Civil engineering topic list of research papers
-
Punching Behaviour of Reinforced Concrete Footings at Testing and According to Eurocode 2 and fib Model Code 20102017 / Zoran Bonić, Nebojša Davidović, Todor Vacev, Nikola Romić, Elefterija Zlatanović, et al.
-
Daylighting on the working plane in oriented attic rooms under overcast and clear sky2014 / Kristián Kondáš, Stanislav Darula
-
Investigating Schedule Deviation in Construction Projects through Root Cause Analysis
Abstract In construction projects delays are not only disruptive but also expensive. Thus, the reasons for schedule deviation need to be identified. The delay factors determined in previous research were predominantly studied through surveys. In...
2017 / Pei-Yuan Hsu, Marco Aurisicchio, Panagiotis Angeloudis -
Initial probabilistic studies into a deflection-based design format for concrete floors exposed to fire
Abstract Performance Based Design is increasingly applied in structural fire engineering, sometimes entailing the use of deflection-based criteria to demonstrate adequate performance. Since no deflection-based design format currently exists which...
2017 / Ruben Van Coile, Luke Bisby -
Automation of Engineering Preparation of Volumetric Hydraulic Actuator Production in a Small Company
Abstract The process of specialized modules creation is considered; they implement an automated design of hydraulic stations, hydraulic lift jacks, and the preparation of production order blank. All the components included in the hydraulic lifting...
2017 / A.V. Averchenkov, E.A. Leonov, D.V. Orekhov -
An Occupational Profile of People Injured in Accidents at Work in the Polish Construction Industry
Abstract The construction industry in Poland and in the world is characterized by a high level of threat to the life and health of workers. In accident processes, a man exists in a triple role, namely: a decision maker, a perpetrator of an accident...
2017 / Bożena Hoła, Mariusz Szóstak -
Identification of Soil Excavation Operating Zone of Excavator Equipped with Backhoe Attachment
Abstract The article describes the method, procedure and software applications of Mathcad Software System used to determine an operating zone of soil excavation of the excavator equipped with backhoe attachment. The operating digging zone is one of...
2017 / Ye. Kudryavtsev -
Analytical solution of elastic fields induced by a 2D inclusion of arbitrary polygonal shape
Abstract We generalize a recent application of the equivalent inclusion method, Jin et al. (2011), to derive the elastic field induced by a constant eigenstrain applied to an elliptic inclusion whose boundary is approximated by a polygon, the number ...
2017 / Giulio Zuccaro, Salvatore Trotta, Salvatore Sessa, Francesco Marmo, Luciano Rosati -
Stability Analysis of Orthotropic Plates By The Form Factor Interpolation Method
Abstract The article deals with the stability analysis of rectangular elastic orthotropic plates, which are simply supported on the contour and affected by axial load. We propose the form factor interpolation method to solve this problem. This...
2017 / V.I. Korobko, S.Yu. Savin, I.A. Ivlev -
Perspective Schemes Equipment Ultra-deep Shafts
Abstract When equipped with deep shafts to the sinking of the most difficult technical task is the organization of the recovery tunnel. It is solved in the preparatory period of construction of the mining enterprise. The duration of it depends on...
2017 / F. Yagodkin, M. Pleshko, A. Prokopov -
Innovative solutions in engineering of construction projects
Abstract The issue of innovation in engineering of construction projects (ECP) is considered. The nature of the ECP and the issue of application of innovations is multidimensional, therefore the problem ought to considered in vertical and horizontal ...
2017 / Anna Sobotka -
Axial compression behavior of reinforced geopolymer concrete columns with demolished concrete lumps
Abstract This paper presents results of an experimental study on the axial compression behavior of reinforced geopolymer concrete columns with demolished concrete lumps (DCLs). A total of 22 reinforced concrete short columns were tested under axial...
2017 / Zhi-Jian Zhang, Hai-Yan Zhang, Jun-Hong Zheng, Kai-Hang Lin, Yi Su -
Experimental Research on the Temperature Distribution of Natural Displacement Ventilation in the Room under the Influence of Wind Pressure and Air Supply
Abstract Air pollution and building energy efficiency are two hot research contents at present. Based on the comfort, energy-saving and environmental protection characteristics of natural displacement ventilation, an experiment was been conducted to ...
2017 / Zeqin Liu, Shuang Cai, Size Li -
Community load prediction: methodology and a case study
Abstract As an important part of green eco-community planning, reasonable community energy planning requires accurate community load prediction. Hence, this paper focuses on the method of community load prediction. Given that community energy...
2017 / Lei Xu, Yiqun Pan, Meishun Lin, Zhizhong Huang -
Analysis of influence of mechanical boundary conditions on zero point shift of Coriolis flowmeter
Abstract Coriolis flow meters determine mass flow rate by measuring the phase shift of the signal pick-up coils. Therefore, changes in the phase shift amount not related to the flow of the measured medium cause mass flow measurement errors. The...
2017 / A.A. Yaushev, P.A. Taranenko, V.A. Loginovskiy -
Effects of lime addition on geotechnical properties of sedimentary soil in Curitiba, Brazil
Abstract The soil of the Guabirotuba geological formation (Paraná Basin, Brazil) has physico-mechanical properties which are not suitable for its utilization in pavement construction, in protection of hillsides and slopes, or as shallow foundation...
2017 / Jair A. Baldovino, Eclesielter B. Moreira, Wagner Teixeira, Ronaldo L.S. Izzo, Juliana L. Rose -
Plate Finite Element with Physical Shape Functions: Correctness of the Formulation2018 / W. Gilewski, M. Sitek
-
Calculation of Concrete Strength in Winter Conditions Based on Heat Exchange Processes Modeling
Abstract The article deals with the problem of using a mathematical model of the three-dimensional non-stationary temperature field to calculate the strength of concrete, the hardening in winter conditions. There is data on the developed...
2017 / A.A. Melnik -
Parametric Diagnostic State of Gas Turbine Power Plant
Abstract The method of the parametric diagnostic state of the gas turbine power plant (GTPP) used to power aircraft and ground targets with compressed air, constant, and variable electrical power. The method is based on the identification...
2017 / A.S. Gishvarov, J.C. Raherinjatovo -
Probabilistic Modeling of Tracked Vehicle Mover And Ground Interaction
Abstract The article is devoted to ensuring the strength reliability of the tracked vehicle running gear. The method of estimation of track link fatigue life is proposed. The technique is based on the method of resource modeling at the design stage...
2017 / I.I. Berezin, A.A. Abyzov