Mechanical engineering topic list of research papers
-
Experimental Study of the Triplet Synchronization of Coupled Nonidentical Mechanical Metronomes2015 / Ji Jia, Zhiwen Song, Weiqing Liu, Jürgen Kurths, Jinghua Xiao
-
A comparative thermodynamic analysis of ORC and Kalina cycles for waste heat recovery: A case study for CGAM cogeneration system
Abstract A thermodynamic modeling and optimization is carried out to compare the advantages and disadvantages of organic Rankine cycle (ORC) and Kalina cycle (KC) as a bottoming cycle for waste heat recovery from CGAM cogeneration system....
2016 / Arash Nemati, Hossein Nami, Faramarz Ranjbar, Mortaza Yari -
Visual measurement of the evaporation process of a sessile droplet by dual-channel simultaneous phase-shifting interferometry2015 / Peng Sun, Liyun Zhong, Chunshu Luo, Wenhu Niu, Xiaoxu Lu
-
A complete strategy for efficient and accurate multibody dynamics of flexible structures with large lap joints considering contact and friction2016 / Florian Pichler, Wolfgang Witteveen, Peter Fischer
-
Numerical simulation and performance analysis of a four-stage centrifugal pump2016 / W. Li, X. Jiang, Q. Pang, L. Zhou, W. Wang
-
A Multi-objective Optimization Model for Planning Unmanned Aerial Vehicle Cruise Route2016 / Xiaofeng Liu, Limei Gao, Zhiwei Guan, Yuqing Song, Rui Zhang
-
Guidance control strategy for air traffic flow in terminal areas2016 / H.-h. Zhang, X.-l. Yang, W. Fan, Z.-y. Wang, Z.-h. Liao
-
Searching for collisions between mobile robot and environment2016 / M. Hrubos, J. Svetlik, Y. Nikitin, R. Pirnik, D. Nemec, et al.
-
A hyperbolic shear and normal deformation theory for deflection and stresses of FGM sandwich plate2016 / H. Saidi, A. Tounsi, A. E.A. Adda.Bedia
-
An optimal jerk-stiffness controller for gait pattern generation in rough terrain2016 / Amira Aloulou, Olfa Boubaker
-
Particle swarm optimization algorithm reinforced fuzzy proportional-integral-derivative for a quadrotor attitude control2016 / J.-S. Chiou, H.-K. Tran, M.-Y. Shieh, T.-N. Nguyen
-
Multi-condition optimization and experimental study of impeller blades in a mixed-flow pump2016 / H. Liu, X. Chen, K. Wang, M. Tan, X. Zhou
-
People detection and tracking using RGB-D cameras for mobile robots2016 / H. Liu, J. Luo, P. Wu, S. Xie, H. Li
-
Nonlinear dynamic mechanism of rolling element bearings with an internal clearance in a rotor-bearing system2016 / G. Nan, M. Tang, E. Chen, A. Yang
-
Enhancing Spindle Power Data Application with Neural Network for Real-time Tool Wear/Breakage Prediction During Inconel Drilling
Abstract Nowadays, digital manufacturing systems with real-time process monitoring and control are in high demand in industries for productivity and quality improvement. During machining, such a system is anticipated to excerpt reliable data within...
2016 / Raphael Corne, Chandra Nath, Mohamed El Mansori, Thomas Kurfess -
PID-Controller Tuning Optimization with Genetic Algorithms in Servo Systems2013 / Arturo Y., Rene de J. Romero-Troncoso, Luis Morales-Velazquez, Roque A.
-
Virtual metrology frame technique for improving dynamic performance of a small size machine tool
Abstract This paper presents a novel concept, a virtual metrology frame, for enhancing the dynamic performance of a machine tool with a flexible structural frame. The dynamic properties of a machine are directly affected by the stiffness of its...
2016 / Jonathan Abir, Stefano Longo, Paul Morantz, Paul Shore -
Research on early-warning index of the spatial temperature field in concrete dams2016 / Guang Yang, Chongshi Gu, Tengfei Bao, Zhenming Cui, Kan Kan
-
Small-angle tomography algorithm for transmission inspection of acoustic linear array2016 / Alexey Soldatov, Andrey Soldatov, Masha Kostina, Petr Bakanov, Marina Polonskaya
-
Dynamic reliability prediction of bridge member based on Bayesian dynamic nonlinear model and monitored data2016 / X. Fan, Y. Liu