Materials engineering topic list of research papers
-
Unipolar resistive switching with forming-free and self-rectifying effects in Cu/HfO2/n-Si devices2016 / M. J. Wang, S. Gao, F. Zeng, C. Song, F. Pan
-
Tribological properties of nanocrystalline diamond films deposited by hot filament chemical vapor deposition2012 / N. Kumar, K. Panda, S. Dash, C. Popov, J. P. Reithmaier, et al.
-
Effect of post-treatment on photocatalytic oxidation activity of (111) oriented NaNbO3 film2015 / Feng Zhang, Zhou Wu, Bingyang Sun, Guoqiang Li, Weifeng Zhang
-
EtherCAT-integrated Processing Machine with Full Local Task Redundancy
Abstract A numerically controlled processing machine, integrated over EtherCAT with full local redundancy in the axes- to task-space mapping has been designed and built in a laboratory. The redundancy arises from a set of slow, long-ranging base...
2016 / Morten Lind, Erik Morset, Martin Bredeli -
Real-time Kinematic Positioning of INS Tightly Aided Multi-GNSS Ionospheric Constrained PPP2016 / Zhouzheng Gao, Wenbin Shen, Hongping Zhang, Xiaoji Niu, Maorong Ge
-
Towards Behavior Control for Evolutionary Robot Based on RL with ENN2013 / Jingan Yang, Yanbin Zhuang, Chunguang Li
-
Energy and Exergy Analysis of Wood-based CHP. Case Study
Abstract The paper presents use of energy and exergy analyses for the assessment of input and output flows in a cogeneration plant, shows points of exergy degradation in a system and allows to make a quantitative evaluation of energy quality...
2016 / Katrina Karklina, Ginta Cimdina, Ivars Veidenbergs, Dagnija Blumberga -
Nucleation and growth of (10͞11) semi-polar AlN on (0001) AlN by Hydride Vapor Phase Epitaxy2016 / Ting Liu, Jicai Zhang, Xujun Su, Jun Huang, Jianfeng Wang, et al.
-
A multiaxial load-induced thermal strain constitutive model for concrete
Abstract The paper presents a novel thermomechanical 3D Load-Induced Thermal Strain (LITS) model that captures the experimentally demonstrated behavior of concrete in the case of heating under multiaxial mechanical load, for temperatures up to...
2016 / Giacomo Torelli, Martin Gillie, Parthasarathi Mandal, Van-Xuan Tran -
Online Tool Wear Measurement for Hobbing of Highly Loaded Gears in Geared Turbo Fans
Abstract Continuous increase in flight passengers alongside with a high demand for fuel efficiency has led to the development of Geared Turbo Fans (GTF). Being a safety-critical part, the gearbox faces strong safety requirements that also account...
2016 / Fritz Klocke, Benjamin Döbbeler, Sven Goetz, Julian Staudt -
Cu-(B4C)p metal matrix composites processed by accumulative roll-bonding
Abstract In this study, Cu/B4C metal matrix composites were prepared by accumulative roll-bonding (ARB). The microstructure of the processed samples was characterized by TEM, SEM and optical microscopy. The microhardness, uniaxial tensile and...
2016 / S. Mansourzadeh, M. Hosseini, E. Salahinejad, A.H. Yaghtin -
Grain distinct stratified nanolayers in aluminium alloys
Abstract The grains of aluminium alloys have stratified nanolayers which determine their mechanical and chemical responses. In this study, the nanolayers were revealed in the grains of AA6082 (T6 and T7 conditions), AA5083-O and AA2024-T3 alloys by...
2016 / U. Donatus, G.E. Thompson, X. Zhou, J. Alias, I.-L. Tsai -
Microstructural Investigations of Ultra-High Performance Concrete Obtained by Pressure Application within the First 24 Hours of Hardening2013 / Janis Justs, Diana Bajare, Aleksandrs Korjakins, Gundars Mezinskis, Janis Locs, et al.
-
TiO2/PANI nanocomposite loaded in PVA for anticorrosive applications2016 / Rajeev Arora, Anupam Srivastav, Utam Kumar Mandal, Pankaj Sharma
-
Highly Bendable In-Ga-ZnO Thin Film Transistors by Using a Thermally Stable Organic Dielectric Layer2016 / Yogeenth Kumaresan, Yusin Pak, Namsoo Lim, Yonghun kim, Min-Ji Park, et al.
-
Performance evaluation of cement-stabilized pond ash-rice husk ash-clay mixture as a highway construction material
Abstract This paper reports the results of an investigation carried out on clay soil stabilized with pond ash (PA), rice husk ash (RHA) and cement. Modified Proctor compaction tests were performed in order to investigate the compaction behavior of...
2016 / Deepak Gupta, Arvind Kumar -
Nucleation and growth kinetics of La0.7Sr0.3Cr0.4Mn0.6O3-δ SOFC perovskite: Symmetry alteration evolution induced by Cu2+ and Ni2+ impregnation
Abstract La0.7Sr0.3Cr0.4Mn0.6O3-δ perovskite nanoparticles have been synthetized using an ethylene glycol modified sol-gel method and impregnated by Cu0.75Ni0.25 nanoparticles. The phase transitions and nucleation kinetics were studied by time...
2016 / A. Concha-Balderrama, G. Rojas-George, J. Alvarado-Flores, H. Esparza-Ponce, M.H. Bocanegra-Bernal, et al. -
Enhancing spectral contrast in organic red-light photodetectors based on a light-absorbing and exciton-blocking layered system2010 / Yusuke Higashi, Kyu-Sik Kim, Hyeon-Gu Jeon, Musubu Ichikawa
-
Advanced Technologies for Appropriate Control of Heat and Light at Windows
Abstract Windows are thermally weak compared with external walls and roofs, and have a large effect on the indoor thermal and light environments, and the energy used for lighting and for heating, ventilation, and air-conditioning. Furthermore, it is ...
2016 / Takashi Inoue, Masayuki Ichinose -
An Experimental Study on Combustion and Emission Analysis of Four Cylinder 4-Stroke Gasoline Engine Using Pure Hydrogen and LPG at Idle Condition
Abstract Fluctuation in oil prices and stricter exhaust emission norms were the main reasons wakening every researcher to search for suitable and feasible alternative fuels for automotive use. Among the available option gaseous fuels find their best ...
2016 / P.R. Chitragar, K.V. Shivaprasad, Vighnesh Nayak, P. Bedar, G.N. Kumar