Mechanical engineering topic list of research papers
-
Orthopaedic Rehabilitation Device Actuated with Pneumatic Muscles2014 / Ioana Petre, Andrea Deaconescu, Liliana Rogozea, Tudor Ion Deaconescu
-
Microstructure and Glass Phase of Inorganic Binder Coated on Mold for Thin Casting2012 / Eun-Hee Kim, Geun-Ho Cho, Yeon-Gil Jung, Je-Hyun Lee, Baig-Gyu Choi, et al.
-
Chaotic and dynamic analysis of a flexible rotor supported by ultra short aero-lubricated bearing system
Abstract This paper analyzed the chaotic behaviors and vibration phenomenon of a flexible rotor with different mass and bearing number supported by ultra short aero-lubricated bearing (USAB) system. The hybrid method combined with differential...
2015 / Jui-Ho Chen, Cheng-Chi Wang -
Numerical and Experimental Study of the Sound-Insulating Properties of a Deformable Plate Located between Two Chambers
Abstract The paper deals with the numerical solution of acoustic wave propagation plane problem. Being formed by sound source in a high-pressure chamber, the acoustic wave propagates through a deformable thin plate, which radiates the sound wave in...
2015 / V.N. Paimushin, R.K. Gazizullin, A.A. Sharapov -
PASS: Parking-Lot-Assisted Carpool over Vehicular Ad Hoc Networks2013 / Jinqi Zhu, Yong Feng, Bang Liu
-
Development of a Multitype Wireless Sensor Network for the Large-Scale Structure of the National Stadium in China2013 / Yanbin Shen, Pengcheng Yang, Pengfei Zhang, Yaozhi Luo, Yujia Mei, et al.
-
Ant-Based Swarm Algorithm for Charging Coordination of Electric Vehicles2013 / Shaolun Xu, Donghan Feng, Zheng Yan, Liang Zhang, Naihu Li, et al.
-
Feasibility of Output-Only Modal Identification Using Wireless Sensor Network: A Quantitative Field Experimental Study2012 / Wen-ai Shen, Ying Lei, Liang Hu, Yang Wang
-
Integrated Simulation System for 5-axis Milling Cycles
Abstract Multi axis milling is a promising technology for machining of complex geometries and surfaces. Thanks to the additional rotary axis, it provides flexibility to overcome the accessibility issues. However, the process becomes more complicated ...
2015 / Tunc L. Taner, Sulitka Matej, Kopacka Jan -
Investigation of actuator debonding effects on active control in smart composite laminates2015 / B. Huang, H. S. Kim, G. H. Yoon
-
Vibration Analysis of Randomly Oriented Carbon Nanotube Based on FGM Beam Using Timoshenko Theory2015 / M. A. Rashidifar, D. Ahmadi
-
Convex shaping process simulation during counter-rotating electrochemical machining by using the finite element method
Abstract In counter-rotating electrochemical machining (CRECM), a revolving cathode tool with hollow windows of various shapes is used to fabricate convex structures on a revolving part. During this process, the anode workpiece and the cathode tool...
2015 / Dengyong Wang, Zengwei Zhu, Hongrui Wang, Di Zhu -
Design Strategies of Test Codes for Durability Requirement of Disk Brakes in Truck Application
Abstract Durability requirements for disk brakes in truck application are improved based on the actual customer usage. A second moment reliability index is used to design test codes for the assessment of variable amplitude disk brake fatigue life....
2015 / Bengt Johannesson, Tatiana Smirnova, Staffan Johansson -
Safety Evaluation of Smart Grid based on AHP-Entropy Method
Abstract It has become a realistic choice to develop smart grid actively to meet the electricity demand for load centers, especially in China. In the current period of rapid development, in order to effectively measure the safety level of smart...
2012 / Xie Chuansheng, Dong Dapeng, Hua Shengping, Xu Xin, Chen Yingjie -
Aerodynamic/Stealthy/Structural Multidisciplinary Design Optimization of Unmanned Combat Air Vehicle
Abstract An optimization strategy is proposed to deal with the aerodynamic/stealthy/structural multidisciplinary design optimization (MDO) issue of unmanned combat air vehicle (UCAV). In applying the strategy, the MDO process is divided into two...
2009 / Hu Tianyuan, Yu Xiongqing -
Virtual Reality-based Teleoperation with Robustness Against Modeling Errors
Abstract This article investigates virtual reality (VR)-based teleoperation with robustness against modeling errors. VR technology is an effective way to overcome the large time delay during space robot teleoperation. However, it depends highly on...
2009 / Jiang Zainan, Liu Hong, Wang Jie, Huang Jianbin -
Free Rotating Vaneless Diffuser of Diffuser Diameter Ratio 1.30 with Different Speed Ratios and its Effect on Centrifugal Compressor Performance Improvement
Abstract Free rotating vaneless diffuser is one of the novel methods in the design of radial diffuser for reducing the energy losses associated with diffusion. In the present study, the impeller with a stationary vaneless diffuser of diffuser...
2014 / S. Seralathan, D.G. Roy Chowdhury -
UNISOL – Solar Combistore Evaluation and Optimization
Abstract In the frame of UNISOL project, a test bench was installed to perform tests of a combistore which includes a two-way heat exchanger already submitted to a national patent application. The present work describes the main characteristics of...
2014 / Ricardo Amorim, Jorge Facão, João C. Rodrigues, Maria João Carvalho -
Inflatable Wing Design Parameter Optimization Using Orthogonal Testing and Support Vector Machines
Abstract The robust parameter design method is a traditional approach to robust experimental design that seeks to obtain the optimal combination of factors/levels. To overcome some of the defects of the inflatable wing parameter design method, this...
2012 / Zhifei WANG, Hua WANG -
Hierarchical Evaluation of Environmental Impacts from Manufacturing System and Machine Perspective
Abstract Methods and tools for evaluating energy efficiency of machines and manufacturing lines have become available recently. These are e.g. manufacturing system simulation approaches and detailed machine performance simulation...
2014 / Tim Heinemann, Philipp Schraml, Sebastian Thiede, Christian Eisele, Christoph Herrmann, et al.