Mechanical engineering topic list of research papers
-
Prediction of the Functional Performance of Machined Components Based on Surface Topography: State of the Art2016 / Wit Grzesik
-
Research of Dynamics of the Rotor with Three-film Bearings
Abstract Rotating floating rings in the rotor bearings are widely used for decrease of rotor vibrations in small rotor machines. Such bearings are named two-film, because have two lubricant films. Dynamics of the rotor with...
2016 / A. Fischer, A. Doikin, A. Rulevskiy -
Measurement Uncertainty Analysis of the Strain Gauge Based Stabilographic Platform2014 / Wojciech Walendziuk
-
A computational methodology to calculate the required power in disc crushers
Abstract This study aims to contribute to the estimation of power consumption in a disintegration process in disc crushers (fixed and mobile). The study covers the dynamic analysis of forces acting on the particles and the mobile disc. A detailed...
2016 / J.M. Zuñiga, J.L. Mantari -
Mathematical Underpinnings for Achieving Design Functional Requirements
Abstract The two types of failure to achieve design functional requirements (FRs) are: Type I, the design cannot hit the FR targets; Type II, it cannot hit them consistently. The causes are due to inter-dependence among the FRs in Type I; and due to ...
2016 / Hilario (Larry) Oh -
Nonlinear signal-based control with an error feedback action for nonlinear substructuring control
Abstract A nonlinear signal-based control (NSBC) method utilises the ‘nonlinear signal’ that is obtained from the outputs of a controlled system and its linear model under the same input signal. Although this method has been examined in numerical...
2016 / Ryuta Enokida, Koichi Kajiwara -
A study on torsional vibration attenuation in automotive drivetrains using absorbers with smooth and non-smooth nonlinearities
Abstract The automotive industry is predominantly driven by legislations on stringent emissions. This has led to the introduction of downsized engines, incorporating turbocharging to maintain output power. As downsized engines have higher combustion ...
2016 / Ahmed Haris, Eliot Motato, Stephanos Theodossiades, Homer Rahnejat, Patrick Kelly, et al. -
Design and Control of a Wearable Stewart Platform-Type Ankle-Foot Assistive Device2012 / Hiroshi Takemura, Takayuki Onodera, Ding Ming, Hiroshi Mizoguchi
-
Robot grasp detection using multimodal deep convolutional neural networks2016 / Z. Wang, Z. Li, B. Wang, H. Liu
-
Parametric Reliability Assurance for Machine-Tools
Abstract The paper considers a complex of measures providing for the diagnosing and forecasting machine-tools technical state. The purpose of the measures consists in supporting the repair strategy based on the diagnostics of the actual technical...
2016 / O. Anikeeva, A. Ivakhnenko, A. Zhirkov -
Review of Identification Methods for Indoor Pollutant Sources
Abstract Source identification has been a challenging research topic in the area of indoor air quality which is an inverse problem in physics and mathematics as the process is to find unknown causes from known consequences. This paper studied a...
2016 / Shui Yu, Lianjie He, Guohui Feng -
Impact of dynamics of the frame on the performance of the positioning servosystem2016 / L. Mikova, A. Gmiterko, P. Frankovsky, D. Hroncova
-
New Approach for a Comprehensive Method for Urban Vehicle Concepts with Electric Powertrain and their Necessary Vehicle Structures
Abstract Due to the strict discussions regarding energy saving and the goal to reduce CO2 emissions to 95 g CO2/km, specified for the year 2020 (BUMD, 2009), there is a strong demand for lighter and lightweight design automotive structures to...
2016 / Marco Münster, Michael Schäffer, Gerhard Kopp, Gundolf Kopp, Horst E. Friedrich -
Modular Platform Design for Mechatronic Systems using Axiomatic Design and Mechatronic Function Modules
Abstract This paper introduces a method for the design of modular product platforms (MPP) for highly integrated mechatronic products applying axiomatic design and a system decomposition into mechatronic function modules (MFM). In the first step,...
2016 / Guenther Schuh, Stefan Rudolf, Stefan Breunig -
Theoretical and experimental studies on in-plane stiffness of container structure with holes2016 / X. Zha, Y. Zuo
-
Conceptual Kinematic Design and Performance Evaluation of a Chameleon-like Service Robot for Space Stations2015 / Marco Ceccarelli, Hui Li, Giuseppe Carbone, Qiang Huang
-
Dynamic modeling of dual-arm cooperating manipulators based on Udwadia-Kalaba equation2016 / J. Liu, R. Liu
-
Adaptive neural dynamic surface sliding mode control for uncertain nonlinear systems with unknown input saturation2016 / Q. Chen, L. Shi, Y. Nan, X. Ren
-
Obstacle Avoidance for Redundant Manipulators Utilizing a Backward Quadratic Search Algorithm2016 / Tianjian Hu, Tianshu Wang, Junfeng Li, Weiping Qian
-
Axiomatic Approach to Flexible and Changeable Production System Design
Abstract The general increase of products’ customization, the reduction of product life cycle spans and dynamically changing markets challenge manufacturers today. Flexible and changeable production equipment addresses these challenges. It is thus...
2016 / Petra Foith-Förster, Marc Wiedenmann, Dennis Seichter, Thomas Bauernhansl