Materials engineering topic list of research papers
-
Thermal properties of a new ecological building material / Granular cork embedded in white cement2014 / Abou-bakr Cherki, Abdelhamid Khabbazi, Soumia Mounir, Youssef Maaloufa
-
Effect of strain rate and dislocation density on the twinning behavior in tantalum2016 / Jeffrey N. Florando, Bassem S. El-Dasher, Changqiang Chen, Damian C. Swift, Nathan R. Barton, et al.
-
Refinement and growth enhancement of Al2Cu phase during magnetic field assisting directional solidification of hypereutectic Al-Cu alloy2016 / Jiang Wang, Sheng Yue, Yves Fautrelle, Peter D. Lee, Xi Li, et al.
-
Competition between strain and dimensionality effects on the electronic phase transitions in NdNiO3 films2015 / Le Wang, Sheng Ju, Lu You, Yajun Qi, Yu-wei Guo, et al.
-
Advanced materials for a damage resilient divertor concept for DEMO: Powder-metallurgical tungsten-fibre reinforced tungsten
Abstract Material issues pose a significant challenge for future fusion reactors like DEMO. When using materials in a fusion environment a highly integrated approach is required. Damage resilience, power exhaust, as well as oxidation resistance...
2016 / J.W. Coenen, Y. Mao, J. Almanstötter, A. Calvo, S. Sistla, et al. -
Mechanical behavior of carbon nanotube and graphene junction as a building block for 3D carbon nanostructures2015 / Mina Moradi, Jamshid Aghazadeh Mohandesi
-
Effect of the Combined Heat Treatment and Severe Plastc Deformation on the Microstructure of Cunisi Alloy2016 / W. Głuchowski, Z. Rdzawski, J. Sobota, J. Domagała-Dubiel
-
Shock compression response of forsterite above 250 GPa2016 / T. Sekine, N. Ozaki, K. Miyanishi, Y. Asaumi, T. Kimura, et al.
-
Structural phase transitions in Bi2Se3 under high pressure2015 / Zhenhai Yu, Lin Wang, Qingyang Hu, Jinggeng Zhao, Shuai Yan, et al.
-
Thermal and Fluid Characteristics of a Latent Heat Thermal Energy Storage Unit
Abstract Latent heat thermal energy storage (LHTES) is a promising way to smooth the discrepancy between energy supply and demand, and it is now becoming increasingly significant in the heating and cooling of buildings. However, the low thermal...
2016 / Xiaohu Yang, Yang Li, Zhao Lu, Lianying Zhang, Qunli Zhang, et al. -
A Cyber-physical System Architecture in Shop Floor for Intelligent Manufacturing
Abstract A Cyber-physical System (CPS) architecture in shop floor is proposed for achieving the goals of intelligent manufacturing. The proposed architecture provides a guideline to construct a CPS system from the hardware interconnection, to the...
2016 / Chao Liu, Pingyu Jiang -
Comparative study on twinning characteristics during two post-weld compression paths and their effects on joint enhancement2016 / Zhe Liu, Renlong Xin, Dongrong Li, Liyun Sun, Qing Liu
-
Investigation of structural, electronic, elastic and optical properties of Cd1-x-yZnxHgyTe alloys2016 / M. Tamer
-
Fluorescence microscopy reveals molecular localisation at line defects in nematic liquid crystals2016 / Takuya Ohzono, Kaoru Katoh, Jun-ichi Fukuda
-
Cryogenic Processing of HSS M2: Mechanical Properties and XRD Analysis2016 / Ish Hunar Sharma, Satpal Sharma
-
An overview of molecular acceptors for organic solar cells2013 / Piétrick Hudhomme
-
The Development of a Tool to Promote Sustainability in Casting Processes
Abstract The drive of the manufacturing industry towards productivity, quality and profitability has been supported in the last century by the availability of relatively cheap and abundant energy sources with limited focus on the minimisation of...
2016 / Emanuele Pagone, Mark Jolly, Konstantinos Salonitis -
A half-metallic half-Heusler alloy having the largest atomic-like magnetic moment at optimized lattice constant2016 / R. L. Zhang, L. Damewood, C. Y. Fong, L. H. Yang, R. W. Peng, et al.
-
Structure and composition of layers of Ni-Co-Mn-In Heusler alloys obtained by pulsed laser deposition2016 / Grzegorz Wisz, Piotr Sagan, Ireneusz Stefaniuk, Bogumil Cieniek, Wojciech Maziarz, et al.
-
Influence of the gate edge on the reverse leakage current of AlGaN/GaN HEMTs2015 / YongHe Chen, XiaoHua Ma, WeiWei Chen, Bin Hou, JinCheng Zhang, et al.