Mechanical engineering topic list of research papers
-
Boron Particle Ignition in Secondary Chamber of Ducted Rocket2012 / J. X. Hu, Z. X. Xia, W. H. Zhang, Z. B. Fang, D. Q. Wang, et al.
-
Fiber Bragg Grating Sensor to Monitor Stress Kinetics in Drying Process of Commercial Latex Paints2010 / Ivo de Lourenço, Gustavo R. C. Possetti, Marcia Muller, José L. Fabris
-
Design of a Novel Experimental Facility for Testing of Tidal Arrays2013 / Matevz Pintar, Athanasios Kolios
-
Research on micromanipulator's clamping force sensing based on static wirerope tension of a surgical robot2015 / L. Yu, Z. Wang, W. Wang, H. Li, L. Wang
-
Comparative Study on Combustion and Explosion Characteristics of High Flash Point Jet Fuel
Abstract Jet fuel is a kind of hazardous chemical and it can easily result in combustion or explosion accidents in the process of production, use, storage, transportation and other aspects, so its safety issues are essential and urgent. Explosion...
2014 / LEI Zheng, LU Changbo, AN Gaojun, Xiong Chunhua, Zhou Youjie, et al. -
A Surrogate Measure for Multi-Component Failure Based Reliability Analysis of Water Distribution Systems
Abstract Multi-component failure based reliability analysis of a real-life water distribution system (WDS) is extremely time consuming and computationally demanding. Reliability surrogate measures are novel techniques to lessen the associated...
2014 / A. Gheisi, G. Naser -
Multi-objective thermodynamic optimization of an irreversible regenerative Brayton cycle using evolutionary algorithm and decision making
Abstract Brayton heat engine model is developed in MATLAB simulink environment and thermodynamic optimization based on finite time thermodynamic analysis along with multiple criteria is implemented. The proposed work investigates optimal values of...
2015 / Rajesh Kumar, S.C. Kaushik, Raj Kumar, Ranjana Hans -
Indirect Model Based Estimation of Cutting Force and Tool Tip Vibrational Behavior in Milling Machines by Sensor Fusion
Abstract Real time prediction of cutting tool condition and machined surface finish have been attractive research objectives over the last decades. However, providing practical and reliable solutions is still a demanding task for milling machine...
2015 / M. Salehi, P. Albertelli, M. Goletti, F. Ripamonti, G. Tomasini, et al. -
Sensor Optimization Selection Model Based on Testability Constraint
Abstract Sensor selection and optimization is one of the important parts in design for testability. To address the problems that the traditional sensor optimization selection model does not take the requirements of prognostics and health management...
2012 / Shuming YANG, Jing QIU, Guanjun LIU -
Damage localization for beam structure by moving load2017 / Qiuwei Yang, JK Liu, BX Sun, CF Liang
-
Virtual simulation of maneuvering captive tests for a surface vessel2015 / Ahmad Hajivand, S. Hossein Mousavizadegan
-
Video-based measurement for transverse vibrations of moving catenaries in mine hoist using mean shift tracking2015 / J. Yao, X. Xiao, H. Chang
-
Adaptive Impedance-controlled Manipulator Based on Collision Detection
Abstract This article provides a flexible-joint-manipulator, which incorporates with three means to make its mechanical arm come into compliant contact with the objects with a force kept within an acceptable range. At first, the Cartesian impedance...
2009 / Huang Jianbin, Xie Zongwu, Jin Minghe, Jiang Zainan, Liu Hong -
Solution to Boundary-value Problems in Fabrication of High-precision Reflector Panels
Abstract The fabrication of high-precision panels for the compact antenna test range (CATR) with a sandwich construction of two aluminum skin-plates and one aluminum middle plate, which are bonded to two aluminum honeycomb core-layers poses a lot of ...
2009 / Hao Changling, Zhou Xianbin, Li Xiaoqiang -
Investigation of an Unsteady Flame Propagating in a Curved Duct
Abstract Knowledge of behaviors of flame propagating in a curved duct is of great importance to prevent damage in practical industry. In this study, the premixed propane/air flame propagating through a square cross-section duct with a 90° bend was...
2014 / Xue-chao He, Jin-hua Sun, Guo-jian Lu, R.K.K. Yuen, Yuan-yi Xie -
A Concurrent Design Method for Functional Tolerance and Structure based on the Principle of Decomposition and Reconstitution
Abstract To assure feasibility and economy of mechanical product design, tolerance design should be incorporated into conceptual structure design phase. The completion of the evolving procedures from functional requirement to tolerance scheme...
2013 / Heng Zhang, Yanlong Cao, Yanding Wei, Jiangxin Yang -
Unsteady flow simulations of Pelton turbine at different rotational speeds2015 / M. Choi, Y.-J. Jung, Y. Shin
-
Three dimensional analysis of natural convection and entropy generation in a sharp edged finned cavity
Abstract A computational study has been performed to make a computational analysis of natural convection and entropy generation in a sharp edged finned cavity. Three dimensional analysis has been done by solving governing equations with a written...
2016 / Lioua Kolsi, Hakan F. Oztop, Nidal Abu-Hamdeh, Abdulaziz Alghamdi, M. Naceur Borjini -
Performance Optimisation of Polymeric Collectors by Means of Dynamic Simulation and Sensitivity Analysis
Abstract A dynamic flat-plate collector model for parametric sensitivity studies on polymer-based collector designs was developed. Validation using experimental results of conventional flat-plate collectors showed satisfying results especially...
2014 / Christoph Reiter, Sebastian Brandmayr, Christoph Trinkl, Wilfried Zörner, Victor I. Hanby -
Progress in helicopter infrared signature suppression
Abstract Due to their low-attitude and relatively low-speed fight profiles, helicopters are subjected to serious threats from radio, infrared (IR), visual, and aural detection and tracking. Among these threats, infrared detection and tracking are...
2014 / Jingzhou Zhang, Chengxiong Pan, Yong Shan