Mechanical engineering topic list of research papers
-
Numerical investigation on the flow, combustion, and NOX emission characteristics in a 660 MWe tangential firing ultra-supercritical boiler2016 / W. Sun, W. Zhong, A. Yu, L. Liu, Y. Qian
-
“Leg-grope walk”: strategy for walking on fragile irregular slopes as a quadruped robot by force distribution2016 / Yuichi Ambe, Fumitoshi Matsuno
-
On the Effect of an Aggressive Inlet Swirl Profile on the Aero-thermal Performance of a Cooled Vane
Abstract A high-pressure vane equipped with a realistic film-cooling configuration has been studied. The vane is characterized by the presence of multiple rows of fan-shaped holes along pressure and suction side while the leading edge is protected...
2015 / Massimiliano Insinna, Duccio Griffini, Simone Salvadori, Francesco Martelli -
A study on properties of a cone-type brake for motor vehicle winch2016 / D. Li, N. Hu, S. Wang, H. Jiang
-
The analysis of energy consumption and greenhouse gas emissions of a large-scale commercial building in Shanghai, China2016 / X. Wang, C. Huang, Z. Zou
-
Characterization of non-linear bearings using the Hilbert-Huang transform2015 / A. Gonzalez, H. Aied
-
Visualization of heat transport in heat pipes using thermocamera2010 / Patrik Nemec, Alexander Čaja, Richard Lenhard
-
Buckling analysis of thin-walled members via semi-analytical finite strip transfer matrix method2016 / Y. Zhang, B. He, L.-K. Yao, J. Long
-
Guidelines for reducing image retakes of general digital radiography2016 / C.-S. Lin, P.-C. Chan, K.-H. Huang, C.-F. Lu, Y.-F. Chen, et al.
-
Dynamic mechanical response and a constitutive model of Fe-based high temperature alloy at high temperatures and strain rates2016 / Xiang Su, Gang Wang, Jianfeng Li, Yiming Rong
-
Robot Station Optimization for Minimizing Dress Pack Problems
Abstract Problems with robot dress packs are one of the major reasons for online adjustments of robot motions and for down time in robot stations. A factory study showed that many robots wear out more than one dress pack per year. The life length...
2016 / Johan S. Carlson, Jonas Kressin, Tomas Hermansson, Robert Bohlin, Mathias Sundbäck, et al. -
Compound Controller for DC Motor Servo System Based on Inner-Loop Extended State Observer2016 / Jingxian Yang
-
Surface Roughness Analysis on the Dry Turning of an Al-Cu Alloy
Abstract Nowadays, surface finish has become an important indicator of quality and precision in manufacturing processes and it is considered one of the most important parameter in Industry. In this present study, the influence of different machining ...
2015 / A. Torres, I. Puertas, C.J. Luis -
Dynamic Analysis and Controller Design for a Slider-Crank Mechanism with Piezoelectric Actuators
Abstract Dynamic behaviour of a slider–crank mechanism associated with a smart flexible connecting rod is investigated. Effect of various mechanisms’ parameters including crank length, flexibility of the connecting rod and the slider׳s mass on the...
2016 / Samin Akbari, Fatemeh Fallahi, Tohid Pirbodaghi -
Numerical investigation for a hyperbolic annular fin with temperature dependent thermal conductivity
Abstract An annular fin of hyperbolic profile with temperature dependent thermal conductivity is studied by pseudospectral method. Graphs illustrating the effect of fin dimensions, surface convection characteristics and the thermal conductivity...
2016 / M.T. Darvishi, F. Khani, Abdul Aziz -
The Analysis of the Performance of Heating and the Economical Efficiency of the Solar Energy and Gas Heat Pump
Abstract The solar and gas heat pump heating system is a system that combines the gas heat pump and the solar heat pump driven by electricity. On the one hand, the system makes full use of the solar, and it is a real High-efficiency, energy-saving...
2015 / Hong Hao, Junbin Yao, Guohui Feng, Huating Wen -
Analytical Dynamics Based Strategy for Acceleration Control of a Car-like Vehicle Motion
Abstract The paper addresses a dynamics modeling method dedicated to control design for constrained mechanical systems. The constraints may be material, control or task based, provided that they are specified by algebraic or differential equations....
2016 / Elżbieta M. Jarzębowska -
Effect of thermoplastic appliance thickness on initial stress distribution in periodontal ligament2015 / D.-S. Liu, Y.-T. Chen
-
An Improved Flowchart for Gabor Order Tracking with Gaussian Window as the Analysis Window2011 / Yang Jin, Zhiyong Hao
-
Theoretical and experimental studies on dynamics of double-helical gear system supported by journal bearings2016 / M. Yin, G. Chen, H. Su