Mechanical engineering topic list of research papers
-
Electric Hydraulic Accelerator Control Device In AMT
Abstract In order to regulate the fuel injection quantity for the non electronic-controlled engine during the process of automatic shift, independent accelerator auxiliary control device need to be designed .The accelerator control device should not ...
2011 / Yinong Zhao, Jiabao Chen -
Thermoelastic symmetric and antisymmetric wave modes with trigonometric functions in laminated plates2014 / Kishori Lal Verma
-
Application of the Entropy Weight and TOPSIS Method in Safety Evaluation of Coal Mines
Abstract In this paper, evaluation index system of coal mine safety is established on the basis of the SMART principles. Weights of indexes are determined by means of entropy weight method. Safety conditions in four coal mines are applied by used of ...
2011 / Xiangxin Li, Kongsen Wang, Liwen Liu, Jing Xin, Hongrui Yang, et al. -
A Model of Complexity Measurement for Emergency Decision Support System
Abstract Emergency decision-making is the core of emergency management, and directly determines success or failure of emergency disposal activities. This paper introduced the information entropy in the complexity theory. With the combination of...
2012 / Yunhua Wang, Shihong Chen, Huiyan Ke -
Evolutionary Mechanism of Self-organization of University Core Competence Construction Engineering System
Abstract There is an important transition from analytical paradigm to systematic engineering paradigm in the method of research on university core competence. As a new trend of system engineering theory, self-organization theory focuses on the study ...
2012 / Zhang Fusong, Diao Zhaofeng -
Generalized Extended State Observer Approach to Robust Tracking Control for Wheeled Mobile Robot with Skidding and Slipping2013 / Hyo-Seok Kang, Yong-Tae Kim, Chang-Ho Hyun, Mignon Park
-
Analytical solution of electrically conducted rotating flow of a second grade fluid over a shrinking surface
Abstract The steady two-dimensional MHD rotating flow of a second grade past a porous shrinking surface is investigated. The governing system of partial differential equations is transformed into ordinary differential equations, which are then...
2011 / Naeem Faraz, Yasir Khan -
Visualization of coherent structures in a supersonic flat-plate boundary layer2011 / Lin He, ShiHe Yi, YuXin Zhao, LiFeng Tian, Zhi Chen
-
Optimal Maintenance Policy for a System Suffered Damage in Discrete Time Process
Abstract Consider a system that should be continuously operating over an indefinitely long operation cycle n (…=,2,1n), where each operation causes a random amount of damage to the system, and these damages are accumulated with the current damage....
2011 / Yu-Hung Chien, Jih-An Chen -
Pose Accuracy Calibration of a Serial Five DOF Robot
Abstract Robot is widely used in industrial domain and pose accuracy of end-effector is an important indicator for judging robot performance. Calibration is a necessary for operating industrial robot and an effective and efficient means of accuracy...
2012 / Jian Yin, Yu Gao -
The Torque Characteristic Analysis and Simulation on Electromagnetic Gears
Abstract This paper analyzes the effect of air-gap changes, loading currents, claw-pole and angle between driving wheel and driven wheel on electro-magnetic gears torque. ANSYS simulation result shows: torque decreases geometrically with the...
2012 / Jianna Huang, Di Wang, Dabin Zhang -
Ecological performance optimization of a thermoacoustic cooler
Abstract The ecological performance optimization of a generalized irreversible thermoacoustic cooler with heat resistance, heat leakage, thermal relaxation and internal dissipation, in which heat transfer between the working fluid and heat...
2010 / Xuxian Kan, Feng Wu, Xiaoqing Zhang, Anqing Shu -
Optimal Design of Pipeline Based on the Shortest Path
Abstract Design and operation of long-distance pipeline are complex engineering tasks. Even small improvement in the design of a pipeline system can lead to substantial savings in capital. In this paper, graph theory was used to analyze the problem...
2012 / Fei-xue Chu, Shi-yi Chen -
Effects of Intake Temperature and Excessive Air Coefficient on Combustion Characteristics and Emissions of HCCI Combustion
Abstract The combustion of homogeneous charge compression ignition (HCCI) fuelled with ethanol, methanol and gasoline was achieved on a modified CT2100Q engine by heating the intake air. The effects of intake temperature and mixture concentration on ...
2012 / ZHANG Chun-hua, PAN Jiang-ru, TONG Juan-juan, LI Jing -
Velocity and pressure distributions characteristics of coal slurry in floatation cyclone
Abstract The flowing characteristics of coal slurry in floatation cyclone were investigated on the bases of theoretical calculation of velocity and pressure distributions by Navier-Stokes equation by means of reasonable simplification and...
2009 / Shen Xiao-jun, Chen Qing-ru, Li Shu-yan -
Interface Implementation of Manufacturing Industry Agile Supply Chain Nodes Based on Service Agent
Abstract To achieve the synchronous opetation and control of each node in manufacturing industry supply chain, the autonomous, adaptive, cooperative service agent is adopted to achieve the supply chain agility and reconfigurability. The interaction...
2012 / Wang Ji-Peng, Xiong Jing, Wang Tian-Lin -
Analysis of Two Different Bioadditive in CI Engine
Abstract The discovery of internal combustion engine, successive usage and developments in engine technology led to wide spread utilization of petroleum reserves. Moreover, the combustion of these fuels has unhygienic the environment, and hence in...
2012 / R. Senthilkumar, S. Sivaprakasam -
Automatized Design of the Centrifugal Pumps Setting on the Base of Mathematic Modeling of Fluid Flow
Abstract Setting computer-aided design a centrifugal pump is fulfilled on the basis of mathematical model of fluxion of perfect fluid for an inverse axisymmetric problem and a direct three-dimensional problem in nonstationary statement taking into...
2012 / S. Kostornoy, A. Chaplygin, A. Kostornoy -
Numerical Simulating for Turbulent Heat Transfer of Structural Improved Thermoacoustic Cooler
Abstract In this paper, the structural improved thermoacoustic cooler is discussed using numerical method. Firstly, the heat transfer Mathmatics model of porous medium is setup, and an improved shape of thermoacoustic cooler is designed. The heat...
2012 / Jiangrong Xu, Baoyin Liu, Dianpeng Zhao -
Optimization of Serrated End Mills for Reduced Cutting Energy and Higher Stability
Abstract Although serrated end mills are commonly used in machining industry, the literature on these tools is limited to predictive methods while no work has been reported on selection, design or optimization of serration forms. In this paper,...
2013 / R. Koca, E. Budak