Mechanical engineering topic list of research papers
-
An Analysis of Heavy Vehicle Impact on Roundabout Entry Capacity in Japan
Abstract Heavy vehicles behave differently from ordinary passenger cars due to their characteristics such as size and operational performance. At roundabout, entry capacity estimation mainly focuses on passenger cars. In HCM 2010, the impact of...
2016 / Nan Kang, Hideki Nakamura -
Manufacturing of new roughness standards for the linearity of the vertical axis – Feasibility study and optimization
Abstract In order to provide an alternative for the vertical axis calibration of stylus instruments which is usually performed based on step height standards, a new measurement standard geometry for the calibration of the linearity and research on...
2016 / Matthias Eifler, Frank Schneider, Jörg Seewig, Benjamin Kirsch, Jan C. Aurich -
Theoretical Underpinning of Diagnosing the Cylinder Group During Motoring
Abstract This paper analysis and compares the existing methods for diagnosing the cylinder-piston group of an internal combustion engine (ICE). The most promising diagnosis methods are proposed. The developed method allows to combine all the...
2016 / A. Gritsenko, S. Kukov, K. Glemba -
An Active Damping Method for Chatter Vibration in Plunge Grinding Using Electromagnetic Actuators
Abstract Using conventional grinding wheels, self-excited vibrations are one of the most limiting factors in terms of productivity and process stability in cylindrical plunge grinding. Depending on the dynamic behavior of the workpiece and machine,...
2016 / M. Ahrens, M. Dagen, B. Denkena, T. Ortmaier -
Directivity Based Noise Control for an Obliquely Incident Transmission Problem
Abstract The objective of the present work is to improve the transmission loss offered by a barrier separating two acoustic spaces. The barrier is subjected to a low frequency obliquely incident acoustic pressure over one side. A novel concept of...
2016 / Gyanishankar Sharma, Abhijit Sarkar -
The Technique of an Interconnection Problem of the Hydrodynamic Lubrication Theory and the Nonlinear Dynamics for Mechanical Systems “An Elastic Crankshaft on Journal Bearings”
Abstract In this paper a mathematical model and numerical methods for the modeling of the main bearing system of internal combustion engines are suggested. The novelty of the offered approach consists in 1) the modeling of the simultaneous influence ...
2016 / Yu.V. Rozhdestvensky, N.A. Khozeniuk, A.A. Mylnikov -
Repetitive Motion Planning of Free-Floating Space Manipulators2013 / Gang Chen, Long Zhang, Qingxuan Jia, Ming Chu, Hanxu Su
-
Towards a miniature self-propelled jellyfish-like swimming robot2016 / J. Yu, J. Xiao, X. Li, W. Wang
-
Experimental investigation on the performance of an impinging jet solar air heater
Abstract Investigation on an impinging jet solar air heater is performed and reported in this work. The air is supplied through an impinging jet pipe which contains the nozzles to distribute the air in the solar air heater. The air is released from...
2016 / T. Rajaseenivasan, S. Ravi Prasanth, M. Salamon Antony, K. Srithar -
A Systematic Approach to Coupling Disposal of Product Family Design (Part 1): Methodology
Abstract In this paper, on the basis of comparison and analysis on the similarities and differences of design coupling between product family and single product, a systematic approach to coupling disposal of product family design is proposed, and...
2016 / Renbin Xiao, Xianfu Cheng -
Compressive Strength of Steel Frames after Welding with Micro-Jet Cooling2016 / D. Hadryś, T. Węgrzyn, J. Piwnik, Ł. Wszołek, D. Węgrzyn
-
A geometric approach to modeling of four- and five-link planar snake-like robot2016 / T. Liptak, I. Virgala, P. Frankovsky, P. Sarga, A. Gmiterko, et al.
-
Design and modeling of a multi-pole and dual-gap magnetorheological brake with individual currents2016 / J. Wu, X. Jiang, J. Yao, H. Li, Z. Li
-
On the Impact of Recycling Strategies on Energy Demand and CO2 Emissions When Manufacturing Al-based Components
Abstract The industrial world is facing the challenge of reducing emissions by means of energy- and resource-efficient manufacturing strategies. In some cases, the exerted emissions and the energy demands related to conventional manufacturing...
2016 / Paolo C. Priarone, Giuseppe Ingarao, Luca Settineri, Rosa Di Lorenzo -
Simulation of a two-stroke diesel engine for propulsion in waves2016 / Kevin Koosup Yum, Bhushan Taskar, Eilif Pedersen, Sverre Steen
-
Target Tracking for Visual Servoing Systems Based on an Adaptive Kalman Filter2012 / Chang Liu, Xinhan Huang, Min Wang
-
Effects of rail materials and axle loads on the wear behavior of wheel/rail steels2016 / J. Liu, W. Jiang, S. Chen, Q. Liu
-
Influence of Parameter Uncertainties on the Computation of Stability Lobe Diagrams
Abstract To predict stability boundaries of cutting operations models of process forces and dynamic machine behavior are required. Uncertainties of model parameters may lead to significant differences between predicted and measured stability...
2016 / Michael Löser, Knut Großmann -
An Enhanced Tire Model for Dynamic Simulation based on Geometrically Exact Shells2016 / Michael Roller, Peter Betsch, Axel Gallrein, Joachim Linn
-
Design of a mass-customization-based cost-effective Internet of Things sensor system in smart building spaces2016 / S. Park, S. Park, J. Byun, S. Park