Mechanical engineering topic list of research papers
-
Geometric nonlinear formulation for curved beams with varying curvature
Abstract Based on exact Green strain of spatial curved beam, the nonlinear strain-displacement relation for plane curved beam with varying curvature is derived. Instead of using the previous straight beam elements, curved beam elements are used to...
2012 / Keqi Pan, Jinyang Liu -
Design of a Wireless Multi-Radio-Frequency Channels Inspection System for Bridges2012 / Yan Yu, Jie Wang, Xingquan Mao, Hongbo Liu, Lei Zhou
-
An Energy Analysis of Electric and Pneumatic Ultra-high Speed Machine Tool Spindles
Abstract There is a growing demand for ultra-high speed precision machine tool spindles to create complex miniature devices and features, in consumer markets such as medical devices, electronics and communications. The key enabling drive...
2015 / Paul Harris, Barbara Linke, Stephen Spence -
Application and Comparison of Different Combustion Models of High Pressure LOX/CH4 Jet Flames2014 / Maria De Giorgi, Aldebara Sciolti, Antonio Ficarella
-
Experimental Investigation of Heat Transfer Performance of Rotating Heat Pipe
Abstract This study is an experimental investigation of heat transfer performance of rotating heat pipe. The experiments are performed for a rotating heat pipe and a no heat pipe. The geometry of the two pipes is the same. The test conditions of the ...
2015 / Minghui Xie, Zhihu Xue, Wei Qu, Wei Li -
Fatigue Reliability Sensitivity Analysis of Complex Mechanical Components under Random Excitation2011 / Hao Lu, Yimin Zhang, Xufang Zhang, Xianzhen Huang
-
Integrating the TRIZ and Taguchi's Method in the Optimization of Processes Parameters for SMT2013 / Yung-Tsan Jou, Wen-Tsann Lin, Wei-Cheng Lee, Tsu-Ming Yeh
-
A Damage Prognosis Method of Girder Structures Based on Wavelet Neural Networks2014 / Rumian Zhong, Zhouhong Zong, Jie Niu, Sujing Yuan
-
A Fractal Model for the Maximum Droplet Diameter in Gas-Liquid Mist Flow2013 / Xiao-Hua Tan, Jian-Yi Liu, Xiao-Ping Li, Guang-Dong Zhang, Chuan Tang
-
The Static WKB Solution to Catenary Problems with Large Sag and Bending Stiffness2014 / Yuhung Hsu, Chanping Pan
-
Atmospheric Environment Fabrication of Composite Films by Ethanol Catalytic Combustion and Its Use as Counter Electrodes for Dye-Sensitized Soar Cells2014 / Xiaoping Zou, Cuiliu Wei
-
Large Eddy Simulation of a Bluff Body Stabilized Lean Premixed Flame2014 / A. Andreini, C. Bianchini, A. Innocenti
-
Analysis of Stiffened Penstock External Pressure Stability Based on Immune Algorithm and Neural Network2014 / Wensheng Dong, Xuemei Liu, Yunhua Li
-
Energy-aware integrated process planning and scheduling for job shops2014 / M. Dai, D. Tang, Y. Xu, W. Li
-
A 2D graphical representation of the sequences of DNA based on triplets and its application2014 / Sai Zou, Lei Wang, Junfeng Wang
-
Fuzzy modeling, maximum likelihood estimation, and Kalman filtering for target tracking in NLOS scenarios2014 / Jun Yan, Kegen Yu, Lenan Wu
-
Design, construction, and implementation of a remote fuel-level monitoring system2014 / Gbenga Obikoya
-
CBN Grinding Performance Improvement in Aircraft Engine Components Manufacture
Abstract Cubic Boron Nitride (CBN) grinding is extensively employed in the aerospace industry as it allows to effectively grind high performance aerospace metal alloys such as nickel base superalloys. With reference to a real industrial case of CBN...
2013 / Alessandra Caggiano, Roberto Teti -
Numerical Investigation of Inlet Distortion on an Axial Flow Compressor Rotor with Circumferential Groove Casing Treatment
Abstract On the base of an assumed steady inlet circumferential total pressure distortion, three-dimensional time-dependent numerical simulations are conducted on an axial flow subsonic compressor rotor. The performances and flow fields of a...
2008 / Huang Jian, Wu Hu -
Experimental Investigation on Complex Structures Machining by Electrochemical Micromachining Technology
Abstract Electrochemical micromachining (EMM) technology for fabricating micro structures is presented in this article. By applying ultra short pulses, dissolution of a workpiece can be restricted to the region very close to the electrode. First, an ...
2010 / Liu Yong, Zhu Di, Zeng Yongbin, Huang Shaofu, Yu Hongbing