Materials engineering topic list of research papers
-
Conceptual Design of a Pick-and-Place 3D Nanoprinter for Materials Synthesis2016 / Max B. Carlson, Kayen K. Yau, Robert E. Simpson, Michael P. Short
-
When epitaxy meets plasma: a path to ordered nanosheets arrays2013 / Hao Zhuang, Lei Zhang, Regina Fuchs, Thorsten Staedler, Xin Jiang
-
Nitric Oxide Formation in H2/CO Syngas Non-premixed Jet Flames
Abstract Direct numerical simulations (DNS) of high hydrogen content (HHC) syngas nonpremixed jet flames have been carried out to study the nitric oxide (NO) formation. The detailed chemistry employed is the GRI 3.0 updated with the influence of the ...
2015 / K.K.J. Ranga Dinesh, E.S. Richardson, J.A. van Oijen, K.H. Luo, X. Jiang -
Terapascal static pressure generation with ultrahigh yield strength nanodiamond2016 / N. Dubrovinskaia, L. Dubrovinsky, N. A. Solopova, A. Abakumov, S. Turner, et al.
-
Role of Ontologies for CPS Implementation in Manufacturing2016 / Marco Garetti, Luca Fumagalli, Elisa Negri
-
Site preference and electronic structure of Mn2RhZ (Z = Al, Ga, In, Si, Ge, Sn, Sb): a theoretical study2016 / Zhi Ren, Yang Liu, Songtao Li, Xiaohong Zhang, Heyan Liu
-
Qualitative Governing Approach of a Spark Ignition Engine Using Exhaust Gas Recirculation
Abstract A qualitative governing approach of a Spark Ignition (SI) engine incorporating Exhaust Gas Recirculation (EGR) was studied using AVL Boost. SI engines being quantitatively governed by controlling the quantity of charge inducted, leading to...
2015 / Atul Gupta, Ramzy Abdel-Gayed -
Krill herd algorithm applied to short-term hydrothermal scheduling problem
Abstract In this paper, krill herd algorithm (KHA) technique is employed to solve the short-term hydrothermal scheduling (HTS) problem. In this article, the potentialities of DE are used in KHA technique to improve the convergence speed and...
2015 / Provas Kumar Roy, Moumita Pradhan, Tandra Paul -
Investigation Of Sound Absorption Properties Of Bark Cloth Nonwoven Fabric And Composites2015 / Samson Rwawiire, Blanka Tomkova, Eulalia Gliscinska, Izabella Krucinska, Marina Michalak, et al.
-
Design Proposal of an Adjustable Workstation for Very Short and Very Tall People
Abstract This research presents a design proposal for extremes where men and women perform similar tasks in the same workstations. Within assembly lines hydraulic presses that allow to be adjusted to different heights are used. However, at the...
2015 / Juan Luis Hernandez-Arellano, J. Nieves Serratos-Perez, Ariel de la Torre, Aide Aracely Maldonado-Macias, Jorge Luis Garcia-Alcaraz -
Effect of the Catalytic Pyrolysis Conditions on the Properties of Biological Coke
Abstract An orthogonal experiment was used to investigate the effects of cotton stalk catalytic pyrolysis conditions on the properties of biological coke. The Fourier transform infrared spectroscopy (FTIR) coupled with scanning electron microcopy...
2015 / Ma Peiyong, Sun Yadong, Xing Xianjun, Li Hui, Li Tao, et al. -
A fiber-based bunch of flowers2015 / Emanuela Tamburri, Patrizio Barbini, Silvia Orlanducci, Maria Letizia Terranova
-
High pressure die casting of Fe-based metallic glass2016 / Parthiban Ramasamy, Attila Szabo, Stefan Borzel, Jürgen Eckert, Mihai Stoica, et al.
-
A Numerical Investigation on Characteristics of Turbulent Premixed Flame in Porous Media
Abstract A numerical study on the turbulent combustion in porous media is conducted based on 2D staggered cylinders using the eddy dissipation concept model (EDC) with emphasis on characteristics of the turbulent premixed flame. The results show...
2015 / Zhong-Shan Chen, Mao-Zhao Xie, Hong-Sheng Liu, Meng Yue -
Reversible logic gate using adiabatic superconducting devices2014 / N. Takeuchi, Y. Yamanashi, N. Yoshikawa
-
Multi-objective optimization of functionally graded thickness tubes under external inversion over circular dies2016 / Omid Mohammadiha, Hashem Ghariblu
-
c-axis preferential orientation of hydroxyapatite accounts for the high wear resistance of the teeth of black carp (Mylopharyngodon piceus)2016 / Jimin Fu, Chong He, Biao Xia, Yan Li, Qiong Feng, et al.
-
Self-organization in precipitation reactions far from the equilibrium2016 / E. Nakouzi, O. Steinbock
-
Computational design of mould sprue for injection moulding thermoplastics
Abstract To injection mould polymers, designing mould is a key task involving several critical decisions with direct implications to yield quality, productivity and frugality. One prominent decision among them is specifying sprue-bush conduit...
2015 / Muralidhar Lakkanna, G.C. Mohan Kumar, Ravikiran Kadoli -
A novel approach to predict surface roughness in machining operations using fuzzy set theory
Abstract The increase of consumer needs for quality metal cutting related products with more precise tolerances and better product surface roughness has driven the metal cutting industry to continuously improve quality control of metal cutting...
2015 / Tzu-Liang (Bill) Tseng, Udayvarun Konada, Yongjin (James) Kwon