Mechanical engineering topic list of research papers
-
Modeling and simulation of dynamical contact of asperities between flat rough surfaces2016 / Y. Tan, L. Zhang, L. Ma, X. Lv
-
Kinematic and Dynamic Analysis of a Cable-climbing Robot2015 / Fengyu Xu, Jingjin Shen, GuoPing Jiang
-
Integrated assembly and motion planning using regrasp graphs2016 / Weiwei Wan, Kensuke Harada
-
Self-excited Vibration Analysis for the Feed Support System in FAST2014 / Xiaoqiang Tang, Zhihua Liu, Zhufeng Shao, Liping Wang
-
A Fast Approach to Arm Blind Grasping and Placing for Mobile Robot Transportation in Laboratories2014 / Hui Liu, Norbert Stoll, Steffen Junginger, Kerstin Thurow
-
Wake-up timer and binary exponential backoff for ZigBee-based wireless sensor network for flexible movement control system of a self-lifting scaffold2016 / H. Liang, G. Yang, Y. Xu, I. Gondal, C. Wu
-
Mobile Robot for Life Science Automation2013 / Hui Liu, Norbert Stoll, Steffen Junginger, Kerstin Thurow
-
Colias: An Autonomous Micro Robot for Swarm Robotic Applications2014 / Farshad Arvin, John Murray, Chun Zhang, Shigang Yue
-
Bio-inspired online variable recruitment control of fluidic artificial muscles2016 / Tyler E Jenkins, Edward M Chapman, Matthew Bryant
-
A Low-cost, Light-weight Climbing Robot for Inspection of Class Curtains2014 / Ran Liang, Meteb Altaf, Eball Ahmad, Rong Liu, Ke Wang
-
Adaptive Impedance Controller for a Robot Astronaut to Climb Stably in a Space Station2016 / Bo Wei, Zhihong Jiang, Hui Li, Que Dong, Wencheng Ni, et al.
-
Degradation feature extraction of the hydraulic pump based on local characteristic-scale decomposition and multi-fractal spectrum2016 / Z. Tian, H. Li, J. Sun, Y. Li
-
Design and Construction of a Specialised Biomimetic Robot in Multiple Swimming Gaits2015 / Sayyed Farideddin Masoomi, Stefanie Gutschmidt, Nicolas Gaume, Thomas Guillaume, Connor Eatwel, et al.
-
Dynamic Modeling and Inverse Dynamic Analysis of Flexible Parallel Robots2012 / Du Zhaocai, Yu Yueqing
-
Self-sensing and strengthening effects of reinforced concrete structures with near-surfaced mounted smart basalt fibre-reinforced polymer bars2016 / Y. Tang, Z. Wang, M. Song
-
On the Numerical Modelling and Error Compensation for General Gough-Stewart Platform2014 / Eusebio Hernandez, Sergio Ivvan Valdez, Eduardo Sanchez
-
Multilevel control of an anthropomorphic prosthetic hand for grasp and slip prevention2016 / R. Barone, A. L. Ciancio, R. A. Romeo, A. Davalli, R. Sacchetti, et al.
-
Surface Roughness Evolution Model for Finishing Using an Abrasive Tool on a Robot2015 / Angel Fernandez, Jose Antonio Dieste, Carlos Javierre, Jorge Santolaria
-
A discrete group search optimizer for blocking flow shop multi-objective scheduling2016 / D. Guanlong, Z. Shuning, Z. Mei
-
Improved Process Geometry Model with Cutter Runout and Elastic Recovery in Micro-end Milling
Abstract A process geometry model determines engagement angle and instantaneous uncut chip thickness which forms basis in predicting cutting forces and surface quality in micro-end milling operation. This paper presents a process geometry model...
2016 / Tesfaye M. Moges, K.A. Desai, P.V.M. Rao