2015 / Xianqi Lei, Congling Li, Xinghua Shi, Xianghong Xu, Yujie Wei
-
Optical Optimization of Perovskite Solar Cell Structure for Maximum Current Collection
Abstract High conversion efficiency has been recently demonstrated for Perovskite thin film photovoltaic devices. Perovskite thin film solar cells are multilayer opto-electrical structures in which light interference occurs. This phenomenon can be...
2016 / P.M. Kaminski, P.J.M. Isherwood, G. Womack, J.M. Walls -
High hole mobility p-type GaN with low residual hydrogen concentration prepared by pulsed sputtering2016 / Yasuaki Arakawa, Kohei Ueno, Atsushi Kobayashi, Jitsuo Ohta, Hiroshi Fujioka
-
An ab initio study of the polytypism in InP2016 / Luis C. O. Dacal, A. Cantarero
-
Engineering the heterogeneous nuclei in Al-Si alloys for solidification control
Abstract Aluminium alloys are particularly advantageous for transportation industries to reduce the weight of the vehicles and thus pollution. The optimisation of the performances of Al alloys can be achieved by engineering and enhancing the...
2016 / Leandro Bolzoni, Nadendla Hari Babu -
Elastic constants of fibrous polymer composite materials reinforced with transversely isotropic fibers2015 / J. Venetis, E. Sideridis