Mechanical engineering topic list of research papers
-
Flight dynamics modeling of a small ducted fan aerial vehicle based on parameter identification
Abstract This paper presents a simple and useful modeling method to acquire a dynamics model of an aerial vehicle containing unknown parameters using mechanism modeling, and then to design different identification experiments to identify the...
2013 / Zhengjie Wang, Zhijun Liu, Ningjun Fan, Meifang Guo -
Design of a Hydraulic Front Brake Handle for Large Displacement Motorcycles
Abstract The objective of this work has been the design of a front brake handle for large displacement motorcycles. A design methodology that examines the most important facets associated to the development process and final use of this mechanism...
2013 / J.L. Santolaya, J. Sevil, R. Miralbés -
A Method of Construction of Index System for Highway Maintenance Management
Abstract The construction of the road network in china is almost finished and the maintenance of the road is getting more and more important nowadays. A scientific and properly way of management of the highway maintenance is a critical challenge to...
2013 / Jie Zhu, Zhang Chen, Li-jun Sun -
Centrifugal Compressor Spiral Dry Gas Seal Simulation Working at Reverse Rotation
Abstract Unidirectional dry gas seal may experiences reverse rotation when equipped in a centrifugal compressor. This paper describes how the reverse rotation effects on the spiral unidirectional dry gas seal performance and pressure distribution...
2014 / Ibrahim Shahin, Mohamed Gadala, Mohamed Alqaradawi, Osama Badr -
Influence of Different Rotor Teeth Shapes on the Performance of Flux Switching Permanent Magnet Machines Used for Electric Vehicles2014 / Jing Zhao, Yashuang Yan, Bin Li, Xiangdong Liu, Zhen Chen
-
Mathematical modeling of heat transfer in closed two-phase thermosyphon2014 / Atlant Nurpeiis
-
Damage detection of flexural structural systems using damage index method – Experimental approach
Abstract In the framework of structural health monitoring, continuous dynamic records are essential for good judgment of structures. Overall degradation of structures can be obtained with reasonable accuracy using various system identification...
2015 / Atef Eraky, Ahmed M. Anwar, Alaa Saad, Ayman Abdo -
A Method for Negotiating Various Customer Requirements for Public Service Design2013 / Yoshiki Shimomura, Yutaro Nemoto, Fumiya Akasaka, Koji Kimita
-
Increase of power and efficiency of the 900 MW supercritical power plant through incorporation of the ORC2014 / Paweł Ziółkowski, Dariusz Mikielewicz, Jarosław Mikielewicz
-
Aerodynamic characteristics of NACA 4412 airfoil sction with flap2015 / Alex E. Ockfen, Konstantin I. Matveev
-
Optimization of Power Train and Control Strategy of a Hybrid Electric Vehicle for Maximum Energy Economy
Abstract A solution to increase fuel economy in Hybrid Electric Vehicles derived from physical characteristics of the vehicle, the powertrain and the control strategy is presented. A heuristic Control Map is created to analyze the restrictions and...
2015 / C. Osornio-Correa, R.C. Villarreal-Calva, J. Estavillo-Galsworthy, A. Molina-Cristóbal, S.D. Santillán-Gutiérrez -
Dynamic Coupled Systems FHA: A Simulation-aided Approach
Abstract It is difficult to apply experience in dynamic coupled systems functional hazard assessment (FHA), for the failure chain of Dynamic coupled systems (DCS) is often long and complex. The aim of this paper is to establish a more detailed...
2014 / Shuiting Ding, Tian Qiu, Xiaofeng Liu, Shuguang Zhang -
Flutter Influence Mode Analysis of High Speed Wing Model
Abstract In flutter wind tunnel test, the matching degree between scaled model and prototype would directly affect the reliability of test results. It is difficult to achieve completely dynamic similarity because of some material or technological...
2015 / Zhao Ling, Ji Chen, Yang Yinong, Liu Ziqiang -
Comparison of influencing factors of diesel with crude rice bran oil methyl ester in multi response optimization of NOx emission
Abstract The main objective of the present work was to reduce the higher NOx emission of a stationary engine fueled with diesel with less increase in smoke density and compare the results with that of crude rice bran oil methyl ester (CRBME). Design ...
2014 / S. Saravanan, G. Nagarajan -
Performance Characteristic of Indirect Diesel Engine Fuelled with Diesel-bioethanol Using Uniplot Software
Abstract The use of bioethanol as supplementary fuel for diesel engine has widely been used and result a positive effect. This paper shows the performance map of indirect diesel engine fuelled with diesel bioethanol emulsion. Experiment was carried...
2015 / Arifin Nur, Y. Putrasari, W.B. Santoso, Tony Kosasih, I.K. Reksowardojo -
BASIC STUDY ON TAILORMADE BRAKING SUPPORT SYSTEM
It is desirable for driving support systems to improve the safety of driver vehicle systems, and at the same time to have a performance that does not make individual drivers feel uncomfortable. Since human beings have various control characteristics, any system...
2014 / Toshiya HIROSE, Toichi SAWADA, Yasuhei OGUCHI -
Effect of Nanoadditives with Surfactant on the Surface Characteristics of Electroless Nickel Coating on Magnesium-Based Composites Reinforced with MWCNT2013 / Ranganathan Dhinakaran, Rasu Elansezhian, Arunachalam Arumugam Lalitha
-
Robust Adaptive PID Control of Robot Manipulator with Bounded Disturbances2013 / Jian Xu, Lei Qiao
-
Fracture Analysis of Brittle Materials Based on Nonlinear FEM and Application in Arch Dam with Fractures2013 / Yuanwei Pan, Yaoru Liu, Zhixiong Cui, Xin Chen, Qiang Yang
-
Traffic Noise Propagating from Vibration of Railway Wagon2013 / Shao-Yi Hsia, Yu-Tuan Chou