Mechanical engineering topic list of research papers
-
Study on Combustion Parameters of Liquefied Petroleum Gas Engine
Abstract In order to improve the power performance of liquefied petroleum gas engine, and the combustion parameters of liquefied petroleum gas engine are studied, and the relations among chemical energy, mechanical energy, and thermal energy during...
2011 / Guoxiang Lu, Lifu Li -
The applied effect analysis of heat exchanger installed in a typical communication base station in Beijing of China
Abstract The high electric power consumption of air conditioning in communication base station needs to be solved urgently. This paper presents a new technology to discharge excess heat from a communication plant by utilizing the heat exchanger when ...
2012 / Lingling Bao, Jinggang Wang, Ligai Kang -
Replication of micro/nano-scale features by micro injection molding with a bulk metallic glass mold insert2012 / N Zhang, J S Chu, C J Byrne, D J Browne, M D Gilchrist
-
The Selection of the Best Control Rule for a Multiple-Load AGV System Using Simulation and Fuzzy MADM in a Flexible Manufacturing System2010 / Parham Azimi, Hasan Haleh, Mehran Alidoost
-
Genetic Algorithm-Based Identification of Fractional-Order Systems2013 / Shengxi Zhou, Junyi Cao, Yangquan Chen
-
Numerical simulation of aerodynamic performance for two dimensional wind turbine airfoils
Abstract The aerodynamic performance of wind turbine airfoils was an important foundation for the aerodynamic design and the performance analysis of the wind turbine. The method of numerical simulation was used in this paper, and the aerodynamic...
2012 / Ji Yao, Weibin Yuan, jianliang Wang, Jianbin Xie, Haipeng Zhou, et al. -
Aircraft-on-ground path following control by dynamical adaptive backstepping
Abstract The necessity of improving the air traffic and reducing the aviation emissions drives to investigate automatic steering for aircraft to effectively roll on the ground. This paper addresses the path following control problem of...
2013 / Bihua Chen, Zongxia Jiao, Shuzhi Sam Ge -
Research on multi-fidelity aerodynamic optimization methods
Abstract Constructing high approximation accuracy surrogate model with lower computational cost has great engineering significance. In this paper, using co-Kriging method, an efficient multi-fidelity surrogate model is constructed based on two...
2013 / Likeng Huang, Zhenghong Gao, Dehu Zhang -
Improvement of Cutting Forces Modeling Based on Oriented Cutting Tests
Abstract Cutting tools with higher wear resistance are those manufactured by powder metallurgy process, which combines the development of materials and design properties, features of shape-making technology and sintering. The annual global market of ...
2013 / Sébastien Campocasso, Jean-Philippe Costes, Guillaume Fromentin, Stéphanie Bissey-Breton, Gérard Poulachon -
An evaluation of swimsuit performance
Abstract Hydrodynamics plays an important role in swimming. Recently, swimsuits have been aggressively marketed, principally as a means for reducing the skin friction component of the total drag, thereby conferring a competitive advantage over other ...
2011 / Hazim Moria, Harun Chowdhury, Firoz Alam, Aleksandar Subic -
Slip Ratio Based Traction Coordinating Control of Wheeled Lunar Rover with Rocker Bogie
Abstract This paper investigates the traction coordinating control issue of the wheeled lunar rover with Rocker Bogie in rough terrain. Based on the improved exponential approach law, the algorithm of coordinating control is designed to optimize the ...
2011 / Shumei Wu, Linhui Li, Yibing Zhao, Ming Li -
The Design of Vibration Monitoring System Based on PC104 Bus
Abstract In practical production, to guarantee the high quality vibration equipment safe operation, abnormal vibration problems of vibration equipment must be detected early. The paper studies the abnormal vibration equipment vibration monitoring...
2011 / Zhang Ye, Li Wenxing -
Research on software testing technique of airborne equipment based on airworthiness
Abstract According to the characteristics of the airborne embedded software, the airworthiness-based software testing technique and testing standard are systematically researched. The verification process of DO-178B standard is analyzed. The...
2011 / Feng Tingting, Zhao Yuerang, Hou Xiaojun, Sun Yan, Bao Yu -
Analysis of GMM by a Gaussian Wavelet transform
Abstract The problem of GMM is applied to various fields, such as analysis of biometrics, the voice model in speech recognition, and picture information, and noise removal. A location parameter expresses a position and a scale parameter expresses a...
2012 / Kiyoshi Tsukakoshi, Kenichi Ida -
Design and Model Test of Shaft Lining Compressible Connector in Deep Hydrophobic Alluvium
Abstract Because of the hydrophobic consolidation settlement, there is a large axial additional force between the deep alluvium and the shaft lining, which is the major cause for damage of the shaft. The article proposes a new type compressible...
2012 / Wang Xiaojian, Yao Zhishu, Rong Chuanxin, Cai Haibin, Cheng Hua -
Numerical Modeling of the Coupled Electromagnetic and Mechanical Phenomena of Linear Stepping Motors2012 / Mustapha Zaouia, Nacereddine Benamrouche, M'hemed Rachek
-
Validation of an Extended Approach to Multi-robot Cell Design and Motion Planning
Abstract According to both industrial practice and literature, multi-robot cell design and robot motion planning for vehicle spot welding are two sequential activities, managed by different functional units through different software tools. Due to...
2015 / Stefania Pellegrinelli, Nicola Pedrocchi, Lorenzo Molinari Tosatti, Anath Fischer, Tullio Tolio -
Reduction of Flexible Workpiece Vibrations with Dynamic Support Realized as Tuned Mass Damper
Abstract Elimination of flexible workpiece vibrations with a special damper, attached to workpiece by gluing, is considered. An unconventional approach for tuned mass damper application is proposed, based on damper tuning with respect to a certain...
2013 / S. Bolsunovsky, V. Vermel, G. Gubanov, A. Leontiev -
Evaluating impact of electrified vehicles on fuel consumption and CO2 emissions reduction in Lebanese driving conditions using onboard GPS survey
Abstract Reviewing past and current mobility assessments for the Lebanese road transport sector, road mobility demand has experienced a real explosion since 1990, and the trend is strongly upward over the decade to come. This growth is mainly...
2011 / Charbel Mansour, Elias Zgheib, Sabine Saba -
Analytical and Experimental Study of Recycling Baffled Double-Pass Solar Air Heaters with Attached Fins2013 / Chii Ho, Hsuan Chang, Rei Wang, Chun Lin