Mechanical engineering topic list of research papers
-
Autonomous, Distributed Parking Lot Vacancy Management Using Intervehicle Communication2014 / Shohei Yamashita, Kazumasa Takami
-
Evaluation of the Response of Posttensioned Steel Frames with Energy Dissipators Using Equivalent Single-Degree-of-Freedom Systems2014 / J. Luz Rivera, Arturo López-Barraza, Sonia E. Ruiz, Alfredo Reyes-Salazar
-
Effects of AC Coils Parameters on Transduction Efficiency of EMAT for Steel Plate Inspection2014 / Xiaochun Song, Yawu Wang
-
A Hybrid Metaheuristic-Based Approach for the Aerodynamic Optimization of Small Hybrid Wind Turbine Rotors2014 / José F. Herbert-Acero, Jaime Martínez-Lauranchet, Oliver Probst, Santos Méndez-Díaz, Krystel K. Castillo-Villar, et al.
-
Trip Travel Time Forecasting Based on Selective Forgetting Extreme Learning Machine2014 / Zhiming Gui, Haipeng Yu
-
Modeling of highway access weight: Effects on speed and lateral variation2015 / W. Lu, J. J. Lu, C. Wang, Y. Jiang, S. Chen
-
Non-dimensional correlations on flame height and axial temperature profile of a buoyant turbulent line-source jet fire plume2014 / X. Zhang, L. Hu, X. Zhang, L. Yang, S. Wang
-
Development of a multi-objective scheduling system for offshore projects based on hybrid non-dominated sorting genetic algorithm2015 / J. Li, B. Yang, D. Zhang, Q. Zhou, L. Li
-
Distributed State Fusion Kalman Predictor Based on WLS Algorithm
Abstract Based on the weighted least square (WLS) algorithm, a unified multisensor distributed state fusion estimation criterion is presented in this paper, which includes the optimal weighted fusion algorithms weighted by matrices, scalars and...
2012 / Xiaojun Sun, Guangming Yan -
Investigation of solid structure obstacles influence on flame propagation in semi-open tube
Abstract By means of applying self-designed experimental system for flame acceleration, the paper investigated solid structure, blockage ratios, spatial layout and ignition distance of obstacles influence on flame speed and overpressure. In the...
2011 / Ding Yibin, Xiao Fuquan, Xuan Xiaoyan, Cui Xin, Dang Hongbin -
Influence of thermal inhibitor position and temperature on vortex-shedding-driven pressure oscillations
Abstract Vortex-acoustic coupling is one of the most important potential sources of combustion instability in solid rocket motors (SRMs). Based on the Von Karman Institute for Fluid Dynamics (VKI) experimental motor, the influence of the thermal...
2013 / Wanxing Su, Shipeng Li, Qiao Zhang, Junwei Li, Qingqing Ye, et al. -
Simulation Analysis of Certain Hydraulic Lifting Appliance under Different Working Conditions
Abstract Being typical of mechanical and electronic hydraulics appliance, hydraulic lifting appliance has many working conditions due to its particularities. Properties of hydraulic system decide high efficiency, security as well as stability under...
2012 / Huang Lei, Yuan Genfu, Chen Xuehui -
Runge-Kutta Method for Solving Uncertain Differential Equations2015 / Xiangfeng Yang, Yuanyuan Shen
-
Study on New Thermal Insulation Construction of Thermal Recovery Boiler
Abstract This paper analyzed existing problems of thermal insulation construction of thermal recovery boiler, and studied and designed a new thermal insulation construction of thermal recovery boiler. We carried out thermal insulation transformation ...
2012 / Zhao Haiqian, Liu Xiaoyan, Liu Lijun, Wu Yongning, Li Xiaohui, et al. -
Design of aerospace control systems using fractional PID controller
Abstract The goal is to control the trajectory of the flight path of six degree of freedom flying body model using fractional PID. The design of fractional PID controller for the six degree of freedom flying body is described. The parameters of...
2011 / Magdy A.S. Aboelela, Mohamed F. Ahmed, Hassen T. Dorrah -
Experimental investigation of embedding high strength reinforcements in extrusion profiles
Abstract Embedding reinforcement or functional wires in extruded profiles offers the potential to increase mechanical properties as well as the field of application. With improved strength and stiffness and an integrated function as deformation...
2008 / M. Schikorra, A.E. Tekkaya, M. Kleiner -
Compensation Strategies for Axis Coupling Effects
Abstract High dynamics of machine tool centers lead to high acceleration forces and, thus, may deform the machine structure and result in force coupling effects. In order to achieve high productivity combined with high path accuracy at existing...
2012 / Stefan Thoma, Sascha Weikert -
A Comparative Study of the Mechanical Properties of Single and Double Sided Friction Stir Welded Aluminium Joints
Abstract Aluminium alloys have a wide range of application in many key industries like aerospace and defence. It is necessary to have a high strength joint without much distortion in the above applications. In the present investigation, Al 1100 H14...
2012 / A. Ram Kumar, Saji Varghese, M. Sivapragash -
Experiment on the Heat Character of New Bioreactor with Newton Fluid
Abstract The system testing temperature profile of fluid in heat pipe bioreactor (HPBR) and heat pipe wall is set up, we measure and study effectively the whole HPBR's temperature profile of Newtonian fluid. To H2O system under all experiment...
2012 / Shu Xu -
Constraint Satisfaction Technology for Stacking Problem with Ordered Constraints
Abstract The stacking problem with ordered constraints (SPOC) is a typical combinatorial optimization problem and NP-hard character. In order to simplify problem, it is treated as a constraint satisfaction problem. A constraint satisfaction model is ...
2012 / Dong-liang Hou, Fang-rong Chen