Mechanical engineering topic list of research papers
-
New TA Index-Based Rollover Prevention System for Electric Vehicles2015 / Xiang Liu, Min Xu, Mian Li
-
Thermal behavior investigation of silicon-Pyrex micro heat pipe2014 / Yi Luo, Gang Liu, Liang-liang Zou, Bei-ke Yu, Xiao-dong Wang
-
Numerical investigation on the aerodynamic characteristics of high-speed train under turbulent crosswind2014 / Mulugeta Biadgo Asress, Jelena Svorcan
-
Geometric Modularity in the Thermal Modeling of Solar Steam Turbines
Abstract To optimize the start-up schedules of steam turbines operating in concentrating solar power plants, accurate predictions of the temperatures within the turbine are required. In previous work by the authors, thermal models of steam turbines...
2014 / M. Topel, J. Spelling, M. Jöcker, B. Laumert -
Film cooling effects on the tip flow characteristics of a gas turbine blade
Abstract An experimental investigation of the tip flow characteristics between a gas turbine blade tip and the shroud was conducted by a pressure-test system and a particle image velocimetry (PIV) system. A three-times scaled profile of the GE-E3...
2015 / Jin Wang, Bengt Sundén, Min Zeng, Qiuwang Wang -
Numerical investigation of the effects of dwell time duration in a two-stage injection scheme on exergy terms in an IDI diesel engine by three-dimensional modeling2013 / Samad Jafarmadar, Alborz Zehni
-
Parametric optimization of ultrasonic machining process using gravitational search and fireworks algorithms
Abstract Ultrasonic machining (USM) is a mechanical material removal process used to erode holes and cavities in hard or brittle workpieces by using shaped tools, high-frequency mechanical motion and an abrasive slurry. Unlike other non-traditional...
2014 / Debkalpa Goswami, Shankar Chakraborty -
Assembling the unexpected inspiration–from linking to jigsaw
Abstract Linking pieces of design information for inspiration are an important part of the early phase of the design process. One key linking operation is assembling, wherein designers create new ideas by assembling partial or whole pieces of ideas...
2014 / Chia-Hui Nico Lo, Teng-Wen Chang, Ih-Cheng Lai -
Emission and Performance Improvement Analysis of Biodiesel-diesel Blends with Additives
Abstract This experimental investigation evaluates the comparative improvement of palm biodiesel-diesel blend (20% palm biodiesel-80% diesel) with the help of ethanol, n-butanol and diethyl ether as additives regarding emission and performance...
2014 / S. Imtenan, H.H. Masjuki, M. Varman, M.I. Arbab, H. Sajjad, et al. -
Turbulent Study of Roll Pitch Yaw Phenomena for a Finned Store Released from a Wing Regarding Different Values of Angle of Attack
Abstract In this article, the commercial software CFD FASTRAN is applied to study the roll, pitch and yaw phenomena of turbulent flows around a finned store released from a wing regarding different values of angle of attack. The three-dimensional,...
2014 / Shih-Ying Yang, Wei-Ting Liao, Qing-Hao Chen -
Coupled vibration of driving sections for an electromechanical integrated harmonic piezodrive system2014 / Chong Li, Jichun Xing, Lizhong Xu
-
Micro-scale ORC-based combined heat and power system using a novel scroll expander2014 / M. Jradi, J. Li, H. Liu, S. Riffat
-
Numerical analysis of friction factor for a fully developed turbulent flow using k–ε turbulence model with enhanced wall treatment
Abstract The aim of this study is to formulate a computational fluid dynamics (CFD) model that can illustrate the fully turbulent flow in a pipe at higher Reynolds number. The flow of fluids in a pipe network is an important and widely studied...
2014 / Muhammad Ahsan -
Carbon Market Regulation Mechanism Research Based on Carbon Accumulation Model with Jump Diffusion2014 / Dongmei Guo, Yi Hu, Bingjie Zhang
-
Enhanced Machinability of Ti-5553 Alloy from Cryogenic Machining: Comparison with MQL and Flood-cooled Machining and Modeling
Abstract Due to the high performance requirements such as high strength, excellent properties at room and high working temperatures, better resistance to corrosion and fatigue, etc., Ti-5553alloy has been generally considered as a suitable material...
2015 / Y. Sun, B. Huang, D.A. Puleo, I.S. Jawahir -
Fuzzy Based Flatness Control of an Induction Motor
Abstract Induction motors are widely used in industry and many other fields due to its robustness, reliability, low price and free maintenance. Control of an induction motor is a complicated task because of the unknown disturbances and the...
2011 / Liping Fan, Liang Zhang -
The Contact Analysis for Deep Groove Ball Bearing Based on ANSYS
Abstract A 3-D model of deep groove ball bearing was built by using APDL language embedded in the finite element software ANSYS. Through contact analysis, the changes could be showed in stress, strain, penetration, sliding distance, friction stress...
2011 / Tang Zhaoping, Sun Jianping -
3D hand tracking using Kalman filter in depth space2013 / Sangheon Park, Sunjin Yu, Joongrock Kim, Sungjin Kim, Sangyoun Lee
-
Ant colony optimization for job shop scheduling using multi-attribute dispatching rules2013 / Przemysław Korytkowski, Szymon Rymaszewski, Tomasz Wiśniewski
-
Dynamic Model Identification of the Main Steam Temperature for Supercritical Once-through Boiler
Abstract In this paper the dynamic model of single-input and single-output (SISO) is established, which take the coal feed as the input and the main steam temperature as the output. Recursive extended least squares (RELS) was used to identify the...
2012 / Hong-bo Lu, Yu Zhang, Chang-kai Wu, Wei-hua Sun