Mechanical engineering topic list of research papers
-
Model and Design of a Power Driver for Piezoelectric Stack Actuators2010 / M. Chiaberge, A. Tonoli, G. Botto, M. De Giuseppe, S. Carabelli, et al.
-
Influence of punch radius on elastic modulus of three-point bending tests2016 / P. Hou, H. Zhao, Z. Ma, S. Zhang, J. Li, et al.
-
Rotor Mass Eccentricity Vibration Compensation Control in Bearingless Induction Motor2015 / Z. Yang, D. Dong, H. Gao, X. Sun, R. Fan, et al.
-
Research on Combined Heating Supply System based on Groundwater Heat Pump and Steam Turbine
Abstract In order to achieve high utilization efficiency of residual heat by reducing the energy conversion process, a new combined heat-supply system based on groundwater heat pump and steam turbine was designed. By obtaining operational principle...
2015 / Zhiqiang Kang, Jialin Sun, Xue Yang, Guohui Feng, Hongbo Fan, et al. -
Research of fuel temperature control in fuel pipeline of diesel engine using positive temperature coefficient material2016 / X. Li, Z. Sun, L. Gu, J. Han, J. Wang, et al.
-
An Overall Ship Propulsion Model for Fuel Efficiency Study
Abstract An overall ship propulsion plant involving marine engine, propeller and ship dynamic model was presented in this work. The cycle mean value model was utilized to describe the operation process in engine dynamic, intake/exhaust and...
2015 / Feiyang Zhao, Wenming Yang, Woei Wan Tan, Siaw Kiang Chou, Wenbin Yu -
A Method of Hyper-sphere Cover in Multidimensional Space for Human Mocap Data Retrieval2011 / Xiaopeng Wei, Boxiang Xiao, Qiang Zhang, Rui Liu
-
Thermal analysis of a single-storey livestock barn2016 / J. Hamilton, M. Negnevitsky, X. Wang
-
Prediction and control of front-end curvature in hot finish rolling process2015 / K. Lee, J. Han, J. Park, B. Kim, D. Ko
-
Systems thinking in designing automotive textiles2015 / Pammi Sinha, Subramanian Senthilkannan Muthu, Iain Taylor, Rita Schulze, Katharine Beverley, et al.
-
Fractional flow in radial flow systems: a study for peripheral waterflood2015 / Kegang Ling
-
Study on Tension-Compression Fatigue Properties of Hard Machined Components2015 / T. Chen, X. Liu, S. Li, K. Li
-
Research on the modeling of the impedance match bond at station track circuit in Chinese high-speed railway2015 / S. Yang, Y. Cui, J. Liu, Y. Li
-
Predicting fatigue crack growth under variable amplitude loadings with usage monitoring data2015 / M. J. Pais, N. H. Kim
-
The direct aero-acoustics simulation of flow around a square cylinder using the CE/SE scheme2007 / Min Liu, Jia Bing Wang, Ke-Qi Wu
-
Dynamic Characteristics of a Finite-Width Journal Bearing Lubricated with Powders
Abstract This paper attempts to investigate the dynamic characteristics of a powder lubricated journal bearing. The stiffness and damping coefficients are obtained using finite perturbation method. The stability limit of the rotor speed is obtained...
2016 / Faisal Rahmani, J.K. Dutt, R.K. Pandey -
Scavenge flow analysis of opposed-piston two-stroke engine based on dynamic characteristics2015 / F.-k. Ma, C.-l. Zhao, Z.-f. Zhao, S.-l. Zhang
-
Optimization analysis on assembly interference of cylindrical roller bearings2015 / Z.-h. Ye, L.-q. Wang
-
Numerical simulation of the influence factors for rotary kiln in temperature field and stress field and the structure optimization2015 / G. Li, Z. Liu, G. Jiang, H. Liu, H. Xiong
-
Computational fluid dynamics and experimental study of inter-stage seal clearance on submersible well pump2016 / X. Gao, W. Shi, L. Zhou, D. Zhang, Q. Zhang