Materials engineering topic list of research papers
-
Stabilization of weak ferromagnetism by strong magnetic response to epitaxial strain in multiferroic BiFeO32015 / Hemant Dixit, Jun Hee Lee, Jaron T. Krogel, Satoshi Okamoto, Valentino R. Cooper
-
Effects of Aluminum in Metallization Paste on the Electrical Losses in Bifacial N-type Crystalline Silicon Solar Cells
Abstract Silver/aluminum (Ag/Al) paste has been used as metallization for p+ emitter of n-type solar cells. Nevertheless, the Ag/Al paste induces junction current leakage or shunting in the solar cells, resulting loss in open circuit voltage (Voc)....
2016 / Takayuki Aoyama, Mari Aoki, Isao Sumita, Yasushi Yoshino, Atsushi Ogura -
Effect of Image Enhancement on MRI Brain Images with Neural Networks
Abstract Since human body's standard control metabolism stops, old cells do not die and these abnormal cells forms a mass of tissue, known as tumor. In order to diagnose tumors, huge biomedical machines such as MRI, PET-CT, and MG machines are used. ...
2016 / Kamil Dimililer, Ahmet İlhan -
Structural, Mechanical and Tribological Properties of Spark Plasma Sintered Ti6Al4V Alloy2016 / A. Mróz, D. Garbiec, A. Wielowiejska-Giertuga, T. Wiśniewski, M. Gierzyńska-Dolna, et al.
-
The Role of Necroptosis in Atherosclerotic Disease
Summary It is now known that cells do not always die by apoptosis, but can also undergo a process known as programmed cell necrosis, or necroptosis. In a study recently published in Science Advances, investigators reported that this proinflammatory...
2016 / Nicholas J. Leeper -
Systematic study on dynamic atomic layer epitaxy of InN on/in +c-GaN matrix and fabrication of fine-structure InN/GaN quantum wells: Role of high growth temperature2016 / Akihiko Yoshikawa, Kazuhide Kusakabe, Naoki Hashimoto, Eun-Sook Hwang, Daichi Imai, et al.
-
Infrared preheating to improve interlayer strength of big area additive manufacturing (BAAM) components
Abstract The Big Area Additive Manufacturing (BAAM) system can print structures on the order of several meters at high extrusion rates, thereby having the potential to significantly impact automotive, aerospace and energy sectors. The functional use ...
2016 / Vidya Kishore, Christine Ajinjeru, Andrzej Nycz, Brian Post, John Lindahl, et al. -
Construction of Intelligent Manufacturing Workshop Based on Lean Management
Abstract With the development of a new round of revolution of science and technology, the traditional manufacturing industry is gradually upgrading to the direction of intelligent manufacturing. In this process, informatization and industrialization ...
2016 / Qing Gao, Rongbo Shi, Gang Wang -
Superplastic forming and diffusion bonding: Progress and trends2015 / Li Zhiqiang, Zhao Bing, Chen Wei
-
Bipolar resistive switching behaviors of ITO nanowire networks2016 / Qiang Li, Zhina Gong, Shuai Wang, Jiangteng Wang, Ye Zhang, et al.
-
Deformation-Induced Supersaturation in Immiscible Material Systems during High-Pressure Torsion2016 / Karoline Sophie Kormout, Reinhard Pippan, Andrea Bachmaier
-
Influence of Cr2O3 additive and sintering temperature on the structural characteristics and piezoelectric properties of Bi4Ti2.95W0.05O12.05 Aurivillius ceramics
Abstract In this paper, Cr2O3 (0–0.4wt%) as an additive was added into Bi4Ti2.95W0.05O12.05 (BITW) for preparing a kind of W/Cr co-doped BIT (BITW-yCr) Aurivillius ceramics, both W6+ and Cr3+ are considered to substitute Ti4+ in the [TiO6]...
2016 / Yu Chen, Shaoxiong Xie, Qingyuan Wang, Jianguo Zhu -
Detection of deuterium trapping sites in tungsten by thermal desorption spectroscopy and positron annihilation spectroscopy
Abstract Thermal desorption spectroscopy (TDS) of tungsten implanted with D2 + ions was performed after irradiation with 8 MeV-electrons, 5.0keV-D2 +, and 6.0 MeV-Fe3+. The release peak temperatures of the...
2016 / K. Sato, R. Tamiya, Q. Xu, H. Tsuchida, T. Yoshiie -
Predictive Model of Graphene Based Polymer Nanocomposites: Electrical Performance2016 / Asimina Manta, Matthieu Gresil, Constantinos Soutis
-
Research Update: Cu–S based synthetic minerals as efficient thermoelectric materials at medium temperatures2016 / Koichiro Suekuni, Toshiro Takabatake
-
An improved tensile deformation model for in-situ dendrite/metallic glass matrix composites2015 / X. H. Sun, J. W. Qiao, Z. M. Jiao, Z. H. Wang, H. J. Yang, et al.
-
Mechanochemical synthesis of high thermoelectric performance bulk Cu2X (X = S, Se) materials2016 / Dongwang Yang, Xianli Su, Yonggao Yan, Jian He, Ctirad Uher, et al.
-
Commentary: JWST near-infrared detector degradation— finding the problem, fixing the problem, and moving forward2012 / Bernard J. Rauscher, Carl Stahle, Robert J. Hill, Matthew Greenhouse, James Beletic, et al.
-
Influence of silicon on high-temperature (600°C) chlorosilane interactions with iron
Abstract High-temperature (>500°C) chlorosilane gas streams are prevalent in the manufacture of polycrystalline silicon, the feedstock for silicon-based solar panels and electronics. This study investigated the influence of metallurgical grade...
2016 / Josh Aller, Nolan Swain, Michael Baber, Greg Tatar, Nathan Jacobson, et al. -
Gelatin as a new humidity sensing material: Characterization and limitations2014 / Steven Shapardanis, Mathew Hudpeth, Tolga Kaya