Mechanical engineering topic list of research papers
-
Mechanical Decoupling Algorithm Applied to Electric Drive Test Bed2014 / Song Qiang, Luo Lin
-
Numerical Simulation of the Vibration Behavior of Curved Carbon Nanotubes2014 / Sadegh Imani Yengejeh, João M. P. Q. Delgado, Antonio G. Barbosa de Lima, Andreas Öchsner
-
A traffic flow phase adaptive routing for vehicular communication on highways2014 / Ping Wang, Fuqiang Liu, Dawei Li, Nguyen Van
-
Microstructure and mechanical performances of CGHAZ for oil tank steel during high heat input welding2013 / Guo-Li Liang, Shan-Wu Yang, Hui-Bin Wu, Xue-Li Liu
-
Analysis on the aerodynamic performance of vertical axis wind turbine subjected to the change of wind velocity
Abstract Reynolds averaged Navier-Stokes equations and Realizable kɛ− model were used in this paper, and the two dimensional unsteady flow field of the vertical axis wind turbine was simulated numerically at different wind velocity. The calculation...
2012 / Huimin Wang, Jianliang Wang, Ji Yao, Weibin Yuan, Liang Cao -
Study on the Development of the Medium-Scale Gas Explosion Integrated Testing System
Abstract Based on the characteristics of gas explosion in coal mines, the medium-scale gas explosion integrated testing system is developed. The integrated testing system is comprised of shock tube, testing section, explosion venting capsule,...
2011 / Xu Jingde, Xu Shengli, Zhang Yulong, Yang Gengyu, Zhang Licong -
Numerical Simulation on the Gas Explosion Propagation Related to Roadway
Abstract Based on the combustion, explosions and air dynamics and related theory etc, this paper describes the mathematical model of gas explosion in detail, combined with the gas explosion transmission mechanism, make a research on two wave-three...
2011 / Yan Aihua, Nie Baisheng, Dai Linchao, Zhang Qinqin, Liu Xinna, et al. -
Study on Design Method of Series Traction Rod of Heavy Machinery
Abstract The integrated design method of series traction rod of heavy machinery was studied. Based on topology optimization, parameter optimization design and reliability analysis, its integrated design method was proposed. Its topology optimization ...
2012 / Guozhi Zhang -
Combined perception and control for timing in robotic music performances2012 / Umut Şimşekli, Orhan Sönmez, Barş Kurt, Ali Cemgil
-
Thermal Efficiency Calculation of Composite Air-cooling System in Variable Conditions
Abstract Based on the steam, ammonia parametric, This paper programs to get the energy efficiency ratio of composite air-cooling system in variable conditions .Through the control variable method, it optimizes turbine back pressure, gets the...
2012 / Shenglong Wang, Hengxing Shang, Zhuang Wang, Zhidong Kang -
Multiobjective Reinforcement Learning for Traffic Signal Control Using Vehicular Ad Hoc Network2010 / Duan Houli, Li Zhiheng, Zhang Yi
-
Analysis of recoverable waste heat of circulating cooling water in hot-stamping power system2013 / Panpan Qin, Hui Chen, Lili Chen, Chong Wang, Xiaoxiao Liu, et al.
-
Inverse Prediction of Sound Insulation to a Wall with Apertures
Abstract With concerning a wall with apertures, which means there exists sound leak, the sound insulation of the wall is impaired severely. Under the meeting of the insulation requirement, inverse sound insulation prediction approach can be utilized ...
2012 / Xianfeng Huang -
The Driving Control of Pure Electric Vehicle
Abstract Pure electric vehicle has become the representative of new energy source auto because of its low level of environmental pollution, noise, high efficiency, availability of multiple energy resources, and ability of energy feedback. Pure...
2011 / Zhang Guirong, Zhang Henghai, Li Houyu -
Analysis and Verification of Surface Roughness Constitution Model After Machining Process
Abstract The process of surface roughness formation is complex and dependent on numerous factors. The analysis of the latest reports on the subject shows that mathematical relationships used for determining surface irregularities after turning and...
2012 / Edward Miko, Łukasz Nowakowski -
Nummerical Simulation in Influence of Forward-Facing Cavity on Aerodynamic Heating of Hypersonic Vehicle
Abstract A CFD study on the effect of forward-facing cavity upon aerodynamic heating on the hypersonic vehicle nose is conducted, by means of which the flow field parameters, heat flux distribution along outer body surface are obtained. The...
2012 / Haibo Lu, Weiqiang Liu -
Basketball free-throw rebound motions
Abstract A dynamic model is used to analyze the rebounding ball trajectories of free throws. The dynamic model previously described calculates slipping and non-slipping, and spinning and non-spinning motions at the contact point. First ball-contact...
2011 / Hiroki Okubo, Mont Hubbard -
Modeling of the Thermomechanical Process Effects on Machine Tool Structures
Abstract Thermally induced deviations are a key issue in the development of machine tools, especially when considering the actual trends of high performance and dry cutting. The interactions between the cutting process and the machine tool structure ...
2012 / Tobias Maier, Michael F. Zaeh -
Optimization of Hybrid Electric Bus Driving System's Control Strategy
Abstract The popularity of hybrid electric bus (HEB) is a most realistic way to solve emission and energy problem currently, so it's important to improve the HEB's fuel economy and efficiency. This paper optimizes the HEB's driving system to satisfy ...
2011 / Yafu Zhou, Shiqi Ou, Jing Lian, Linhui Li -
Free Vibration Analysis of Functionally Graded Beams with General Elastically End Constraints by DTM2012 / Nuttawit Wattanasakulpong, Variddhi Ungbhakorn