Materials engineering topic list of research papers
-
Cast Iron And Mineral Cast Applied For Machine Tool Bed - Dynamic Behavior Analysis2015 / N. Kępczak, W. Pawłowski, Ł. Kaczmarek
-
Effects of Parameters on the Setting Time of Fly Ash Based Geopolymers Using Taguchi Method
Abstract Geopolymers are the inorganic polymer materials possessing properties superior than the properties of conventional materials. Geopolymers are also environment friendly materials. This paper determines the effects of parameters such as...
2016 / Ahmer Ali Siyal, Khairun Azizi Azizli, Zakaria Man, Hafeez Ullah -
Raman spectroscopy and microwave dielectric properties of Sn substituted SrLa4Ti5O17 ceramics2016 / Abdul Manan, Atta Ullah, Arbab Safeer Ahmad
-
High Spatial Resolution Evaluation of Residual Stresses in Shot Peened Specimens Containing Sharp and Blunt Notches by Micro-hole Drilling, Micro-slot Cutting and Micro-X-ray Diffraction Methods2016 / B. Winiarski, M. Benedetti, V. Fontanari, M. Allahkarami, J. C. Hanan, et al.
-
Electricity generation comparison of food waste-based bioenergy with wind and solar powers: A mini review
Abstract The food waste treatment-based anaerobic digestion has been proven to play a primary role in electricity industry with high potentially economic benefits, which could reduce electricity prices in comparison with other renewable energy...
2016 / Ngoc Bao Dung Thi, Chiu-Yue Lin, Gopalakrishnan Kumar -
Life-Cycle-Oriented Product-Service-Systems in the Tool and Die Making Industry
Abstract The tool and die making industry from Western Europe, characterized by single and small series production, faces increasing global competition with low-wage countries. Challenges are the increasing product-derivatization, shorter product...
2016 / Günther Schuh, Michael Salmen, Thomas Kuhlmann, Jan Wiese -
Microstructure and Mechanical Properties of Similar and Dissimilar Joints of Aluminium Alloy and Pure Copper by Friction Stir Welding
Summary In the present study, the microstructure and mechanical properties of similar and dissimilar friction stir welded joints of aluminium alloy (AlA) and pure copper (Cu) were evaluated at variable tool rotational speeds from 150 to 900rpm in...
2016 / V.C. Sinha, S. Kundu, S. Chatterjee -
Superlattice effect for enhanced fracture toughness of hard coatings
Abstract Coherently grown nanolayered TiN/CrN thin films exhibit a superlattice effect in fracture toughness, similar to the reported effect in indentation hardness. We found –by employing in-situ micromechanical cantilever bending tests on...
2016 / R. Hahn, M. Bartosik, R. Soler, C. Kirchlechner, G. Dehm, et al. -
Additive Manufacturing for Enhanced Performance of Molds
Abstract Additive manufactured conformal cooling channels has proved beneficial for molds used for casting. These casting tools often endure cyclic thermal influences that lead to thermal fatigue. To increase the structural resistance to thermal...
2016 / Vegard Brøtan, Olav Åsebø Berg, Knut Sørby -
Cyclic fatigue behavior of nickel–titanium dental rotary files in clinical simulated root canals
Background/purpose Dental rotary instruments can be applied in multiple conditions of canals, but unpredictable fatigue fracture may happen. This study evaluated the fatigue lives of two batches of nickel–titanium (NiTi) dental rotary files...
2016 / Chih-Wen Chi, Chun-Chieh Li, Chun-Pin Lin, Chow-Shing Shin -
Growth Law For Peritectic Phases Formation In The Zinc Coating2015 / E. Guzik, D. Kopyciński, W. Wołczyński
-
Stress-Induced Anisotropy and Stress Dependence of Saturation Magnetostriction in the Jiles-Atherton-Sablik Model of the Magnetoelastic Villari Effect2016 / R. Szewczyk
-
Impact of defect occupation on conduction in amorphous Ge2Sb2Te52016 / Matthias Kaes, Martin Salinga
-
Corrosion Resistance of The Bearing Steel 67SiMnCr6-6-4 with Nanobainitic Structure2015 / E. Skołek, K. Dudzińska, J. Kamiński, W.A. Świątnicki
-
Crack propagation behavior in planet gears
Abstract Aim of this work is to investigate crack propagation paths in planet gears for aerospace applications in order to find how gears parameters may affect the crack path and, consequently, may provide information about gears design to avoid...
2016 / Francesca Curà, Andrea Mura, Carlo Rosso -
Springback analysis of AA5754 after hot stamping: experiments and FE modelling2016 / Ailing Wang, Kai Zhong, Omer El Fakir, Jun Liu, Chaoyang Sun, et al.
-
Review on the elaboration and characterization of ceramics refractories based on magnesite and dolomite
Abstract One of the most important elements of furnaces, boilers and other heating units is the structure (lining), usually made of silica–alumina, basic or special refractories. The basic refractories are materials that are increasingly in demand...
2016 / Chaouki Sadik, Omar Moudden, Abdselam El Bouari, Iz-Eddine El Amrani -
Imaging in 3D under pressure: a decade of high-pressure X-ray microtomography development at GSECARS2016 / Tony Yu, Yanbin Wang, Mark L. Rivers
-
Evaluation of corrosion on the fuel performance of stainless steel cladding2016 / Daniel de Souza Gomes, Alfredo Abe, Antonio Teixeira e Silva, Claudia Giovedi, Marcelo Ramos Martins
-
Modeling and Simulation of a Piezoelectric Vibration Energy Harvester
Abstract The paper presents a lumped parameter model of a vibration energy harvester consisting of a bimorph piezoelectric cantilever with end mass. Stress on the piezoelectric material which is primarily accountable for the generation of electrical ...
2016 / Sushanta Kundu, Harshal B. Nemade