Mechanical engineering topic list of research papers
-
Development of a New Marine Rotary Desiccant Airconditioning System and its Energy Consumption Analysis
Abstract There is abundant high-energy-grade residual heat on ships. The rotary desiccant air-conditioning (A/C) system can recover ship's residual heat to work as the system's driving heat source, achieving significant energy-saving for ship's A/C. ...
2012 / Zheng Guojie, Zheng Chaoyu, Yang Guanghai, Chen Wu -
Improving Motion Accuracy of Tool Center Point Using Model-reference Feedforward Controller
Abstract To achieve high-precision machining with NC machine tools, their feed drive systems must minimize position errors at the tool center point. When acceleration and deceleration occur, such mechanical errors as elastic deformation of the...
2012 / Kotaro Nagaoka, Atsushi Matsubara -
Method Of Real-Time Assessing Of Life Of Hp Heater Tube-Plate In Power Plants
Abstract In large power plants, in order to improve safety and stability of HP heaters(High Pressure) in operation, thicker tubeplates are designed and made, which will lead to more thermal stress between tube-plate and end-cover, furthermore, will...
2012 / Wan Jianfeng, Liu Junli, Meng Fanmao, Bi Wenyan -
A New Method for Circular Testing of Machine Tools Under Loaded Condition
Abstract This paper presents a novel test device for the evaluation of the accuracy of machine tools. The design concept is similar to a double ball bar (DBB) with the difference that an adjustable load generated by the device can be applied between ...
2012 / Andreas Archenti, Mihai Nicolescu, Guillaume Casterman, Sven Hjelm -
Ecological Optimization For A Generalized Irreversible Carnot Engine With An Universal Heat Transfer Law
Abstract In this paper, the optimal ecological performance of an irreversible Carnot engine with the losses of heat-resistance, heat leak and internal irreversibility, in which the heat transfer between the working fluid and the heat reservoirs...
2012 / You-Bang Zhan, Peng-Cheng Ma, Xiao-Qin Zhu -
Grasping Strategy and Control Algorithm of Two Robotic Fingers Equipped with Optical Three-Axis Tactile Sensors
Abstract This paper presents grasping strategy of robot fingers based on tactile sensing information acquired by optical three-axis tactile sensor. We developed a novel optical three-axis tactile sensor system based on an optical waveguide...
2012 / Hanafiah Yussof, Masahiro Ohka -
Geometrical Data Extraction Using Interaction Between Objects and Robotic Fingers Equipped with Three-axis Tactile Sensors
Abstract If humans want to know geometrical information about certain objects, we can pick them up, push them, pull them or turn them to learn the distance and relationship between the objects and us. Although this tactic is very effective for...
2012 / Sukarnur Che Abdullah, Masahiro Ohka, Yusuke Dosho, Takuya Ikai, Hanafiah Yussof -
Workflow and information centered support of design processes—the IMPROVE perspective
Abstract Design process excellence is considered a major differentiating factor between competing enterprises since it determines the constraints within which plant operation and supply chain management are confined. The most important prerequisite...
2004 / Wolfgang Marquardt, Manfred Nagl -
Experimental study of entrainment phenomenon in a trapped vortex combustor
Abstract Trapped vortex combustor (TVC) is an advanced low-pollution gas turbine combustor, with the adoption of staged combustion technique. To achieve low-pollutant emission and better combustion performance, the proportion of the air flow in each ...
2013 / Rongchun Zhang, Weijun Fan -
Single wave extraction in continuous intracranial pressure signal with lifting wavelet transformation and discrimination rules2011 / Zhong Ji, Lan Zhu, Xing Yang, Lipeng Jiang
-
Tri-stress Accelerated Life Test for Cylinders
Abstract A life-stress model for cylinders was built based on wear fault mechanism, and the test scheme was optimized using temperature, pressure and velocity as acceleration stresses. An accelerated life test for cylinders was designed and...
2011 / Guohui Han, Yongling Fu -
An experimental study on improvement of Savonius rotor performance
Abstract For solving the world energy problem and the bad effect of conventional sources of energy on environment, great attention allover the world is paid towards the use of renewable energy sources. Special interest is paid towards wind energy...
2012 / N.H. Mahmoud, A.A. El-Haroun, E. Wahba, M.H. Nasef -
The Influence of Structural Changes on The Interior Flow Field's Characteristics of Disc Separator
Abstract Numerical method was an important means of studying disc separator's interior flow field for optimizing their design. While it reduced the required testing time and costs. Based on the VOF model, the discrete phase model, N-S equations and...
2011 / Zhiguo Zhao -
Decision-making and controlling for products collaborative design implement process based on fuzzy Petri net
Abstract In order to solve the controlling problems with multiple design tasks and uncertain dynamic design process, a model of manufacture collaborative design process based on process control Petri nets is proposed by introducing decision rules...
2011 / Yin-zhang Guo, Jian-chao Zeng -
Preface to Part V Systems Engineering Applications2012 / Joseph E. Kasser
-
Development and applications of the intrinsic model for formwork pressure of self-consolidating concrete2012 / Seung Hee Kwon, Jae Hong Kim, Surendra P. Shah
-
Review of Recent Literature on Static Analyses of Composite Shells: 2000-20102012 / Mohammad S. Qatu, Ebrahim Asadi, Wenchao Wang
-
Non-Axisymmetric Mass Transfer Phenomenon behind an Orifice in a Curved Swirling Flow2013 / Tsuyoshi Takano, Takayuki Yamagata, Yuki Sato, Nobuyuki Fujisawa
-
Soot Concentration Measurement System of the Stationary Pollution Source Using the Scattering-Transmission Method
Abstract The soot emitted from the stationary pollution source is one of the important atmospheric pollutants. The soot concentration is an important influence and can detect the total emissions condition of the pollution source. The new on-line...
2013 / Yanjun Zhao, Meng Fanwei, Qu Bin -
Laminar burning characteristics of 2-methylfuran and isooctane blend fuels
Abstract 2-Methylfuran (MF) has become very attractive due to the recent breakthrough in its production method using the process of dehydration and hydrogenolysis of fructose. MF–gasoline blended fuel has been considered as a potential choice of...
2013 / Xiao Ma, Changzhao Jiang, Hongming Xu, Haichun Ding, Shijin Shuai