Mechanical engineering topic list of research papers
-
Determination of Pressure Drop in Horizontal Pipes for Air – Water Two Phase Flow2013 / Alina Filip
-
The Control System Based on FPGA Technology For Fatigue Test Stand MZGS-100 PL2015 / Wojciech Macek, Ewald Macha
-
An Integrated Reverse Engineering Approach for Accuracy Control of Free-Form Objects2016 / Vimal Kumar Pathak, Chitresh Nayak, Amit Kumar Singh, Himanshu Chaudhary
-
Monitoring of train-induced vibrations on rock slopes2017 / Jiangbo Xu, Changgen Yan, Xu Zhao, Ke Du, Heng Li, et al.
-
An Analysis Method of Operation State for Boost Converter with Voltage Feedback Control
Abstract When system parameters were adjusted, some instability phenomenon could occur in closed-loop DC-DC converter. For improving the stability of converter system, an analysis method of operation state for converter was presented based on the...
2012 / Leng Zhaoxia, Liu Qingfeng, Sun Jinkun, Wang Huamin -
Intelligent Control System of Stack-boiler
Abstract Boiler combustion control system's basic task is to make fuel burn calories adapt to the needs of the water temperature and ensure the economical combustion and the safe operation. In the foundations which have analyzed the stack-boiler's...
2012 / Li Jing, Niu Jingxia, Lang Jianhua, Li Shaofeng, Li Zhi -
Experimental Study on the Mode of Active Truss
Abstract By using a 78-bar space truss, the configuration and properties of a linear active structure are studied experimentally, and the experiment technique for constructing an active structure is practiced in this paper. An active truss is...
2012 / Gong Jing, Mao Yu, Wang Yong-yi -
Study of Reliability of Substation for Coal Mine Supervision System
Abstract The sub-station has direct impact on the reliability of coal mine safety monitoring system reliability. The mine sub-station reliability of expected value and accelerated life test of the reliability value is given by setting the number of...
2012 / Jikun Guo, Yongyan Zhang -
Design of MEMS-based micro direct methanol fuel cell stack
Abstract This paper presents two kinds of direct methanol fuel cell (μDMFC) stack in planar array. The silicon-based DMFC stack is designed in a flip-flop configuration using MEMS technology, and the stainless steel stack is fabricated using...
2009 / Chunguang Suo, Xiaowei Liu, Jialin Duan, Guangbo Ding, Yufeng Zhang -
On Combustion of Diesel Fuel Drops at LPG Fuelling by Diesel Gas Method
Abstract The Liquid Petroleum Gas can be use at diesel engine with significant reductions in nitrous oxides and smoke emissions and affects the in-cylinder mixture forming and combustion process. The paper presents the results of a thermodynamic...
2016 / Alexandru Cernat, Constantin Pana, Niculae Negurescu, Cristian Nutu -
Experimental evaluation of acceleration waveform replication on electrohydraulic shaking tables2016 / Gang Shen, Zhencai Zhu, Xiang Li, Ge Li, Yu Tang, et al.
-
Modeling of Thermel Transport for GMAW2012 / Aniruddha Ghosh
-
Material tester with static and dynamic micro forces
Abstract Material testers with static and dynamic micro forces based on the Levitation Mass Method (LMM) are reviewed. In the LMM, the inertial force of a mass levitated using a pneumatic linear bearing is used as the reference force applied to the...
2009 / Yusaku Fujii, Koichi Maru, Dong-Wei Shu, Bin Gu, Takao Yamaguchi, et al. -
Cooperative Transportation of Aload Using Nonholonomic Mobile Robots
Abstract This paper presents an application of multi-robot system using nonholonomic wheeled mobile robots. These robots cooperate with each other to transport a single load which is carried without any rigid connections. Each mobile robot has a...
2012 / Chia Choon Loh, Ansgar Traechtler -
Vibrational Study of Fluid-Filled Functionally Graded Cylindrical Shells Resting on Elastic Foundations2011 / Abdul Ghafar Shah, Tahir Mahmood, Muhammad Nawaz Naeem, Shahid Hussain Arshad
-
Numerical investigation of the fully developed turbulent flow over a moving wavy wall using k–ε turbulence model
Abstract The subject matter of this research is that of improving and enhancing the results of the mathematical models of the classical turbulent flows with increasing Reynolds numbers over the surfaces of complex configurations to improve its...
2011 / K.A. Hafez, O.A. Elsamni, K.Y. Zakaria -
Research on Removing Shadow in Workpiece Image Based on Homomorphic Filtering
Abstract The shadow in the image has a great influnece for the accuracy of the image segmentation and measurement, while the workpiece is detected in the machine vision system. In the paper a homomorphic filter algorithm is designed for removing...
2012 / W.D. Yang, W. Guo, K. Peng, L.B. Liu -
Estimation of Reference Vehicle Speed based on T-S Fuzzy Model
Abstract To estimate the reference vehicle speed, the vehicle dynamic and wheel dynamic is modeled. Based on analyzing the braking process and dynamic model of vehicle and wheel, the T-S fuzzy model of vehicle deceleration is established. Then the...
2011 / Taixiong Zheng, Fulei Ma, Kaibi Zhang -
Holistic Precision Error Model for 5 Axis HSC Machining Centre with Rotating Rolling Units In Direct Drives
Abstract The paper presents a holistic model of thermal and dynamic load errors for a five axis machining centre. The reasons for using such a model are presented, focusing on the interaction between the behaviours of the machine tool modules. A...
2012 / J. Jedrzejewski, W. Kwasny -
PAMSCOD: Platoon-based Arterial Multi-modal Signal Control with Online Data
Abstract A unified platoon-based mathematical formulation called PAMSCOD is presented to perform arterial (network) traffic signal control while considering multiple travel modes in a vehicle-to-infrastructure communications environment. First, a...
2011 / Qing He, K. Larry Head, Jun Ding