Mechanical engineering topic list of research papers
-
A New Solution for the Compression of a Two-Layer Strip and Its Application to Analysis of Bonding by Rolling2014 / Sergei Alexandrov, Yusof Mustafa
-
Dynamics and Control of a Flexible Solar Sail2014 / Jiafu Liu, Siyuan Rong, Fan Shen, Naigang Cui
-
The Incremental Hybrid Natural Element Method for Elastoplasticity Problems2014 / Yongqi Ma, Yi Dong, Yankai Zhou, Wei Feng
-
Effect of inclination angle on the performance of a kind of vapor chamber2014 / Jinlong Ma, Xing Fu, Run Hu, Xaobing Luo
-
Application of High-order Panel Method in Static Aeroelastic Analysis of Aircraft
Abstract A static aeroelastic analysis method based on the high-order panel method and modal method has been recommended through two examples of a high-aspect-ratio wing and a low-aspect-ratio wing. The subsonic aerodynamic forces of a...
2012 / Yaokun Wang, Zhiqiang Wan, Chao Yang -
Research on Multi-axis CNC Programming in Machining Large Hydraulic Turbine's blades Based on UG
Abstract Researched on the multi-axis CNC Integrated machining method of blade on large Francis turbine based on UG to automatic programming software architecture. Discussed the way to enhance the quality and to promote efficiency of machining .The...
2011 / Linjian Yang, Jinchun Feng -
An Improved Mixed Conjugate Gradient Method
Abstract Conjugate gradient method is an important and efficient method to solve the unconstrained optimization problems, especially for large scale problems. Based on the mixed conjugate gradient method proposed by Jing and Deng [1], we improve the ...
2012 / Wen Jia, Jizhou Zong, Xiaodong Wang -
Computational Model of Greenhouse Gas Emissions of Power Station Boiler Considering Desulphurization
Abstract the problem was that computational model of CO2 emission of the power plant boiler was affected by the gypsum - Limestone Wet Flue Gas Desulphurization computational model was rebulided on burning equation. Using gypsum - Limestone WFGD...
2012 / Hu Wang, Shaohua Li, Fusheng Lai, Bin Wang -
Research on a novel Rotor Structure Switched Reluctance Motor
Abstract The paper proposes a novel switched reluctance motor with improved rotor structure, in which the segment core is embedded in aluminum rotor block in order to increase the mechanical strength and easy manufacturing as well as to improve the...
2012 / Lingquan Zeng, Haiwei Yu -
Numerical simulation for flow characteristics of axial flow hydraulic turbine runner
Abstract The design of runner blade of turbine is done for certain flow velocities and angles but these parameters vary with operating conditions. The experimental testing of turbine model is costly, time consuming and gives performance...
2012 / Vishnu Prasad -
Action of Internal Cnoidal Wave on Pile
Abstract The numerical simulation of flow around the pile acted by the internal cnoidal waves has been made by building two-dimensional numerical wave flume based on FLUENT software. Internal cnoidal waves are generated by push-pedal method and the...
2012 / Cheng You-liang, Guo Fei, Dang Yue -
Laser transmission welding of optical transparent thermoplastics
Abstract Laser transmission welding is a well known joining technology for thermoplastics. As undoped thermoplastics have a low absorption for electro-magnetic radiation with wave lengths from 350nm till 1,400nm absorbers are used for laser...
2011 / M. Devrient, T. Frick, M. Schmidt -
Improving homotopy perturbation method with optimal Lagrange interpolation polynomials
Abstract In this paper, an efficient modification of the homotopy perturbation method by using optimal Lagrange interpolation polynomials is presented. The proposed method is easy to implement and computationally very attractive. This proposed...
2012 / E. Babolian, S.M. Hosseini, M. Heydari -
Offline Force Control and Feedrate Scheduling for Complex Free Form Surfaces in 5-Axis Milling
Abstract An enhanced Force model based Feedrate Scheduling (FFS) technique for rough cutting of parts with complex free form surfaces in 5-axis machining is presented. In order to estimate the cutting forces in complex 5-axis machining an enhanced...
2012 / S. Ehsan Layegh K., Huseyin Erdim, Ismail Lazoglu -
Thermo-mechanical properties of silicon carbide filled chopped glass fiber reinforced epoxy composites2013 / Gaurav Agarwal, Amar Patnaik, Rajesh Sharma
-
On Thermal Structure Optimization of a Power LED Lighting
Abstract In this paper, using APDL language to generate the analysis file the LED lamp heat sink of finite element model is established. The length, width and numbers of the heat sink fins being design variables, the maximum junction temperature of...
2012 / Lui Yi. Bing -
A Trigonometric Shear Deformation Theory for Flexure of Thick Beam
Abstract A trigonometric shear deformation theory for flexure of thick beams, taking into account transverse shear deformation effects, is developed. The number of variables in the present theory is same as that in the first order shear deformation...
2013 / Ajay G. Dahake, Yuwaraj M. Ghugal -
A Review on Skin Suits and Sport Garment Aerodynamics: Guidelines and State of the Art
Abstract The present work describes and compares previous results in the field of garment aerodynamics combined with not published results coming from recent experiments conducted at the Norwegian University of Science and Technology (NTNU). A...
2013 / Luca Oggiano, Len Brownlie, Olga Troynikov, Lars Morten Bardal, Camillan Sæter, et al. -
The Evaluation of the Stress-strain State for the Cylinder Heads of High-powered Diesel Engines using the Multiphysics ANSYS Technology
Abstract The researchers have built a calculation model for comparative assessments of the heat balance, heat and stress-strain state for the head and cylinder liner of forced diesel engine, which model takes into account the redistribution of the...
2015 / V.A. Romanov, E.A. Lazarev, N.A. Khozeniuk -
The Research of Vehicle Plate Recognition Technical Based on BP Neural Network
Abstract In the aspect of character, after analyses of license plate recognition technology home and abroad, we use weighted statistics to make plate in the image in a more prominent position. At the same time, we combine the thick grid feature...
2012 / Zhigang Zhang, Cong Wang