Mechanical engineering topic list of research papers
-
Performance Analysis of a Double-effect Adsorption Refrigeration Cycle with a Silica Gel/Water Working Pair2010 / Marlinda, Aep Saepul Uyun, Takahiko Miyazaki, Yuki Ueda, Atsushi Akisawa
-
Exergy Assessment of Recovery Solutions from Dry and Moist Gas Available at Medium Temperature2012 / Fadhel Ayachi, Elias Boulawz Ksayer, Pierre Neveu
-
Driver Assistance System for Passive Multi-Trailer Vehicles with Haptic Steering Limitations on the Leading Unit2013 / Jesús Morales, Anthony Mandow, Jorge Martínez, Antonio Reina, Alfonso García-Cerezo
-
Numerical Simulation of Tonal and Broadband Hydrodynamic Noises of Non-Cavitating Underwater Propeller2014 / B. Mousavi, A. Rahrovi, S. Kheradmand
-
Design of Pinion Machine Tool-settings for Spiral Bevel Gears by Controlling Contact Path and Transmission Errors
Abstract This paper proposes a new approach to design pinion machine tool-settings for spiral bevel gears by controlling contact path and transmission errors. It is based on the satisfaction of contact condition of three given control points on the...
2008 / Cao Xuemei, Fang Zongde, Xu Hao, Su Jinzhan -
Modeling In-Cylinder Water Injection in a 2-Stroke Internal Combustion Engine
Abstract In this study, we apply Computational Fluid Dynamics (CFD) models in investigating the effect of injecting water into the combustion chamber of a 2-stroke Internal Combustion Engine (ICE). Using the commercial code, Star-CD, 3-D models for...
2015 / Mohamed I. Hassan, Ayoola T. Brimmo -
Design and Inspection of Multi-fixturing Pallets for Mixed Part Types
Abstract Over the last decades, manufacturing market has been characterized by small batch size, high variability in the part types and part type demand, continuous evolution of the products. In order to quickly answer the new and changing...
2015 / Stefania Pellegrinelli, Claudio Cenati, Luca Cevasco, Franca Giannini, Katia Lupinetti, et al. -
Numerical investigation of the acceleration performance of a thermally choked ram accelerator2015 / Z. Zhuang, X. Sun, Z. Chen
-
Analysis of heat exchanger network for temperature fluctuation2015 / J. Zunlong, D. Wang, X. Wei, Y. Wang
-
Standardization in the Sphere of Vibrodiagnostic Monitoring of Piston Compressors
Abstract The current Russian and the International standards in the field of standardizing parameters for piston machines vibration including piston compressors are reviewed. It is shown that the current standards do not meet safe operation...
2015 / V.N. Kostyukov, A.P. Naumenko -
UAV feasible path planning based on disturbed fluid and trajectory propagation
Abstract In this paper, a novel algorithm based on disturbed fluid and trajectory propagation is developed to solve the three-dimensional (3-D) path planning problem of unmanned aerial vehicle (UAV) in static environment. Firstly, inspired by the...
2015 / Peng Yao, Honglun Wang, Zikang Su -
The influence of selected design and operating parameters on the dynamics of the steam micro-turbine2015 / Grzegorz Żywica, Jan Kiciński
-
Technoeconomic Design of a Micro Gas-turbine for a Solar Dish System
Abstract An integrated approach for the design of a custom-tailored hybrid solar MGT with an integrated solar receiver for the use in a small-scale solar dish unit is presented in order to overcome the inherent limitations of adapting a MGT in the...
2015 / G. Ragnolo, L. Aichmayer, W. Wang, T. Strand, B. Laumert -
A throttle-less single-rod hydraulic cylinder positioning system: Design and experimental evaluation2015 / E. Jalayeri, A. Imam, Z. Tomas, N. Sepehri
-
Limit equilibrium analysis of translational failure of landfills under different leachate buildup conditions
Abstract Excessive leachate levels in landfills can be a major triggering mechanism for translational failure. The scope of this paper is to present the development of the calculation methods for limit equilibrium analysis of translational failure...
2015 / Qian Xuede -
Residual Stresses at Laser Surface Remelting and Additive Manufacturing
Abstract A thermo-elastic model for calculation of the residual stresses is proposed and experimentally validated. Residual stresses depend on the shape of the remelted domain but are independent of its size. The maximum tensile residual stresses...
2011 / A.V. Gusarov, M. Pavlov, I. Smurov -
Temporal Pattern Analysis of Beijing Traffic Guidance Information Released by VMS
Abstract From a statistical point of view, temporal pattern of traffic guidance information under abnormal traffic events is analyzed. Abnormal traffic events include traffic accidents, breakdown vehicles, traffic control, road maintenance and bad...
2013 / Lingling Fan, Shaokuan Chen, Wei Guan -
Collector Efficiency in Downward-Type Internal-Recycle Solar Air Heaters with Attached Fins2013 / Ho-Ming Yeh, Chii-Dong Ho
-
Design Methodology for Mechatronic Active Fixtures with Movable Clamps
Abstract A new fixture layout design methodology for a novel concept of adaptive machining fixtures, with both actively controlled clamping forces and a dynamically adjustable layout, is proposed. The methodology aims at minimising the deflection of ...
2012 / T. Papastathis, O. Bakker, S. Ratchev, A. Popov -
Experimental Analysis of a Turbo-charged Common-rail Diesel Engine Fueled with Biodiesel
Abstract In an effort to evaluate the effect of biodiesel fuel on engine performance and emission, experiments are conducted based on a turbo-charged common-rail diesel engine. Results show that the injection timing can be slightly retarded when...
2015 / Chih-Cheng Chou, Ying-Wei Lin, Chia-Jui Chiang, Yong-Yuan Ku