Mechanical engineering topic list of research papers
-
Event-based scenario manager for multibody dynamics simulation of heavy load lifting operations in shipyards2016 / Sol Ha, Namkug Ku, Myung-Il Roh
-
Balancing and positioning for a gun control system based on fuzzy fractional order proportional-integral-derivative strategy2016 / Q. Gao, K. Li, Y. Hou, R. Hou, C. Wang
-
FSI Analysis and Fatigue Analysis of BOP Gantry Crane2015 / H. J. Kim, G. N. Kim, C. K. Jeong, Y. G. Jung, S. S. Huh
-
Features of Railway Noise Rationing and Assessment in Housing Estate Territory in Russia
Abstract The comparative analysis of railway noise rationing in Russia and Europe is carried out. Criteria of railway noise assessment are considered in accordance with standards to be entered into last years in Russia and taking into account less...
2015 / Ilya Tsukernikov, Igor Shubin, Nikolay Ivanov, Tatiana Nevenchannaya -
Study of detonation wave contours in EFP warhead
Abstract An analytical model for calculating the propagation time of shock wave in a wave shaper is presented in this study. The calculated results show that the contours of three typical detonation waves, such as conical detonation wave, spherical...
2016 / Xu-dong Zu, Zheng-xiang Huang, Chuan-sheng Zhu, Qiang-qiang Xiao -
Theoretical analysis on nonlinear vibration of fluid flow in single-walled carbon nanotube2016 / P. Valipour, S. E. Ghasemi, Mohammad Reza Khosravani, D. D. Ganji
-
Interval uncertain analysis of active hydraulically interconnected suspension system2016 / J. Liang, J. Wu, N. Zhang, Z. Luo, S. Zhu
-
Motion Editing for Time-Varying Mesh2008 / Jianfeng Xu, Toshihiko Yamasaki, Kiyoharu Aizawa
-
The equivalence of minimum entropy production and maximum thermal efficiency in endoreversible heat engines
Abstract The objective of this study is to investigate the thermal efficiency and power production of typical models of endoreversible heat engines at the regime of minimum entropy generation rate. The study considers the Curzon-Ahlborn engine, the...
2016 / Y. Haseli -
Virtual design software for mechanical system dynamics using transfer matrix method of multibody system and its application2015 / H.-g. Yang, X.-t. Rui, Z.-h. Zhan, J.-s. Zhang, J.-j. Gu, et al.
-
Effect of interference fit size on local stress in single lap bolted joints2015 / Y. Bi, J. Jiang, Y. Ke
-
Metrological solutions for an adapted inspection of parts and tools of a sheet-bulk metal forming process2015 / Steffen Matthias, Andreas Loderer, Sergej Koch, Michael Gröne, Markus Kästner, et al.
-
THE INJURY SEVERITY RATE DIFFERENCES IN PASSENGER CARS AND PICK UP TRUCKS RELATED TWO VEHICLE INVOLVED MOTOR VEHICLE CRASHES IN BRITISH COLUMBIA, CANADA
The effect of large vehicle involvement on motor vehicle crash (MVC) rates and severity has long been a concern in MVC analysis literature. Injuries in drivers and occupants are related to several key factors: the mass of the case vehicle and mass of its collision ...
2014 / E.B.R. DESAPRIYA, I. PIKE, M. BRUSSONI, G. HAN -
Study on Vehicle Delay Based on the Vehicle Arriving Distribution at Entrance Lanes of Intersection
Abstract Through analyzing vehicle arrival distribution at entrance lanes of signalized intersection, established the vehicle arrival distribution model, and then combined with the arrival distribution model, presented delay model of signalized...
2016 / Yan xing, Zhenhai Gao, Zhaowei Qu, Hongyu Hu -
Observer-based stabilization of one-sided Lipschitz systems with application to flexible link manipulator2015 / R. Wu, W. Zhang, F. Song, Z. Wu, W. Guo
-
Fluid-structure interaction study of three-dimensional vehicle model under crosswind2015 / H. Zhu, Y. Zhigang
-
Ride Comfort Analysis of Math Ride Dynamics Model of Full Tracked Vehicle with Trailing Arm Suspension
Abstract A detailed ride mathematical model of a full tracked vehicle, consisting of 17 dof, with trailing arm hydro-gas suspensions, is developed. The non-linear coupled governing differential equations of motion are derived for the sprung mass and ...
2016 / Saayan Banerjee, V. Balamurugan, R. Krishnakumar -
Experimental Investigation of the Grinding Wheel Dynamics in Atherectomy
Abstract This research studies the grinding wheel dynamics in orbital atherectomy – a catheter-based minimally invasive procedure to pulverize plaque in atherosclerotic arteries using a diamond grinding wheel. Experiments were conducted to...
2015 / Yihao Zheng, Barry Belmont, Albert J. Shih -
On Cutting Force Coefficient Model with Respect to Tool Geometry and Tool Wear
Abstract Cutting force models are important for machining processes simulations. This paper presents measurement of cutting forces during C45 (1.0503) carbon steel machining using a coated carbide tool. Various cutting edge geometries and cutting...
2015 / Petr Kolar, Petr Fojtu, Tony Schmitz -
An intuitionistic fuzzy set-based hybrid approach to the innovative design evaluation mode for green products2016 / C.-H. Wang