Materials engineering topic list of research papers
-
Epitaxial lateral overgrowth of InN by rf-plasma-assisted molecular-beam epitaxy2011 /
-
Fast vapor phase growth of SiO2 nanowires via surface-flow on Ag core/SiO2 shell structure2012 / Lei Gao, Ailing Ji, Nianpeng Lu, Chaorong Li, Zexian Cao
-
Low temperature CVD growth of ultrathin carbon films2016 / Chao Yang, Peng Wu, Wei Gan, Muhammad Habib, Weiyu Xu, et al.
-
Influence of volume percentage of NanoTiB2 particles on tribological & mechanical behaviour of 6061-T6 Al alloy nano-surface composite layer prepared via friction stir process
Abstract The aim of present study is to analyze the influence of volume percentage (vol.%) of nano-sized particles (TiB2: average size is 35 nm) on microstructure, mechanical and tribological behavior of 6061-T6 Al alloy surface nano composite...
2016 / V. Kishan, Aruri Devaraju, K. Prasanna Lakshmi -
In-situ imaging of tungsten surface modification under ITER-like transient heat loads
Abstract Experimental research on behavior of rolled tungsten plates under intense transient heat loads generated by a powerful (a total power of up to 7 MW) long-pulse (0.1–0.3ms) electron beam with full irradiation area of 2 cm2 was carried out....
2016 / A.A. Vasilyev, A.S. Arakcheev, I.A. Bataev, V.A. Bataev, A.V. Burdakov, et al. -
Preparation and characterisation of Al-doped ZnO and PVDF composites2016 / Ju Peihai, Weng Ling, Liu Lizhu, Zhang Xiaorui
-
Folded cladding porous shaped photonic crystal fiber with high sensitivity in optical sensing applications: Design and analysis
Abstract A micro structure folded cladding porous shaped with circular air hole photonic crystal fiber (FP-PCF) is proposed and numerically investigated in a broader wavelength range from 1.4µm to 1.64µm (E+S+C+L+U) for chemical sensing purposes....
2016 / Bikash Kumar Paul, Kawsar Ahmed, Sayed Asaduzzaman, Md. Shadidul Islam -
Understanding Metal Induced Recombination Losses in Silicon Solar Cells with Screen Printed Silver Contacts
Abstract There have been great improvements in silicon solar cell voltage across the last 5 years. A great deal of the gains can be attributed to application of lighter phosphorus emitter diffusions which deliver higher cell voltages, combined with...
2016 / Daniel Inns -
Characteristic of Oxide Layers Obtained on Titanium in the Process of Thermal Oxidation2016 / K. Aniołek, M. Kupka, A. Barylski, Ł. Mieszczak
-
Molecular dynamics simulations of cascades in strained carbide inclusions embedded in α-iron2015 / K. O. E. Henriksson, K. Nordlund
-
Formation mechanism of electrical discharge TiC-Fe composite coatings
Abstract Comparison of electric discharge (ED) processed single deposit and continuum TiC-Fe cermet coatings, formed from a sacrificial powder metallurgy TiC tool electrode at negative polarity, on 304 stainless steel, provided insight into the ED...
2016 / J.W. Murray, S.J. Algodi, M.W. Fay, P.D. Brown, A.T. Clare -
Failure Investigation for QP Steel Sheets under uniaxial and Equal-Biaxial Tension Conditions2016 / Danqing Zou, Shuhui Li, Ji He, Ronggao Cui
-
Assessing the capability of in-situ nondestructive analysis during layer based additive manufacture
Abstract Unlike more established subtractive or constant volume manufacturing technologies, additive manufacturing methods suffer from a lack of in-situ monitoring methodologies which can provide information relating to process performance and the...
2016 / Matthias Hirsch, Rikesh Patel, Wenqi Li, Guangying Guan, Richard K. Leach, et al. -
Application of the Sol-Gel Method at the Fabrication of PLZT:Yb3+ Ceramics2016 / K. Osińska, M. Płońska, A. Marzec
-
Analysis of Temperature Field, Heat and Fluid Flow of Two-Phase Zone Continuous Casting Cu–Sn Alloy Wire2016 / J. Luo, X. Liu, X. Wang
-
A simplified HTc rf SQUID to analyze the human cardiac magnetic field2014 /
-
Surface integrity analysis in turning A03190/304 composites with network reinforcement
Abstract A03190/304 composite specimen with network reinforcement has been prepared by means of metal die casting. Turning experiments and analysis of roughness and integrity of machined surface on A03190/304 composite specimen have been done with...
2016 / Yang Qiao, Ning Fan, Peiquan Guo, Yang Bai, Shouren Wang -
Dynamic VOF Modelling of the Internal Flow in GDI Fuel Injectors
Abstract High-fidelity transient simulations of turbulent flows usually require highly resolved grids, leading to unacceptable large computational wall times even on large supercomputers. In an attempt to address this limitation, a hybrid...
2016 / F. Giussani, A. Montorfano, F. Piscaglia, A. Onorati, J. Hélie, et al. -
Invited Review Article: Review of post-process optical form metrology for industrial-grade metal additive manufactured parts2016 / P. I. Stavroulakis, R. K. Leach
-
Carbon Fiber Composite Materials Finite Element Simulation Analysis of Cutting Force
Abstract Carbon fiber composite material as an advanced composite material is widely used in aviation, aerospace, defense and automotive, electronic information and high-speed machinery and other civilian areas. Since the carbon fiber composite...
2016 / Mingyang Wu, Yongbin Gao, Yaonan Cheng, Bo Wang, Tingyu Huo