Mechanical engineering topic list of research papers
-
Quality Improvement and Robust Design Methods to a Pharmaceutical Research and Development2012 / Byung Rae Cho, Sangmun Shin
-
Control of Groundwater Remediation Process as Distributed Parameter System2015 / M. Mendel, T. Kovács, G. Hulkó
-
Transported PDF Modeling of Ethanol Spray in Hot-Diluted Coflow Flame2015 / Likun Ma, Bertrand Naud, Dirk Roekaerts
-
Design of Rocket Engine for Spacecraft Using CFD-Modeling
Abstract This paper describes the designing process of rocket engine with thrust 25N for system of orientation and starting of spacecraft instead the prototype with burnout chamber defect that was not fixed during the development to completely...
2015 / Vasiliy Zubanov, Vitaliy Egorychev, Leonid Shabliy -
Game Model for “Shortage of Logistics” in Online Shopping in Service Engineering
Abstract This paper analyzes the imbalance between e-commerce and logistics service by using factor sub-game perfect Nash equilibrium as an analytical tool from the view of system and links up the bargaining process between sellers and express...
2012 / Haoxiong Yang, Mengnan Zhang, Jing Wang, Xinjian Du -
Transit Vehicles Intelligent Scheduling Optimization Based on the Division of Characteristic Periods
Abstract Vehicle scheduling problem (VSP) is a vital part of the bus scheduling scheme based on the bus timetables. In this paper, the various basic problems that influence the vehicle scheduling scheme are analyzed. Then, the characteristic periods ...
2013 / Xu Zhoucong, He Peijia, Teng Jing, Liu Liping -
High-Speed Spindle Fault Diagnosis with the Empirical Mode Decomposition and Multiscale Entropy Method2015 / Nan-Kai Hsieh, Wei-Yen Lin, Hong-Tsu Young
-
Grey Forecast Rainfall with Flow Updating Algorithm for Real-Time Flood Forecasting2015 / Jui-Yi Ho, Kwan Lee
-
Pressure Measurement on Suction Surface of a Single Vane Using Pressure-sensitive Paint
Abstract Global pressure distribution on the suction surface of a single vane in a transonic cascade wind tunnel is measured with the help of intensity-based pressure-sensitive paint (PSP) technique using a type of temperature-insensitive...
2009 / Qiang Zhou, Bo Liu, Limin Gao, Liusheng Chen, Miao Shi -
Multi-frequency RCS Reduction Characteristics of Shape Stealth with MLFMA with Improved MMN
Abstract Three new control factors are presented for calculating the multipole mode number (MMN) efficiently and precisely. The effects of these control factors on the number of integral samples and the precision of multilevel fast multipole...
2010 / Liu Zhanhe, Huang Peilin, Gao Xu, Li Ying, Ji Jinzu -
Three-dimensional flow instability in a lid-driven isosceles triangular cavity2011 / L. M. GONZÁLEZ, M. AHMED, J. KÜHNEN, H. C. KUHLMANN, V. THEOFILIS
-
Experimental and Computational Investigations for Combustion, Performance and Emission Parameters of a Diesel Engine Fueled with Soybean Biodiesel-Diesel Blends
Abstract In this work experimental and theoretical investigations were carried out on a single cylinder, direct injection diesel engine operating on different blends of a soybean methyl ester (SME) with diesel fuel. The effect of blending on the...
2014 / Mohamed F. Al_Dawody, S.K. Bhatti -
Experimental and Numerical Study of a Micro-cogeneration Stirling Engine for Residential Applications
Abstract Micro-cogeneration Stirling engines are considered promising for residential applications. The present work covers the experimental and numerical analysis of a commercial Stirling unit capable of 8kW of hot water and 1kW of electricity. A...
2014 / Gianluca Valenti, Paolo Silva, Nicola Fergnani, Gioele Di Marcoberardino, Stefano Campanari, et al. -
Exploring Impacts of Countdown Timers on Queue Discharge Characteristics of Through Movement at Signalized Intersections
Abstract Red signal countdown timer can show drivers the time remaining until the onset of the green phase. Drivers waiting in the queue at the intersection are aware of the upcoming green phase start, and are likely to respond more quickly. Thus,...
2013 / Sun Wenbo, He Zhaocheng, Xia Xi, Xu Feifei -
Theoretical Study of the Effect of Spray Inclination on Spray Cooling for Large-scale Electronic Equipment
Abstract Spray cooling, as a high efficient and energy-saving cooling method, is expected to be a competitive cooling solution for large-scale electronic device in the future. Lots of theoretical and experimental research on spray cooling has been...
2013 / Peng Zhang, Lin Ruan -
Systematic Infusion of Creativity in Engineering Design Courses
Abstract Earlier studies have shown that the level of creativity of the fourth year students of the Mechanical Engineering and Manufacturing Engineering Programmes at the Universiti Kebangsaan Malaysia are low to average, as reflected in the...
2011 / Juridah Johari, Dzuraidah Abd Wahab, Jaafar Sahari, Shahrum Abdullah, Rizauddin Ramli, et al. -
Generating Parametric Gn Blending Surface with Some Constraints
Abstract This paper presents a method of generating a parametric Gn blending surface based on reparameterizing the partial surface patches in the base surfaces on the basis of Erich Hartmann method. This method is expressed as...
2011 / Qiu-zhi SONG, Quan-hui DAI, Li-ping CHEN, Yi-fang ZHONG -
Design and experimental study of a micro-groove grinding wheel with spray cooling effect
Abstract The effectiveness of grinding fluid supply has a crucial impact on grinding quality and efficiency in high speed grinding. In order to improve the cooling and lubrication, through in-depth research of self-inhaling internal cooling method...
2013 / Chaofeng Shi, Xun Li, Zhitong Chen -
Design Scheme of Public Transport Comprehensive Dispatching MIS based on MAS
Abstract A MAS (Multi-agent system) is made from independent and interactional multi-agents with some attributes: independence, adaptability, consecution, better cognition ability with actively openness, etc. Public Transport Comprehensive...
2013 / QIAN Runhua, CONG Hua, ZHAO Ruiling, LI Yuanxing -
A Multi-Zone Model of the Combustion Process in an Si Engine as an External Cylinder of the Gt-Power Simulation Tool2015 / Jiří Hvězda