Mechanical engineering topic list of research papers
-
Fault Diagnosis System of Rotating Machinery Vibration Signal
Abstract A high demand has been presented in the measuring and diagnosis of vibration signal of rotating machinery, which can reflect the running state information of rotating machinery equipment. This paper designs a new type of fault diagnosis...
2011 / Lei You, Jun Hu, Fang Fang, Lintao Duan -
A Case Study on Reuse of Manufacturing Knowledge - Comparing Defense Practices with Automotive & Aerospace Practices
Abstract In product development, one critical source of knowledge is experience made in the manufacturing phase of a products lifecycle. Hence, the collaborative interaction between design and manufacturing is explored. Results from a descriptive...
2012 / L. Krogstie, P. Andersson -
The static friction torque compensation of SPG by single resonance pulse
Abstract Aiming to attenuate the fluctuation caused by static friction torque of the SPG, the dissipation energy produced by the slip distance from the static friction to the lubrication is analyzed based on the Hertz Contact Theory. Considering the ...
2011 / YANG Jian-Guo, ZHOU Ren-kui, LIU Zhao-hui, LIANG Dong-sheng -
Modelling and Co-simulation Based on AMESim and Simulink for Light Passenger Car with Dual State CVT
Abstract Co-simulation platform was constructed using MATLAB/Simulink and AMESim for light passenger car with dual state CVT. The vehicle dynamic model, hydraulic system and controller model were established based on the cosimulation platform....
2011 / F. Xie, J. Wang, Y. Wanga -
Low Speed Automation, a French Initiative
Abstract Nowadays, vehicle safety is constantly increasing thanks to the improvement of vehicle passive and active safety. However, on a daily usage of the car, traffic jams remains a problem. With limited space for road infrastructure, automation...
2012 / Glaser Sébastien, Cour Maurice, Nouveliere Lydie, Lambert Alain, Nashashibi Fawzi, et al. -
Impact vibration reduction for flexible manipulators via controllable local degrees of freedom
Abstract When performing operation tasks, the interaction between a flexible manipulator and a grasped object usually results in an impact. In this paper, a new way is suggested to alleviate impact vibration of a flexible manipulator via its...
2013 / Yushu Bian, Zhihui Gao, Yuchun Deng -
Multi-fidelity design optimization of transonic airfoils using shape-preserving response prediction
Abstract A computationally efficient methodology for transonic airfoil design optimization is presented. Our approach exploits a corrected physics-based low-fidelity surrogate that replaces, in the optimization process, an accurate but...
2010 / Leifur Leifsson, Slawomir Koziel -
A Survey of Modeling and Control of Piezoelectric Actuators2013 / Jingyang Peng, Xiongbiao Chen
-
Research on modeling of heat source for electron beam welding fusion-solidification zone
Abstract In this paper, the common heat source model of point and linear heat source in the numerical simulation of electron beam welding (EBW) were summarized and introduced. The combined point-linear heat source model was brought forward and to...
2013 / Yajun Wang, Pengfei Fu, Yongjun Guan, Zhijun Lu, Yintao Wei -
Optimization of Dry EDM Milling Process
Abstract Electrodischarge machining in gaseous media is one of the fastest growing branches among institutions involved in the research and development of EDM as green manufacturing process. The paper presents results of the studies in the area of...
2013 / G. Skrabalak, J. Kozak, M. Zybura -
Transient performance and intelligent combination control of a novel spray cooling loop system
Abstract Effective thermal control systems are essential for the reliable working of insulated gate bipolar transistors (IGBTs) in many applications. A novel spray cooling loop system with integrated sintered porous copper wick (SCLS-SPC) is...
2013 / Jin Wang, Yunze Li, Jun Wang -
Thermoeconomic Analysis of a One-Pressure Level Heat Recovery Steam Generator Considering Real Steam Turbine Cost
Abstract Nowadays, gradual depletion of fossil fuels associated with emissions constraints due to greenhouse gases, leads to reuse wasted heat from power plant in order to increase the global efficiency. One of the implemented technologies for...
2015 / Carlo Carcasci, Beniamino Pacifici, Lorenzo Winchler, Lorenzo Cosi, Riccardo Ferraro -
Modeling of radiative properties of an Oxyfuel atmosphere with a weighted sum of gray gases for variable carbon dioxide and water vapor concentrations
Abstract The partial pressure of carbon dioxide in the flue gas of an Oxyfuel combustion process is significantly increased in comparison with conventional air-blown firing. Depending on the moisture content of the fuel and the type of flue gas...
2011 / Sebastian Rehfeldt, Christian Kuhr, Martin Ehmann, Christian Bergins -
Results of initial operation of the Jupiter Oxygen Corporation oxy- fuel 15 MWth burner test facility
Abstract Jupiter Oxygen Corporation (JOC), in cooperation with the National Energy Technology Laboratory (NETL), constructed a 15 MWth oxy-fuel burner test facility with Integrated Pollutant Removal (IPRTM) to test high flame temperature oxy-fuel...
2009 / Thomas Ochs, Danylo Oryshchyn, Rigel Woodside, Cathy Summers, Brian Patrick, et al. -
Rayleigh's, Stoneley's, and Scholte's Interface Waves in Elastic Models Using a Boundary Element Method2012 / Esteban Flores-Mendez, Manuel Carbajal-Romero, Norberto Flores-Guzmán, Ricardo Sánchez-Martínez, Alejandro Rodríguez-Castellanos
-
Minimum Detectable Air Velocity by Thermal Flow Sensors2013 / Safir Issa, Walter Lang
-
Surface Acoustic Wave (SAW) Vibration Sensors2011 / Jerzy Filipiak, Lech Solarz, Grzegorz Steczko
-
Optically Defined Modal Sensors Incorporating Spiropyran-Doped Liquid Crystals with Piezoelectric Sensors2011 / Kuan-Ting Chen, Chin-Kai Chang, Hui-Lung Kuo, Chih-Kung Lee
-
Modeling of Beams’ Multiple-Contact Mode with an Application in the Design of a High-g Threshold Microaccelerometer2011 / Kai Li, Wenyuan Chen, Weiping Zhang
-
NURBS-Based Isogeometric Analysis of Beams and Plates Using High Order Shear Deformation Theory2013 / Xinkang Li, Jifa Zhang, Yao Zheng