Materials engineering topic list of research papers
-
High-permeance crosslinked PTMSP thin-film composite membranes as supports for CO2 selective layer formation
Abstract In the development of the composite gas separation membranes for post-combustion CO2 capture, little attention is focused on the optimization of the membrane supports, which satisfy the conditions of this technology. The primary...
2016 / Stepan D. Bazhenov, Ilya L. Borisov, Danila S. Bakhtin, Anastasia N. Rybakova, Valery S. Khotimskiy, et al. -
An ytterbium quantum gas microscope with narrow-line laser cooling2016 / Ryuta Yamamoto, Jun Kobayashi, Takuma Kuno, Kohei Kato, Yoshiro Takahashi
-
Band Saw Blade Crack before and after Comparison and Analysis of Experiments (2)2016 / Jin-gui Gao, Zhao-fang Jiang, Jian Zhang, Hui Li, De-jun Shen, et al.
-
Back- and Front-side Texturing for Light-management in Perovskite / Silicon-heterojunction Tandem Solar Cells
Abstract The perovskite / silicon-heterojunction (SHJ) tandem solar cell can theoretically overcome the efficiencies of the single junction solar cells with experimental results not far behind. Here, we use optical simulations to analyze the...
2016 / M. Jošt, S. Albrecht, B. Lipovšek, J. Krč, L. Korte, et al. -
Surface Analysis for Signs of Corrosion of Fixed Orthodontic Appliances Used In Vivo2016 / M. Łępicka, M. Grądzka-Dahlke
-
Ultrasonic and IR Thermographic Detection of a Defect in a Multilayered Composite Plate
Abstract Multi-layered composites are frequently used in many applications as constructional materials. Such materials represent a difficult inspection task for some traditional techniques of non-destructive testing (NDT). Typical defects of...
2016 / L. Maio, V. Memmolo, S. Boccardi, C. Meola, F. Ricci, et al. -
Influence of Activated Carbon Particles on Intermetallic Compound Growth Mechanism in Sn-Cu-Ni Composite Solder2016 / M.I.I. Ramli, M.A.A. Mohd Salleh, M.N. Derman, R.M. Said, N. Saud
-
Laboratory and field testing of bolting systems subjected to highly corrosive environments
Abstract The capacity of ground support components which have been affected by corrosion is reduced and may ultimately lead to dynamic failure of the component and the strata. In order to maintain an effective, long-term ground support system,...
2016 / Tom Meikle, Stephen C. Tadolini, Bre-Anne Sainsbury, John Bolton -
Advancements in Hybrid Photovoltaic-thermal Systems: Performance Evaluations and Applications
Abstract Due to European Directives the electric and thermal energy needs of new and retrofitted buildings have to be satisfied by increasing percentages of renewable energy. Solar energy and heat pumps are the most promising technologies mainly in...
2016 / Marco Noro, Renato Lazzarin, Giacomo Bagarella -
Theoretical and experimental analysis of AlGaInP micro-LED array with square-circle anode2014 / Chao Tian, Weibiao Wang, Jingqiu Liang, Zhongzhu Liang, Yuxin Qin, et al.
-
Non-linearly Restoring Performance of SFT's Catenary Mooring-lines under Consideration of its Dynamic Behaviors
Abstract Submerged floating tunnel (SFT) needs to be fixed or controlled in expected position by its supporting system which can be classified into two types: tension tendon or catenary mooring-line. The later one, catenary mooring-line, is often...
2016 / Shuangxi Guo, Weimin Chen, Yiqin Fu -
A multilevel nonvolatile magnetoelectric memory2016 / Jianxin Shen, Junzhuang Cong, Dashan Shang, Yisheng Chai, Shipeng Shen, et al.
-
In-situ NC-AFM measurements of high quality AlN(0001) layers grown at low growth rate on 4H-SiC(0001) and Si(111) substrates using ammonia molecular beam epitaxy2015 / Florian Chaumeton, Sébastien Gauthier, David Martrou
-
The Nature of Metastable AA’ Graphite: Low Dimensional Nano- and Single-Crystalline Forms2016 / Jae-Kap Lee, Jin-Gyu Kim, K. P. S. S. Hembram, Yong-Il Kim, Bong-Ki Min, et al.
-
High resolution microstructural studies of the evolution of nano-scale, yttrium-rich oxides in ODS steels subjected to ball milling, selective laser melting or friction stir welding
Abstract Coarse-grained ferritic Oxide Dispersion Strengthened (ODS) FeCrAlY alloys were initially developed for use in high temperature environments due to their excellent creep strength and oxidation resistance. More recently, ODS materials...
2016 / G. J. Tatlock, K. Dawson, T. Boegelein, K. Moustoukas, A. R. Jones -
A Novel 3-Input AND/XOR Gate Circuit for Reed-Muller Logic Applications2016 / Yuan Yang, Yinshui Xia, Libo Qian
-
Demonstration of Complementary Ternary Graphene Field-Effect Transistors2016 / Yun Ji Kim, So-Young Kim, Jinwoo Noh, Chang Hoo Shim, Ukjin Jung, et al.
-
First-principles study of the phase stability and the mechanical properties of W-Ta and W-Re alloys2014 / Ning Wei, Ting Jia, Xiaoli Zhang, Ting Liu, Z. Zeng, et al.
-
Global Manufacturing of CAR T-Cell Therapy
Immunotherapy using chimeric antigen receptor-modified T cells has demonstrated high response rates in patients with B cell malignancies, and chimeric antigen receptor T cell therapy is now being investigated in several hematologic and solid tumor types. Chimeric...
2017 / Bruce L. Levine, James Miskin, Keith Wonnacott, Christopher Keir -
Characterization and antibacterial activity of nickel ferrite doped α-alumina nanoparticle
Abstract The magnetic behaviour towards biomedical applications of transition metal-ferrite and transition metal-ferrite based nanoparticles is dependent upon the nanoparticles preparation parameters. In this study, an experimental design using...
2016 / Kariim Ishaq, Abdulkareem Ambali Saka, Abubakre Oladiran Kamardeen, Aliyu Ahmed, Mohammed Is'haq Alhassan, et al.