Materials engineering topic list of research papers
-
Closed Loop PMI Driven Dimensional Quality Lifecycle Management Approach for Smart Manufacturing System
Abstract In order to devise, build and control a self-organizing smart manufacturing system for certain modular product architecture to support mass personalization, it is essential to accurately predict quality and performance of the manufacturing...
2016 / Frank Zhigang Fang, Zhaoyan Li, Alan Arokiam, Terry Gorman -
High-Temperature Performance of Ferritic Steels in Fireside Corrosion Regimes: Temperature and Deposits2016 / T. Dudziak, T. Hussain, N. J. Simms
-
Grain Boundary Specific Segregation in Nanocrystalline Fe(Cr)2016 / Xuyang Zhou, Xiao-xiang Yu, Tyler Kaub, Richard L. Martens, Gregory B. Thompson
-
Lingunite-a high-pressure plagioclase polymorph at mineral interfaces in doleritic rock of the Lockne impact structure (Sweden)2016 / Amar Agarwal, Boris Reznik, Agnes Kontny, Stefan Heissler, Frank Schilling
-
Estimation of Optimum Heat Exchanger Area of Vapor Compression-absorption Integrated System Using Modified Irreversibility Approach
Abstract This paper presents the optimum size and cost estimation of vapor compression-absorption integrated system (VCAIS) using coefficient of structural bonds (CSB) method of thermoeconomic optimization. The optimum area of heat exchanger is...
2016 / Vaibhav Jain, Gulshan Sachdeva, Surendra S. Kachhwaha -
Silicon nanoparticles that can manipulate light2016 / Laurie Donaldson
-
Induced conductivity in sol-gel ZnO films by passivation or elimination of Zn vacancies2016 / D. J. Winarski, W. Anwand, A. Wagner, P. Saadatkia, F. A. Selim, et al.
-
Optimal Pass Planning for Robotic Welding of Large-dimension Joints with Deep Grooves
Abstract Large-dimension welding joints are widely used in shipyards and oilfields. These joints need multi-pass welding processes and tens of hours to complete. Although the development of robotic welding techniques shortens the welding time, it is ...
2016 / S.J. Yan, S.K. Ong, A.Y.C. Nee -
Coexistence of negative photoconductivity and hysteresis in semiconducting graphene2016 / Shendong Zhuang, Yan Chen, Yidong Xia, Nujiang Tang, Xiaoyong Xu, et al.
-
Oxynitride glasses: a review
Abstract Oxynitride glasses are special types of silicates or silicoaluminates which have been the object of many studies over the last forty years. They can be prepared by means of various complex methods, leading to variable levels of nitrogen...
2016 / Àngel R. Garcia, Carolina Clausell, Antonio Barba -
Commentary: The Hash House Harriers and the winding path to materials discovery2015 / Paul C. Canfield
-
A study on phase transformation of monocrystalline silicon due to ultra-precision polishing by molecular dynamics simulation2012 / Lin Zhang, Hongwei Zhao, Zhichao Ma, Hu Huang, Chengli Shi, et al.
-
Combination of dynamic transformation and dynamic recrystallization for realizing ultrafine-grained steels with superior mechanical properties2016 / Lijia Zhao, Nokeun Park, Yanzhong Tian, Akinobu Shibata, Nobuhiro Tsuji
-
Protocols for the Fabrication, Characterization, and Optimization of n-Type Thermoelectric Ceramic Oxides2016 / R. Boston, W. L. Schmidt, G. D. Lewin, A. C. Iyasara, Z. Lu, et al.
-
Dislocation “Bubble-Like-Effect” and the Ambient Temperature Super-plastic Elongation of Body-centred Cubic Single Crystalline Molybdenum2016 / Yan Lu, Sisi Xiang, Lirong Xiao, Lihua Wang, Qingsong Deng, et al.
-
Deformation Microstructure and Deformation-Induced Martensite in Austenitic Fe-Cr-Ni Alloys Depending on Stacking Fault Energy2016 / Ye Tian, Oleg I. Gorbatov, Annika Borgenstam, Andrei V. Ruban, Peter Hedström
-
Finite Element Simulation of Magnesium Alloy AZ31 Tube Bending2016 / Wenyun Wu, Lv Xiao, Donghong Wang
-
Bimetal-gradient-layer surfacing of forging die manufacturing based on cast-steel substrate2015 / Jiansheng Zhang, Jie Zhou, Fei Gao, Zhu Su, Shun Lu
-
Influence of Fe-Zn intermetallic layer on corrosion behaviour of galvanized concrete reinforcement2016 / P. Pokorný
-
First-principles investigation on elastic and thermodynamic properties of Pnnm-CN under high pressure2016 / Zhao Ya-Ru, Zhang Hai-Rong, Zhang Gang-Tai, Wei Qun, Yuan Yu-Quan