Mechanical engineering topic list of research papers
-
Modeling of Workflow in the Grip-Container-Grip System of Body Garbage Trucks
Abstract To provide for the environmental safety of urban areas the problems of collection, disposal and utilization of municipal solid waste (MSW) are widely considered. The initial unit in the processing chain of MSW utilization is represented by...
2017 / R.V. Kargin, I.A. Yakovlev, E.A. Shemshura -
Analysis of a new model of H1N1 spread: Model obtained via Mittag-Leffler function2017 / Badr Saad T Alkahtani, Ilknur Koca, Abdon Atangana
-
A knowledge-embedded lossless image compressing method for high-throughput corrosion experiment2018 / Peng Shi, Bin Li, Phyu Hnin Thike, Lianhong Ding
-
Modeling Tractive Effort Torque of Wheel in Deformation Movements of Pneumatic Tire Wheel
Abstract The article is devoted to the simulation of torque moment through the deformation motion of the pneumatic wheel. Despite the fact that the dependence of torque moment of the vehicle from the slip value which can be interpreted as a vertical ...
2017 / V.P. Lapshin, I.A. Turkin -
A Comparative Study of Ductile Damage Models Approaches for Joint Strength Prediction in Hot Shear Joining Process
Abstract Ductile fracture prediction is often considered as a challenging task in complex stress state applications, such as metal joining process. A systematic method for predicting the joint strength in the hot shear joining process is presented...
2017 / Mohanraj Murugesan, Seonggi Lee, Dongwook Kim, Youn-Hee Kang, Naksoo Kim -
Analysis on heat transfer effect of air-temperature vaporizer in LNG satellite station2017 / Guoguang Ma, Chen Zhang, Licai Zhao
-
Comparative Experiment Study on Nitrogen Injection and Free Desorption of Methane-Rich Bituminous Coal Under Triaxial Loading2018 / Lei Zhang, Zhiwei Ye, Jun Tang, Dingyi Hao, Cun Zhang
-
Analysis of heat transfer critical point in LT-MEE desalination plant
Abstract Based on the internal relationship of thermodynamic and structure parameters of the low-temperature multi-effect evaporation (LT-MEE) desalination plant, calculation of the temperature difference distribution in a typical horizontal-tube...
2018 / Shengqiang Shen, Yali Guo, Luyuan Gong -
Installations Criterion of Deceleration Device in Volumetric Hydraulic Drive
Abstract A criterion for the installation of the deceleration device in the executive mechanism in volumetric hydraulic drive with inertia loading is proposed. For this purpose, the positioning of the executive mechanism realized on the rigid...
2017 / V. Sokolov, O. Krol -
Development of the Internally Cutting Milling Cutter Model with Radial Advance for Treatment of Profiling Rolls
Abstract Demountable joints for torque transmission are some of the most important of the machine elements. High requirements on fatigue value, life time, etc. are made for them. In this paper we discuss the method of profiling rolls treatment with...
2017 / V.V. Kuts, M.S. Razumov, M.A. Sidorova -
Real time detection system for rail surface defects based on machine vision2018 / Yongzhi Min, Benyu Xiao, Jianwu Dang, Biao Yue, Tiandong Cheng
-
Interaction of Rolling-Element and Fluid-Film Bearings Dynamic Characteristics in Hybrid Bearings
Abstract The reliability of rotating machinery is to a considerable degree determined by the bearing units. For several applications the requirements in rotation speed, bearing load and maximal vibration level are so extreme that neither...
2017 / R. Polyakov -
The optimum design of falling-film evaporator and numerical simulation of distributor
Abstract The distribution of the refrigerant has a significant influence on the performance of the falling-film evaporator. The distributor is the key component in the falling-film evaporator, which determines the uniformity of the distribution of...
2017 / Fengzhen Liu, Da Wang, Qiang Wang, Jianhua Ga -
Numerical Simulation of Airflow Around Cooling Towers in Semi-closed Space
Abstract As an important part of the air conditioning system, the operating performance of the cooling tower has a direct impact on heating and refrigeration of the air conditioning system. Now the cooling towers are placed in the room in many...
2017 / Zhu Yanhe, Deng Yahong, Li Chang, Zeng Junyong, Wu Xuezhi, et al. -
Internal Flow-Turning – a new approach for the manufacture of tailored tubes with a constant external diameter
Abstract Tailored hollow profiles with a variable wall thickness are very useful for achieving weight reductions, including for parts in the automotive industry. Although several approaches exist for manufacturing tubes with a variable wall...
2017 / Eugen Wiens, Werner Homberg -
A study on the effectiveness of fresh air units in temperature and humidity independent control system
Abstract In the temperature and humidity independent air conditioning system, the fresh air units, in addition to bear all the new wind load, indoor wet load and part of the indoor cooling load, also need to control the temperature of supply air and ...
2017 / Yanfa Tian -
Determination of the Best Distribution and Effective Interval using Statistical Characterization of Uncertain Variables
Abstract In this paper, an algorithm for estimating the best distribution about data containing uncertainties is proposed. The proposed algorithm combines sequence statistical modeling (SSM) and a method for determining the minimum experimental...
2017 / Minho Joo, Jaehyeok Doh, Jongsoo Lee -
Thermal experience improvement and thermal requirement difference in bed warming conditions
Abstract The human body is exposed to nonuniform thermal environment due to asymmetric bedding coverage of head and covered body. The purpose of the study is to investigate the thermal requirement difference of local body parts during sleep....
2017 / Cong Song, Yanfeng Liu, Xiaojun Zhou, Jiaping Liu -
Numerical analysis of collision of the multimaterial bird model with helicopter windshield2017 / Janusz Ćwiklak
-
The buckling strength of the new hybrid nanocomposite laminates using combination of layered and particulate nano fillers2017 / Yasser Rostamiyan, Reza Azadi