Mechanical engineering topic list of research papers
-
Study on Ventilators Monitoring and Early Fault Warning System in Non-Coal Mines
Abstract In view of the approaches of non-coal mines ventilation and the characters of ventilators arrangement, a ventilators monitoring and early fault warning system was developed by using the advanced embedded computer and sensors technologies....
2011 / Xing Yunfeng, Li Chengwu, Huang Huang -
Study on Early Warning Model of Coal Mining Engineering with Fuzzy AHP
Abstract The safety issue of coal mining engineering is very important to coal industry. According to our coal mine enterprises’ safe characteristics, this paper analyzed the risk factors of coal mining engineering and studied the safety problem of...
2012 / Zhigang Yan, Xueli Wang, Yingchun Fu -
Empirical Study on Relationship among the Lane-Changing, Speed and Traffic Flow
Abstract Lane-changing behavior in weaving segment of urban expressway in transportation engineering is a significant factor contributing to the loss of capacity. This paper attempts to analyze the statistical relationships among lane-changing,...
2011 / Han Xie, Yangsheng Jiang, Luxi Zhang -
Legitimating industrial design as an academic discipline in the context of an Australian Cooperative Centre
Abstract Industrial design, unlike its counterpart fields in the product design process such as engineering and material science, is a recent player in the field of academic higher education. In many schools of design, industrial design remains a...
2010 / Gavin Melles, Blair Kuys -
Smart Roadside System for Driver Assistance and Safety Warnings: Framework and Applications2011 / Jeong Ah Jang, Hyun Suk Kim, Han Byeog Cho
-
Structural damage identification using signal processing method2013 / Mallikarjuna D Reddy, Seetharaman Swarnamani
-
Economical Optimization for Double-stage LiBr Absorption Heat Pumps
Abstract The internal parameters of double-stage absorption heat pump, such as evaporator temperature T0, condenser temperature Tk, absorber temperature Ta, the concentration difference of second-stage generatorΔξ2, the solution heat exchangers...
2012 / Yang Xiaojing, You Shijun, Zhang Huan -
Application of Detecting Part's Size Online Based on Machine Vision
Abstract In order to use a method untouched to measure part's size, detection system is built. The research is on characteristic point detection, CCD camera calibration and distance detection between two special points. Firstly, the theory of edge...
2012 / Tian Yuan-yuan, Liu Si-yang, Tan Qing-chang -
Design, Development and Testing of a Large Capacity Annular Linear Induction Pump
Abstract Electromagnetic Pumps have been used for pumping liquid sodium in auxiliary circuits such as fill and drain and purification circuits of sodium cooled fast breeder reactors. Despite their low efficiency these pumps are used in fast reactors ...
2011 / Prashant Sharma, L.S. Sivakumar, R. Rajendra Prasad, D.K. Saxena, V.A. Suresh Kumar, et al. -
Thermal Model of the Casting Process of Functionally Graded Composites2013 / R. Przyłucki, S. Golak
-
Wideband Vibration Control in Multi Degree of Freedom System: Experimental Verification Using Labview
Abstract The attenuation of vibration in a multi degree of freedom system is presented in this paper. The objective is to employ the instrumentation capability of LabVIEW in the implementation of an Active Dynamic Vibration Absorber (ADVA). To...
2012 / Ismail L. Ladipo, Asan G.A. Muthalif -
A method for evaluating the vibrational response of racing bicycles wheels under road roughness excitation
Abstract The aim of the work was the development of a method for measuring and comparing the vibrational response of different racing rear wheels to the excitation caused by riding on irregular road surfaces. Four different rear wheels were selected ...
2012 / Federico Giubilato, Nicola Petrone -
Modeling of Energy Extraction in Vapor Absorption Refrigeration System
Abstract There is energy, where the weak solution flows form generator to condenser and it is extracted by implementing the turbine. The super heater is used to make the ammonia vapor to superheated state to run the turbine and exit is still...
2012 / R. Shankar, T. Srinivas -
Influence of Gap Between Driving Wheel and Corps on Characteristics of Jet-Reactive Turbine
Abstract The results of the starting mode experimental researches are presented, and no-load mode of jet-reactive turbine are demonstrated too. Qualitative and quantitative influence of gap between driving wheel and corps on characteristics of...
2012 / Sergej Vanyeyev, Aleksandr Berezhnoi -
Iris Boundary Localization Method Based on Polar Coordinate
Abstract Iris boundary looks like a circle in shape and the formula of circle is very simple in polar coordinates, so an iris boundary localization method based on polar coordinate is proposed in this paper. The main steps include extracting binary...
2012 / Qichuan Tian, Lanfang Zhang, Xiaojia Wu -
A Study on Dynamic Collision Detection of Armored Vehicle in Visual Simulation
Abstract Under the visual simulation, some cases often are happened such as an armored vehicle penetrating or penetrating through other entities. However, the various existed bounding box models can’t resolve this trouble well. A bounding box method ...
2012 / Meng Qinghua, Gao Wei, Guo Xi, Li Qiuyan -
Numerical Simulation of Turbine Blade Cooling via Jet Impingement
Abstract Various industrial applications use jet impingement against surface to provide an effective mode of heat transfer. Its application includes, but not limited to, heat treatment, thermal management of optical surfaces for defogging, cooling...
2015 / Abdulla R. Al Ali, Isam Janajreh -
In-Cylinder Air Flow Characteristics Generated by Guide Vane Swirl and Tumble Device to Improve Air-Fuel Mixing in Diesel Engine Using Biodiesel
Abstract In order to improve a naturally aspirated (NA) Compression Ignition (CI) engine operating on biodiesel fuel, this research proposes a Guide Vane Swirl and Tumble Device (GVSTD) inside the intake runner of a HINO W04D diesel engine to...
2013 / Idris Saad, S. Bari, S.N. Hossain -
Experimental investigation of thermal loading of a horizontal thin plate using infrared camera
Abstract This study reports the results of experimental investigations of the characteristics of thermal loading of a thin plate by discrete radiative heat sources. The carbon–steel thin plate is horizontally located above the heat sources....
2013 / M.Y. Abdollahzadeh Jamalabadi -
Airworthiness Consideration in Improvement of Air System of Jet Engine Design
Abstract In this paper, according to the engine requirements of airworthiness provisions about cooling system in CCAR 33, the modification of the design method of air system in jet engine is proposed, in which the accuracy of characteristics...
2011 / Hou Shengping