Mechanical engineering topic list of research papers
-
A Small-sized Locating Message for Cooperative Localization under Communication Constraint2016 / Leigang Wang, Tao Zhang, Rongjian Liang
-
Experimental and Numerical Investigation of Flow Distribution within the Heat Exchanger with Elliptical Tubes
Abstract The goal of this article is to validate the CFD simulations of the working fluid flow distribution in individual tubes of fin-and-tube heat exchanger. For this purpose, the CFD simulations have been conducted for the design of the inlet and ...
2016 / Paweł Ocłoń, Stanisław Łopata, Kamil Chłosta -
Compensation of top horizontal displacements of a riser2016 / Iwona Adamiec-Wójcik, Jan Awrejcewicz, Łukasz Drąg, Stanisław Wojciech
-
Stochastic Subspace Method for Experimental Modal Analysis2016 / Dazhi Liu, Shuhong Xiang, Shichao Fan, Ye Li, Zheng Liu, et al.
-
Epicycloidal Versus Trochoidal Milling-Comparison of Cutting Force, Tool Tip Vibration, and Machining Cycle Time
Abstract Among several strategies for high performance cutting, trochoidal milling is an efficient one for roughing process and reduces the cycle times significantly. For maximization of the efficiency and reducing the machining cycle time in the...
2016 / M. Salehi, M. Blum, B. Fath, T. Akyol, R. Haas, et al. -
Comparative Research on the Transmission Form of the Electric Bus
Abstract This paper takes the transmission form of pure electric bus as the research object, models the direct-drive transmission system and AMT (Automated mechanical transmission) system. The economic comparison of the energy consumption is built...
2016 / Wenwei Wang, Rui Hou, Quanqing Yu, Cheng Lin -
Parameter identification algorithm of kinematic calibration in parallel manipulators2016 / Y. Liu, J. Wu, L. Wang, J. Wang
-
Investigation of Adaptive Spindle System with Active Electromagnetic Bearing
Abstract Available motor spindles and tool chucks generate uncontrolled process deviations at several eigenfrequencies leading to geometrical and surface distortions. A demand for highest precision motor spindles, tool chucks and cutting tools...
2016 / Koriath Hans-Joachim, Glänzel Marcel, Bogachev Yury, Sakharova Olga, Klimochkin Kuzma, et al. -
The Expressway Traffic Sign Information Volume Threshold and AGS Position Based on Driving Behaviour
Abstract Reasonable traffic signs are important for ensuring operation safety and efficiency of expressways. The overloaded information of the traffic signs and improper distance ahead of the signs present serious problems, for they may raise the...
2016 / Zhongyin Guo, Zhengmin Wei, Haocheng Wang -
Structural optimization for multiple structure cases and multiple payload cases with a two-level multipoint approximation method
Abstract This paper is to address structural optimization problems where multiple structure cases or multiple payload cases can be considered simultaneously. Both types of optimization problems involve multiple finite element models at each...
2016 / Haichao An, Shenyan Chen, Hai Huang -
Decision-making Analysis of Scheme Selection under Different Preferences
Abstract In the conceptual design stage of new product development, one of the major challenges is how to effectively determine the single best scheme from multiple alternatives. Based on the Axiomatic Design Theory, this paper proposes a new method ...
2016 / Yanjun Hou, Jianjun Qin, Xinlei Li, Yongfeng Liu -
Optimization and simulation of a bionic fish tail driving system based on linear hypocycloid with hydrodynamics2017 / Shu-yan Wang, Jun Zhu, Xin-guo Wang, Qin-feng Li, Hui-yun Zhu, et al.
-
Wake structure and hydrodynamic performance of flapping foils mimicking fish fin kinematics
Abstract Numerical simulations are used to investigate the wake structure and hydrodynamic performance of bionic flapping foils. The study is motivated by the quest to understand the fluid dynamics of fish fins and use it in the underwater...
2016 / Weixing Liu, Ningyu Li, Jinxin Zhao, Yumin Su -
Dynamic and Acoustic Behaviour of Electric Versus Combustion Vehicles
Abstract This paper focuses on the methodologies and tools in use to answer the following research question: Is the dynamic and acoustic behaviour of electric vehicles without consequence in terms of a safe integration into current and future road...
2016 / Isabela Mocanu, Claus Aichinger, Martin Czuka, Andreas Fuchs, Sara Gasparoni, et al. -
Kinematics of a Class of Three-Legged Parallel Manipulators by Means of Screw Theory
Abstract This work is devoted to the velocity and acceleration analyses of a class of three-legged parallel manipulators. The input-output equations of velocity and acceleration are systematically obtained by resorting to reciprocal-screw theory....
2016 / Jaime Gallardo-Alvarado -
Solitary Wave in One-dimensional Buckyball System at Nanoscale2016 / Jun Xu, Bowen Zheng, Yilun Liu
-
Generating a Style-adaptive Trajectory from Multiple Demonstrations2014 / Yue Zhao, Rong Xiong, Li Fang, Xiaohe Dai
-
Analysis of Different Blade Architectures on small VAWT Performance2016 / L. Battisti, A. Brighenti, E. Benini, M. Raciti Castelli
-
The influence of turbulence models on the accuracy of CFD analysis of a reciprocating mechanism driven heat loop
Abstract A bellows-type Reciprocating-Mechanism Driven Heat Loops (RMDHL) is a novel heat transfer device that could attain a high heat transfer rate through a reciprocating flow of the working fluid inside the heat transfer device. Although the...
2016 / Olubunmi Popoola, Yiding Cao -
Research Progress Analysis of Reliability Design Method Based on Axiomatic Design Theory
Abstract With the increasing complexity of the product, the conventional reliability design methods can hardly support the realization of high reliability requirements, and how to carry out high reliability design has become the bottleneck problem...
2016 / Jiang Shao, Fengming Lu, Chenhui Zeng, Ming Xu