Mechanical engineering topic list of research papers
-
Constitutive Investigation on Viscoelasticity of PolyVinyl Butyral: Experiments Based on Dynamic Mechanical Analysis Method2014 / Bohan Liu, Jun Xu, Yibing Li
-
Study on Thermal-Hydraulic Behavior of an Integral Type Reactor under Heaving Condition2014 / Beibei Feng, Xingtuan Yang, Shengqiang Li, Yanfei Sun, Jiyuan Tu, et al.
-
Adaptive Failure Identification for Healthcare Risk Analysis and Its Application on E-Healthcare2014 / Kuo-Chung Chu, Lun-Ping Hung
-
Spillways Scheduling for Flood Control of Three Gorges Reservoir Using Mixed Integer Linear Programming Model2014 / Maoyuan Feng, Pan Liu
-
Experimental and finite element studies on free vibration of cylindrical skew panels2014 / Chikkol V Srinivasa, Yalaburgi J Suresh, Wooday P Prema kumar
-
A hybrid meta-heuristic algorithm for the vehicle routing problem with stochastic travel times considering the driver's satisfaction2012 / Reza Tavakkoli-Moghaddam, Mehdi Alinaghian, Alireza Salamat-Bakhsh, Narges Norouzi
-
Cooperative emergency braking warning system in vehicular networks2015 / Ming-Fong Tsai, Yung-Cheng Chao, Lien-Wu Chen, Naveen Chilamkurti, Seungmin Rho
-
Geometric Error Modeling of Machine Tools Based on Screw Theory
Abstract In order to build an linear, high computational efficiency geometric error model for machine tools, a new error modeling method based on screw theory is presented. Geometrical error sources are expressed as error twists, and the integrated...
2011 / Zhao Yu, Li Tiemin, Tang Xiaoqiang -
The effect and prediction of temperature on adsorption capability of coal/CH4
Abstract Based on adsorption isotherm experiment on two coal samples under different temperatures using the HCA adsorption parameters determinator, the effect of temperature on adsorption capability of coal/CH4 was analyzed. The prediction of...
2011 / Shaojie Chen, Longzhe Jin, Xuexi Chen -
An IDEF0 Design For PDM-based Die Integrated Intelligent Design System Functional Model
Abstract This paper establishes a PDM–based integrated design system IDEF0 functional model. The system consist four charts: A-0 chart, A0 chart, A1chart and A2chart. A-0chart defines the range of the system; A0 chart includes 4 modules (task...
2011 / Dong Linfeng, Guo Qiang, Wang Lin -
Matlab/Simulink-Based Research on Maximum Power Point Tracking of Photovoltaic Generation
Abstract In order to improve the output efficiency of PV system, A novel variable step size perturbation and observation (P&O) method is proposed to track the maximum power point of PV system. Based on the mathematical model of PV system, this...
2012 / Lijun Qin, Xiao Lu -
Preliminary Research on Distributed Cluster Monitoring of G/S Model
Abstract In the G/S model, the distributed server cluster is responsible for providing spatial data management and information sharing. Monitoring is the main task of cluster management. This paper studied the implementation of current cluster...
2012 / Yang Wenhui, Meng Antai, Miao Fang, Tan Li -
Productivity improvement of a motor vehicle inspection station using motion and time study techniques
Abstract This research was carried out at the Motor Vehicle Periodic Inspection (MVPI) station to improve and enhance the bottleneck inspection point by using different applications to reduce the inspection time. The main problem of this research...
2011 / Khalid S. Al-Saleh -
Multi Revolution Finite Element Model to Predict Machining Induced Residual Stresses in Inconel 718
Abstract Inconel 718 is commonly used in structural critical components of aircraft engines due to its mechanical thermal properties at high temperatures, which makes it to be considered as a difficult to machine material. In these critical parts,...
2013 / A. Kortabarria, P.J. Arrazola, K. Ostolaza -
Wireless Monitoring of Automobile Tires for Intelligent Tires2008 / Ryosuke Matsuzaki, Akira Todoroki
-
Adaptronic Ball Screw for the Enhancement of Machine Precision
Abstract Ball screws are the most common elements in machine tools for transferring rotational into linear movements. Within an electromechanical machine tool axis, ball screws belong to the decisive components for achieving small positioning...
2012 / J. Fleischer, S. Herder -
Purification Characteristic Research of Carbon Dioxide in Mine Refuge Chamber
Abstract Refuge chamber is a kind of rescue equipment that protects trapped miners waiting for rescue in mine accidents. When a refuge chamber is in refuge state, carbon dioxide scrubbing is an important function of the environmental control system...
2011 / Jing Li, Long-zhe Jin, Sheng Wang, Shu-ci Liu, Shu Wang -
Evaluation of Emergency Planning for Water Pollution Incidents in Reservoir Based on Fuzzy Comprehensive Assessment
Abstract The main purpose of the study is to assess whether emergency plan is capable to deal with sudden water pollution, as well as to make available the results of the study to the relevant public officials for emergency management. This paper...
2010 / C.Y. Cheng, X. Qian -
Research of Working Process of Combined Centrifugal-Centripetal Stage by Numeral and Physical Experiments
Abstract The example of performance of numerical and physical experiment by definition of power parameters of the combined centrifugal-centripetal stage and its separately centripetal part is considered in the work.
2012 / Dmitrij Kaznienko -
Designing Radial Sliding Bearing Equipped with Hydrostatically Suspended Pads
Abstract Operating experience indicates that the installation of the damping bearings with the hydrostatic self generative oil film can increase the unity reliability and efficiency, reduce vibration levels, including under transient and...
2012 / V. Martsinkovsky, V. Yurko, V. Tarelnik, Yu. Filonenko