Materials engineering topic list of research papers
-
Design for additive manufacturing of composite materials and potential alloys: a review2016 / Hussien A. Hegab
-
On loading velocity oscillations during dynamic tensile testing with flying wheel systems2015 / Borja Erice, Christian Roth, Gerard Gary, Dirk Mohr
-
Effect Of Steel Flow Control Devices On Flow And Temperature Field In The Tundish Of Continuous Casting Machine2015 / L. Sowa
-
Modeling of hydrogen atom diffusion and response behavior of hydrogen sensors in Pd–Y alloy nanofilm2016 / Yi Liu, Yanli Li, Pengcheng Huang, Han Song, Gang Zhang
-
The pore-load modulus of ordered nanoporous materials with surface effects2016 / Mingchao Liu, Jian Wu, Yixiang Gan, C. Q. Chen
-
Properties of the Aluminium Alloy EN AC-51100 after Laser Surface Treatment2016 / T. Tański, W. Pakieła, D. Janicki, B. Tomiczek, M. Król
-
Weldability of S500MC Steel in Underwater Conditions2015 / D. Fydrych, J. Łabanowski, G. Rogalski, J. Haras, J. Tomków, et al.
-
Progress on electrocaloric multilayer ceramic capacitor development2016 / Sakyo Hirose, Tomoyasu Usui, Sam Crossley, Bhasi Nair, Akira Ando, et al.
-
Growth of InxGa1−xSb alloy semiconductor at the International Space Station (ISS) and comparison with terrestrial experiments2015 / Y Inatomi, K Sakata, M Arivanandhan, G Rajesh, V Nirmal Kumar, et al.
-
Tensile Response of Hoop Reinforced Multiaxially Braided Thin Wall Composite Tubes2016 / Sree Shankhachur Roy, Prasad Potluri, Constantinos Soutis
-
Neutron radiation effects on linear CCDs at different clock pulse frequency2015 / Zujun Wang, Wei Chen, Benqi Tang, Zhigang Xiao, Zhibin Yao, et al.
-
Fatigue Reliability Analysis of Cable Considering Corrosion
Abstract According to the principle and the basic concept of vortex-induced vibration, this paper deduces the vortex-induced vibration of cable vibration partial differential equation, the floating tunnel body section is simplified to the influence...
2016 / Hongsheng Yan, Yang Yuan, Jianxing Yu -
A high-throughput technique for determining grain boundary character non-destructively in microstructures with through-thickness grains2016 / Matteo Seita, Marco Volpi, Srikanth Patala, Ian McCue, Christopher A Schuh, et al.
-
The synergistic effect of catalysts on hydrogen desorption properties of MgH2–TiO2–NiO nanocomposite2016 / Farshad Rajabpour, Sharham Raygan, Hossein Abdizadeh
-
Experimental study on vortex-induced motions of a semi-submersible with square columns and pontoons at different draft conditions and current incidences2016 / Mingyue Liu, Longfei Xiao, Haining Lu, Xiaolong Xiao
-
AuPt Alloy Nanostructures with Tunable Composition and Enzyme-like Activities for Colorimetric Detection of Bisulfide2017 / Weiwei He, Xiangna Han, Huimin Jia, Junhui Cai, Yunlong Zhou, et al.
-
Enhancing radiation tolerance by controlling defect mobility and migration pathways in multicomponent single-phase alloys2016 / Chenyang Lu, Liangliang Niu, Nanjun Chen, Ke Jin, Taini Yang, et al.
-
A phononic crystal strip based on silicon for support tether applications in silicon-based MEMS resonators and effects of temperature and dopant on its band gap characteristics2016 / Thi Dep Ha, JingFu Bao
-
Theory and experimental evidence of phonon domains and their roles in pre-martensitic phenomena2015 / Yongmei M Jin, Yu U Wang, Yang Ren
-
Assessment of energy release mechanisms contributing to coal burst
Abstract Coal burst is a dynamic release of energy within the rock (or coal) mass leading to high velocity expulsion of the broken/failed material into mine openings. This phenomenon has been recognised as one of the most catastrophic failures...
2016 / Chengguo Zhang, Ismet Canbulat, Faham Tahmasebinia, Bruce Hebblewhite