Mechanical engineering topic list of research papers
-
Two-way green wave optimization control method of artery based on partitioned model2016 / L. Wang, K. Pan, W.-w. Guo, X.-m. Liu, D. Wu
-
Calculating the Failure Intensity of a Non-coherent Fault Tree Using the BDD Technique2004 / Sally Beeson, John Andrews
-
Size-Dependent Dynamic Behavior of a Microcantilever Plate2012 / Xiaoming Wang, Fei Wang
-
High Power Selective Laser Melting (HP SLM) of Aluminum Parts
Abstract Selective Laser Melting (SLM) is one of the Additive Manufacturing (AM) technologies that enables the production of light weight structured components with series identical mechanical properties without the need for part specific tooling or ...
2011 / D. Buchbinder, H. Schleifenbaum, S. Heidrich, W. Meiners, J. Bültmann -
Mathematical Simulation on Self-tuning Fuzzy Controller for Small Cylindrical Object Navigating near Free-surface
Abstract Based on the adaptive fuzzy control theory, a self-regulating fuzzy controller is designed for a small cylindrical object navigating near free-surface to minimize wave disturbance and to keep the object move in the desired depth. First, the ...
2011 / Shao Zhiyu, Fang Dongyang, Feng Shunshan -
Optimization of the high-frequency torsional vibration of vehicle driveline systems using genetic algorithms2011 / A. Farshidianfar, M. Ebrahimi, H. Rahnejat, M. T. Menday, M. Moavenian
-
Simultaneous Intrinsic and Extrinsic Parameter Identification of a Hand-Mounted Laser-Vision Sensor2011 / Jong Kwang Lee, Kiho Kim, Yongseok Lee, Taikyeong Jeong
-
Characterization of the Bell-Shaped Vibratory Angular Rate Gyro2013 / Liu Ning, Su Zhong, Li Qing, Fu Yin, Liu Hong, et al.
-
Choosing and Using a Plant DNA Barcode2011 / Peter M. Hollingsworth, Sean W. Graham, Damon P. Little
-
Influence of In-Plane Dynamics of Thin Compression Rings on Friction in Internal Combustion Engines2012 / C. E. Baker, S. Theodossiades, H. Rahnejat, B. Fitzsimons
-
Path Planning for Spray Painting Robot of Workpiece Surfaces2013 / Wei Chen, Dean Zhao
-
Mechanical Characteristics of 6063 Aluminum-Steel Dust Composite2012 / S. O. Adeosun, E. I. Akpan, O. I. Sekunowo, W. A. Ayoola, S. A. Balogun
-
Rapeseed Oil Monoester of Ethylene Glycol Monomethyl Ether as a New Biodiesel2011 / Jiang Dayong, Wang Xuanjun, Liu Shuguang, Guo Hejun
-
CFD Parametric Studies for Global Performance Improvement of Open Refrigerated Display Cabinets2012 / Pedro Dinis Gaspar, L. C. Carrilho Gonçalves, R. A. Pitarma
-
A Review Study on Traction Energy Saving of Rail Transport2013 / Xuesong Feng, Hanxiao Zhang, Yong Ding, Zhili Liu, Hongqin Peng, et al.
-
Experimental Characterisation of the Far-Field Noise in Axial Fans Fitted with Shaped Tip End-Plates2012 / S. Bianchi, A. Corsini, A. G. Sheard
-
Evaluation and Optimization of an Innovative Low-Cost Photovoltaic Solar Concentrator2011 / Franco Cotana, Federico Rossi, Andrea Nicolini
-
Airflow and Heat Transfer in the Slot-Vented Room with Radiant Floor Heating Unit2012 / Xiang-Long Liu, Guang-Cai Gong, Heng-Sheng Cheng, Li-Xing Ding
-
CFD Prediction and Experimental Measurement of Blade Water Coverage in a Diesel Turbocharger2012 / Jun Yao, Yufeng Yao
-
An Investigation of Structural Damage Location Based on Ultrasonic Excitation-Fiber Bragg Grating Detection2013 / Yuegang Tan, Li Cai, Bei Peng, Lijun Meng