Civil engineering topic list of research papers
-
Experimental study on heating characteristics and control strategies of ground source heat pump and radiant floor heating system in an office building
Abstract In building energy consumption, the proportion of heating in energy consumption is very large. From the point of view of energy saving and thermal comfort, radiant floor heating system needs to be popularized and applied. This study takes...
2017 / Linhua Zhang, Xiaokai Huang, Li Liang, Jiying Liu -
Dynamics of Process, Algorithm, and System of Uninterrupted Action Loading Machine Feeding
Abstract Based on studying the peculiarities of dynamics of working processes of mining loading machines of uninterrupted action the article substantiates the principal and a corresponding method of automated control of the feed to the pile...
2017 / G.S. Khazanovich, A.V. Otrokov, V.G. Chernyh -
Application of the Laws of Mechanics of Granulated Solidsin Studies to Loader Bucket Interaction with Bulk Material Stack
Abstract Today the industrial complex needs sophisticated machines to perform loading operations. In the mechanized loading theory, one of the approaches to the description of the interaction processes between the bucket working bodies and the...
2017 / Yu.M. Lyashenko, E.A. Revyakina, D.N. Shurygin -
Review of Experimental Studies of Cold-Formed Steel Channels with Slotted Webs under Bending
Abstract The paper presents a review of experimental studies of cold-formed steel channels with perforated webs under bending. In the experimental studies five channels were tested under four-point bending and two channels were subject to a...
2017 / N.V. Degtyareva -
Improving Indoor Air Humidity in Heated Rooms based on Natural Evaporation of Water from Wetted Textile Fabric - A Pilot Study
Abstract Indoor air humidity (IAH) is one of the most important factors in the determination of in-door environmental conditions and thermal comfort. However, during the heating period in cold climates it has been reported that indoor relative...
2017 / Guangtao Fan, Jingchao Xie, Hong Yang, Jiaping Liu -
Thickness of Building External Insulation in Chongqing Based on Intermittent Heating Supply
Abstract It is a hot topic whether the choice of heating supply is necessary and what is the most suitable form of heating system for hot summer and cold winter regions. Apparently, the difference of climate and building envelope makes it a complex...
2017 / Yuchen Wang, Mohamad Iskandar Jobli, Caidan Zheng, Xiaokun Yang, Ketong Li -
A review of experimental results of steel reinforced recycled aggregate concrete members and structures in China (2010-2016)
Abstract A series of investigations on the structural performance of Steel Reinforced Concrete (SRC) members and frame structures realized employing Recycled Aggregate Concrete (RAC) have been performed in China from 2010 to 2016. The research...
2017 / Jinjun Xu, Zongping Chen, Jianyang Xue, Yuliang Chen, Zuqiang Liu -
Problems in reconstruction projects, BIM uses and decision-making: Lithuanian case studies
Abstract The research deals with reconstruction projects investigation by applying statistical analysis and multiple criteria decision-making method, also research on application of Building Information Modelling (BIM) methodology for reconstruction ...
2017 / Miroslavas Pavlovskis, Darius Migilinskas, Jurgita Antuchevičienė, Irina Urba, Viačeslav Zigmund -
Performance of T-Shaped Steel Reinforced Concrete Column under High Temperature
Abstract With high strength and good seismic performance, T-shaped steel reinforced concrete column is widely used in high-rise building structure. Three T-shaped steel reinforced concrete columns were tested under high temperature and vertical...
2017 / Yuzhuo Wang, Ying Huang, Chuanguo Fu -
Predictive Reliability Assessment of Loading and Transport Modules of Tunneling Equipment during Construction of Road Tunnels
Abstract Designs of loading and transport modules applied for the construction of road tunnels are considered. The distinctive feature of modules from conventional designs is the use of wedge working elements in combination with power hydraulic...
2017 / A. Nosenko, A. Domnitskiy, E. Shemshura -
Study on estimation of compressive strength of concrete in structure using ultrasonic method2018 / Satoshi Watanabe, Kazumi Hishikawa, Kengo Kamae, Satoru Namiki
-
Substantiation of Hydraulic System for Weighing Freights Transported with Dump Trucks
Abstract The paper considers the solution of a problem of number of the moving connected with weighing of freights, reduction, consisting in development of the device for determination of the freight mass mounted directly on the dump truck. The...
2017 / M.S. Dmitriyev, M.L. Khasanova, A.V. Raznoshinskaya -
Analysis of load characteristics and responses of low-rise building under tornado
Abstract In this paper, the numerical model of the tornado generator is established by using the computational fluid dynamics (CFD) method. The radar observed wind profiles of Spencer tornado (1998) are used as inlet boundary condition to form...
2017 / Feng Xu, Jie Ma, Wen-li Chen, Yi-qing Xiao, Zhong-dong Duan -
Improving Natural Ventilation Performance in a High-Density Urban District: A Building Morphology Method
Abstract The urban expansion of Dalian city by a high-density downtown morphological pattern cause the wind speed per year trended downward. Therefore improving urban ventilation performance is becoming more important for urban planners. To evaluate ...
2017 / Fei Guo, Peisheng Zhu, Shiyuan Wang, Dongwen Duan, Yun Jin -
Modeling Optimal Path of Touch Sensor of Coordinate Measuring Machine Based on Traveling Salesman Problem Solution
Abstract The article justifies the necessity of reducing the measurement time of the part surfaces in the coordinate measuring machine by minimizing the trajectory of the sensor. It is established that the search of the minimal path by the sensor...
2017 / O.V. Zakharov, A.F. Balaev, A.V. Kochetkov -
Improving the effectiveness of FMEA analysis in automotive – a case study2016 / Gábor Ványi
-
Volume design of the heat storage tank of solar assisted water-source heat pump space heating system
Abstract The paper presents a method to design the volume of the heat storage tank of the solar assisted water-source heat pump space heating (SAWHPSH) system. With the area of the solar thermal collector calculated according to the China national...
2017 / Xiaodong Guo, Haiwen Shu, Jin Gao, Fei Xu, Chen Cheng, et al. -
Development of the applied approach to analysis of beam-columns
Abstract The known approximate formula for calculating bending moment in statically determinate elastic rod under bending and compression is generalized to the case of a statically indeterminate one loaded with a compressive force distributed along...
2017 / L.M. Kagan-Rosenzweig -
Study on the Measurement of Indoor Environment Quality and Enclosure Structure Thermal Defects of Green Residential Buildings in Severe Cold Areas
Abstract In order to understand the actual effect of green residential building in the running stage, In this paper, a residential building project with a green certification in a cold area is selected as the measured object, through two aspects of...
2017 / Liang Yu, Haixu Wang, Xiaotong Wang, Guohui Feng -
Turbine Blades Profile and Surface Roughness Measurement
Abstract The article presents the study of a turbine blade profile and roughness measurement processes - the task every manufacturer of this part needs to resolve. The blade is one of the most complex parts to manufacture because of its complex...
2017 / S. Egorov, A. Kapitanov, D. Loktev